Resume - Experienced Piping Design Engineer

Misco Jobs

Resume #51695

CONTACT INFORMATION:
View contact information...

PROFILE

16 years experience in power plant engineering and design
With extensive experience in preparing layouts and piping detailing works
Experienced in AutoCAD and Microstation, knowledgeable in Bentley Explorer and Bentley Navigator
With strong inter-personal skills and good communication skills
Ability to produce quality reports

II. EDUCATIONAL BACKGROUND

Elementary: Oslob Central School
Oslob, Cebu, Philippines
High School: St. Mary's Academy
Oslob, Cebu, Philippines
College: University of San Jose – Recoletos
(Formerly Colegio de San Jose-Recoletos)
Cebu City, Philippines
Course Graduated: Bachelor of Science in Mechanical Engineering
(BSME)
Others: Passed the Civil Service Examination
(1980)
Passed the Mechanical Engineering Board Examination
(1981)

III. WORK EXPERIENCES

A. MTS office:
Company: MHI Technical Services Corporation (MTS)
(1990-Present)
Address: BPI Buendia Center
27th Floor, Sen. Gil Puyat Avenue,
Makati City, Philippines
Position: SENIOR PIPING ENGINEER 2
Department: No.1 Plant Design Section
Job Descriptions:
- Presently assigned to lead & supervise design works in our latest project in Mexico. Review & check PDS 3D models if piping are correctly inputted as per piping plan & P&ID. Also, review piping connection on equipment nozzles. Check and solve piping interferences. Operate PDS and use Bentley Navigator or Explorer for model review and interference check. Make conceptual piping layout for small bore piping. Work coordination and prepare weekly progress report.
- Completed the design works of underground piping for our power plant project in Saudi Arabia. Prepared conceptual piping layout for underground piping and prepared list of materials for procurement. Reviewed and checked PDS models if piping were correctly inputted as per piping plan and P&ID. Checked and solved piping interferences. Prepared isometric drawings using AutoCAD and Microstation.
- Checked piping layout & interferences of PDS-3D model using Bentley Explorer or Bentley Navigator, prepared piping isometric drawings for shop and site fabrication using AutoCad, Isogen and Microstation, checked piping according to P&ID, checked detail of piping connection, checked piping specifications, design pressure and temperature, prepared field & shop welding procedure, prepared bill of materials, pipe assemblies, pipe cutting plan and welding procedure, familiar to use Power Piping (ASME B31.1), Factory-Made Wrought Steel Buttwelding Fittings (ASME B16.9) and Welded and Seamless Wrought Steel Pipe (ASNSI/ASME B36.19)

B. OVERSEAS ASSIGNMENTS:
B-1. MHI Nagasaki Office (October 2004-September 2005)
- Assigned to work as Piping Detail Engineer and Job Coordinator for BLCP Power Plant Project, 375MW x 2 Units in Thailand.
- Checked piping isometric drawings.
- Prepared and checked piping isometric drawings using Isogen and Microstation.
- Checked Bill of Materials, Pipe Assemblies Table, Pipe Cutting Plan and Welding Procedure.
- Sent/Received drawings to/from our Philippine office.
- Performed PIDIS (Piping Data Integration System) operation.

B-2. MHI Kuwait Power Plant Project (1996-2003)
- Assigned to work as Piping Design Engineer and Coordinator in Sabiya Power Plant Project (300MW x 8 Units), Kuwait.
- Handled piping problems encountered during piping erection in pump house, outdoor piping, tank yard, boiler and turbine areas.
- Submitted piping modification plan to client and their consultants (M&M-UK) for approval.
- Also, submitted detail drawings of additional steel platforms/access on valves or equipment for client's approval.
- Checked shortage piping materials and purchased locally or ordered directly from Japan.
- Supervised the re-boring of 100 sleeves of butterfly valves shaft (sizes from 400A to 1800A) that were already installed due to valve sticking during summer time.
- Handled valve tagging of all mechanical and piping scopes.
- Prepared detail drawings of strainer, hopper, rubber lining pipe spools, vertical steel ladders, steel platforms, special flanges, orifices (single & multi-stage) and pipe supports for fabrication and procurement from local supplier.
- Supervised the installation of additional 25 A/C units in Electronics Room as additional works as per client's defect list.
- Helped in the submission of final documents such as Shop Test Reports and O & M Instruction Manuals to client.

B-3. MHI Nagasaki Office (3 years between 1991-1996)
- Assigned to work as Office Engineer and Job Coordinator under one of MHI departments, Energy and Environment Engineering Section (formerly Combustion Engineering Section) responsible in oil piping, pump house, tank yard, burner firing equipment and windbox.
- Prepared piping arrangement around pump house area.
- Prepared piping isometric drawings for shop and site fabrication.
- Checked piping according to P&ID, connection detail between piping & equipment.
- Checked piping specifications, design pressure and temperature.
- Prepared piping supports arrangement and details.
- Prepared detail drawings of boiler windbox assembly for fabrication.
- Prepared steam traced piping arrangement around pump house, tank yard, outdoor rack and boiler.
- Prepared coal piping arrangement and detail drawings.

B-4. MHI Saudi Arabia Power Plant Project (1991-1992)
- Assigned to work as Piping Assistant Engineer in Qurrayah Power Plant Project, (600MW x 4 Units), Saudi Arabia.
- Checked site piping around Turbine area and solved piping interferences by submitting design changes to client for approval.
- Prepared As-Built drawings for shop & site fabrication piping.
- Checked piping as per P&ID and updated it.

B-5. Engineering Equipment, Inc. (EEI): (1987-1988)
Philippine address: Libis, Quezon City, Philippines
- Assigned to work as Instrument Fitter in Kuwait National Petroleum Company (KNPC) refinery project in Mina Abdullah, Shuiaba, Kuwait wherein the main contractor was Braun Transworld Corp. (BTC) U.S.A.
- Installed field instruments, impulse piping & supports.
- Installed pipe steam tracing & supports.
- Fabricated piping and instrument supports.

C. LOCAL ASSIGNMENTS
C-1. Philippine National Construction Co. (PNCC) (1985-1987)
Address: EDSA, Mandaluyong City, Philippines
- Assigned to work as Instrumentation Engineer 3 in Philippine Phosphate Fertilizer (PHILPHOS) fertilizer project in Isabel, Leyte, Philippines.
- Supervised all instrumentation erection works of Sulphuric Acid Plant wherein the main contractor was Mitsubishi Chemical Engineering Corp. Tokyo Japan.

C-2. Unitech Engineering Corporation Shaw Blvd. (1982-1984)
Address: Mandaluyong City, Philippines
- Assigned to work as Instrumentation Engineer 1 in Philippine Associated Smelting and Refinery (PASAR) refinery project in Isabel, Leyte, Philippines
- Supervised all instrumentation erection works of Oxygen Plant wherein the main contractor was Marubeni Corp., Japan.

IV. SKILLS
- Knows the following operation of MS Office, AutoCad 2005 (2D & 3D), Microstation, Isogen, Bentley Explorer, Bentley Navigator and PDS.

V. REFERENCES FURNISHED UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 10816)

Go to Search Parameters...

Brief Description

Experienced Piping Design Engineer

System Analyst with 16 years experience. Skills - Visual BASIC, MS SQL, Oracle, OSA

Responsible for all accounting activities from trial balance to financial statement and balance sheets and financial report from time to time, supervision & control of financial, cost & management accounts of the company up to finalization

25 years of experience in the oil and gas industry working with various companies on varied projects from the office phase to final production and beyond.

Petroleum Engineer with working knowledge looks for a new job focused in steady-state and transient simulation, especially on flow assurance projects evolving subsea systems and deepwater operations.

More than nine (9) years of experience in the field of piping design engineering and construction of various oil & gas refineries and geothermal power plants. Has the ability to do piping layout and design which include pipe routing with proper flexibility, special pipe support detailing and isometr

12 years of experience in Instrumentation and Control at varying capacities and responsibilities. Proficient in process measurement and control systems of different makes and types in varying process plant including Gas and Oil Separation Plant, Power, Fertilizer, Chemical and Desalination Plants.

Procurement & Supply Chain Management

Has twenty one (21) years of experience in the Field of Engineering, Design and Construction. Experienced in Front End Eng’g, Preliminary Eng’g & Detail Eng’g / Design Phase Work-share Execution, and Construction / Final Design / Eng’g Support for Construction / As-built Phase & Quantity Surveying.

Operations Manager, Technical Advisor, trainer, Senior Supervisor

Well Experienced with Siemens, ABB, Holec, GE, Alsthom and Merlin gerin HT & LT

Worked on prestigious projects for multinational organizations like Saipem-Eni FPSO (Floating Production Storage and Offloading) Vitoria BRAZIL, TOTAL ELF PETROLEUM, IOOC-IRAN, HYUNDAI ENGINEERING CO., LTD, like LIBYAN Sirte Oil Company (SOC), Snamprogetti-Eni (Group), in QATAR PETROLEU

Piping Designer

Having 15 yrs of petrochemical,oil& Gas and LNG plant experiences.

20 + years of job experience majoring in the Telecommunications sector. Working and servicing for several major Oil & Gas companies and Commercial Telecommunications companies.

I have been doing Sandblasting/Painting for 18 yrs. Over the years I have become more and more skilled. I have used just about every industrial paint there is (for example) zinc, red oxides, high builds, 890, urithane, epoxies, and etc.... I have knowledge with airless

Senior registered Professional Engineer with over thirty years of experience in management, drilling and production engineering, planning and operations.

Having More than 5 Years of experience in Scaffolding Safety Supervisor in marine industries and 3 Year Senior Site Safety Supervisor. Developing Reporting System, Setting up of Performance Standards, Financial Analysis, Ratio Analysis, Performance Analysis, Monitoring, Policy formulations, etc.

WELL TESTING & WELL HEAD OPERATION , CONTROL ROOM , CENTRIFUGAL & RECIPROCATING COMPRESSOR AND PUMP OPERATION „« WATER INJECTION, CHEMICAL INJECTION & GAS INJECTION „« DAILY PRODUCTION CALCULATION & SHUTDOWN OPERATION „« UTI

ANST NDT LEVEL III (UT, RT, PT, VT, MT) , CSWIP 3.1 Welding, CSWIP BGAS Painting Inspector Gr. 2, 12 years exerience in Quality control for inservice inspection and project inspection Pressure Vessel, Piping, pipelines

intools (smartplant instrumentation, smartplant review), microstation, autocad. Field walkdown sketching of instrument locations and conduit routing.

Chemist with more than 6 years experience in field of Thermal & Power and Desalination plant

Working with Seaways International Group Holding Company Limited, Dubai as Crewing Manager since March 2004 till date.

B.E Chemical Engineer

10 years experience working in in-house seismic processing and Field QC processing around the world

B.Sc. Mechanical Engineer. Over ten years experience in maintaining, overhauling and technical support for rotating equipment used in the oil and gas industry. Experienced with budgets, scheduling, calculation and analysis of rotating equipment repair requirements.

Chemical Enginner with more than seven years experience in the process and manufacturing field. Also, I have experience in sales.

Senior Lead Project Engineer with 7 years of Oil & Gas experience in areas of Topside package / project engineer, Marine & Utility, Regulatory Compliance. Vast experience of working in different type of projct like FPSO modification, LPG Ships, Semi-submersible drilling rig, Fixed Platforms, TLP

Reservoir Engineer with more than 7 years of professional training and experience in areas such as sub-surface, Production, Surface and Facilities Engineering as well as conducted research, aplied the latest technology, and gained experience in some field operations.

Work experience within the Oil & Gas industry and Materials Control for 10 years

I am Pugazhenthi. S, did my electrical and electronics engineering in 1999. I am working as Project E&I Manager in Sudan for the Project of CPF and well head development at Rotary Mec Sudan Branch. I am having 10 yrs experience in Project Management, Project Planning, Site supervision, Testing, Comm

SIVAKUMAR - QC Welding Inspector

Senior Drilling Engineer with more than 10 years experiences in Drilling, Measurement and Logging While Drilling. Outstanding background in field operations especially in drilling related job. International work experiences as Drilling Engineer, Directional Drilling Engineer, Rotary Steerable System

I am a chartered Engineer with ten years experience in the area of Instrumentation & Control. I have a 2(H)1 degree in instrumentation & Control from the University of Teesside, Middlesbrough, U.K. My experience spans trades, E+I design, senior/lead office roles in a global consultancy, site commiss

Use my skills and experience for your mission critical UNIX Infrastructure

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

I am having experience in Both static & rotating equipments

BE Chemical

I completed B.S. Chemical Engineering and I have 19 years working experience in Refineries and Gas plants in which 9 years worked as a Shift Supervisor. At present I am working with multinational workforce in Adnoc, Ruwais Refinery, Abu Dhabi, UAE.

Electrical technician:Plus 28 years of experience at drilling rigs. Electric & electronic maintenance at many kind of land rigs,with "IPS", "Ross Hill"& "GE" SCR's Drive systems,Varco TDS4 & TDS11SA top-drive, Kato generators,GE,Toshiba,Reliance DC motors,etc.English,Spanish Italian and Portuguese l

Basic and detail design of electrical power generation, distribution & utilisation system and various system studies as short circuit & earth fault study, relay co-ordination study, load flow study, motor starting & voltage drop study etc primarily in manual in the beginning of career and later in E

Twenty-nine years experience in production operations, twenty-five years in an offshore oil and gas environment.

Project Manager/Engineer with 25 year experience in Oil and Gas Pipeline and related Stations. USA Professional Regestration Mechanical Engineer and Certifiec projectmangement Professional PMI USA. Oversea work prefered including remote sites. Currently with Saudi Aramco, Saudi Arabia.

SKILL SETS. Purchasing Department Director for a large International Organization, Contract Negotiation, Vendor Selection Process Management, Projects Management and Follow Up, Inventory Control Management, Strong Computer Skills

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

Senior Project Manager/Engineer (Offshore Projects)

I am interested in helping to improve the workplace morale of oil rig workers by conducting highly interactive and motivational workshops.

International Geophysicist with over 23 years experience in all facets of petroleum exploration, created and promoted prospects through use of seismic and well data. Expertise in use of Geoquest and LandMark geophysical software, experience in both 2D and 3D data acquisition and processing.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out