Resume - 10 Years experience as Process Operator in OIL & GAS, PETROCHEMICAL and CRYOGENI...

Misco Jobs

Resume #51988

CONTACT INFORMATION:
View contact information...

CAREER PROFILE

* 10 Years experience in OIL & GAS, PETROCHEMICAL and CRYOGENIC plants
* Hands-on experience in Process 0peration and Projects
* Hands- on experience in Operating the Process plant by DCS
* Expertise in providing Technical & engineering supports to process plants.
* Expertise in Process Trouble shooting and resolving operational issues
* Familiar with HAZOP Techniques, HSE, and case studies
* Reading of PFD, P&ID, Erection/installation of Process equipment/piping and plant commissioning
* Experienced in handling marine oil jetty operation
* Experienced in handling Gas distribution network
* Having knowledge of Total Productive Maintenance for Energy Conservation and Safety Management Concepts
* Being a Hardworking and achievement pioneer through Innovative thoughts.
* Operating knowledge of computer- MS Office and Internet related operations.
EXPERIENCE DETAILS

PRESENT KUWAIT OIL COMPANY (KSC) (from MARCH 2005)
Kuwait

Kuwait Oil Company is the leading company having Exploration, Drilling and Production of Oil and Gas within the state of Kuwait,
FORMAL POSITION: Process Operator
Operation and Supervision of Gathering Center and Water Injection Plant in control room, This unit is Automated by Distributed Control System (DCS),DELTA V from EMERSON.
Experienced in handling the following Main components and Major Mechanical equipment that handle the process in Gathering centre and Water treatment unit,

* Incomer Header.
* Separators.
* Desalters.
* Water injection and Disposal operations.
* Crude storage tank.
* Gas handling system.
* Flare system.
* High pressure centrifugal pump.
* Compressors.
* Generators.
* Large and small volume balance tanks.
* Hydromatic deep bed filters.
* F&G and ESD logics.
* Pigging Operations.

PREVIOUS EXPERIENCE (May 2004 to Feb 2005)
REFRIGERATION AND OXYGEN LIMITED
Kuwait
It is one among the leading Cryogenic Plant in Production of Liquid Oxygen, Liquid Nitrogen and Liquid Argon in the state of Kuwait,
FORMAL POSITION: Process Operator
Operation and Supervision of Air separation plant, in Control room Operations. This Unit is been automated by using Distributed Control System (DCS) from ABB Automation and Vantage control system.
Experienced in handling the following Main components and Major Mechanical equipment that handle the process in Cryogenic plant.

* Multistage Centrifugal compressor.
* Air drier.
* Gas booster
* Turbo expanders.
* Cold box unit with distillation column packed with perlite powder
* Plate type heat exchangers.
* Nitrogen gas liquefier.
* Reciprocating compressor operated at 2200PSI.
* Argon skid.
* Coolers.
* Vacuum insulated storage tanks.
* Gas distribution network.

EXPERIENCE IN CRYOGENIC LIQUID MOVEMENT:
Operation Tank Farm for Cryogenic liquid Oxygen.liquid Nitrogen and Argon.Handling loading and unloading operation of cryogenic liquid to mobile tankers.

COMMISSIONING EXPERIENCE
* Having experience in commissioning and pre-commissioning of the Pressure operated Distillation section with cold box.
* Experience and knowledge in pressure testing (Hydro and Pneumatic) for lines and vessels.
* Commissioning of centrifugal compressors. boosters. turbo expanders.
* Instrumentation elements.
* Inspection of equipments and process flow lines meet as per the design before boxing up.

PREVIOUS EXPERIENCE (Dec 1997 to May 2004)
THIRUMALAI CHEMICALS LIMITED
Ranipet,Tamil nadu, India
A leading Petrochemical Industry in India. Having ISO 9002 and ISO 14001, Asia's largest manufacturer of Phthalic Anhydride and Maleic Anhydride and Food Acids
FORMAL POSITION: Production Supervisor
Operation and Supervision in both Field and Control room of Maleic Anhydride Plant. This unit is automated by DCS from YOKOGAWA MICRO XL,
Experienced in handling the following Main components and Major Mechanical equipment that handle the process in Maleic Anhydride unit.
* Reactor: Fixed Bed Catalyst filled Reactor with salt bath cooler.
* Heat Exchanger: Gas Cooler using Boiler feed water with steam Drum, Condenser, coolers. kettle type and internal reboiler.
* Separators: Gas liquid separator. decanter. and Reflux accumulators,
* Distillation column: Azeotropic, Vacuum and Scrubbers.
* Pumps and Compressors: Single stage and Multistage Centrifugal type fluid pump and compressors.Single stage and Multistage reciprocating type pump and compressors.Gear pumps,water ring type vacuum pump.
* Blower: Motor driven and steam driven Blowers.
* Turbine: Extraction cum condensing type Steam Turbine

EXPERIENCE IN OIL MOVEMENT: Operation of Tank Farm of Ortho Xylene, Benzene, H.S. Diesel and Furnace Oil. Having experience in Ship (Tanker) unloading operation of Benzene at New Mangalore Port Trust.

COMMISSIONING EXPERIENCE
* Having experience in commissioning and pre-commissioning of the Atmospheric pressure operating Distillation section. in Expansion project of maleic anhydride plant
* It is an Azeotropic distillation where Maleic anhydride separated from Maleic acid by the use of third component O-Xylene.
* Inspection of trays and its arrangements, following the system cleaning, pressure test and commissioned the system.
* Having the commissioning experience in the other system like crystallizer, filters, pretreatment vessels, flow lines.
* Experienced and knowledge in pressure testing (Hydro and Pneumatic) of lines and vessels.

PREVIOUS EXPERIENCE (Sept 1996 – Aug 1997)
BHORUKA GASES LIMITED
Bangalore,Karnataka,India
It is one among the Bhoruka Group of Companies and also one of the Largest Air Separation Plant in Production of Liquid Oxygen, Liquid Nitrogen and Liquid Argon in South India with Capacity of 120 TPD. It is technically collaborated with Linde, Germany.
FORMAL POSITION: Supervisor Trainee
Operation and Supervision of Air separation plant, in Field and Control room Operations. This Unit is been automated by Distributed Control System (DCS) from YOKOGAWA and Programmable Logic control (PLC) from SIEMENS.
Experienced in handling the following Main components and Major Mechanical equipment that handle the process in Cryogenic plant.

* Multistage Centrifugal compressor.
* Air drier.
* Gas booster
* Turbo expanders.
* Cold box unit with distillation column packed with perlite powder
* Plate type heat exchangers.
* Coolers.
* Vacuum insulated storage tanks.
* Cryogenic pumps.

MY PRIMARY FUNCTION AS FIELD OPERATOR:
To Operate the plant equipment safely and efficiently in accordance with the plant operating procedures and prevailing company rules and regulations.

DUTIES AND RESPONSIBILITIES:
* Following the company health.safety and environment policies.
* Participated in commissioning activities and carrying day to day operation.
* Coordinating with other field operators in day to day duties.
* Participated in development of Operating Procedures,Standard Instructions and technical safety dossier.
* Carrying out the Plant start up activities in accordance with the Operating Procedures.
* Operating Safely and Efficiently all outside machinery and related equipment in a proper manner.
* Performing minor maintenance activities as per agreed procedures.
* Receiving chemicals and preparing chemical addition for the process.
* Carrying out periodical tests and verifying to ensure the process and safety equipment is in good working condition.and Carrying out routine check up on equipments for abnormalities.
* Reporting anomalies,generating work orders and shut down reports.
* To sign work permits following on-going jobs and monitor Contractor activities.Considering the safety regulations and procedures and stop unsafe permits and activities.
* Assisting in troubleshooting and proposing changes to improve the safety and availability of the installations.
* Maintaining proper housekeeping.
* Communicating and following instructions of shift engineer and panel operator and carrying out is instructions efficiently and safely

MY PRIMARY FUNCTION AS PANEL OPERATOR:
To monitor and co-ordinate the day to day operations of the assigned unit in accordance with the company approved Procedures and Instructions in safe and efficient manner by DCS.

DUTIES AND RESPONSIBILITIES:
* Complying with all company Health,Safety and Environmental policies and procedures.
* Monitoring the operational activities of my assigned area, through DCS,and co-ordinating the process activities according to instructions and production requirements.Operation of F&G panel. ESD & level shutdown logic.
* Maintaining Continous contact with the duty Personnel,Informing them the current operating conditions,Laboratory results and action is taken to maintain within the agreed operating parameters.
* Having continuous liaison with the Panel Operators of other areas and co-ordinating them in operations that effect the operation and production or any unit within the plant.and synchronising activities is also done to minimise loss of production.
* Adjusting operating conditions or product flow and allow field operator to isolate
Equipment for maintenance and resume operating condition to normal following of maintenance.
* Keeping myself aware on ongoing maintenance work by reviewing permit to work records and operating logs.
* Co-ordinating with the Maintenance for equipment change-over and instrument loop checking.Endorsing related Permits to work and raising Maintenance work orders as required.
* Developing trends in operating conditions,reporting significant changes and initiating action as required.
* Acting good communication point between Shift Engineer and Field Operators during emergency situations.
* Supporting company Safety,Environment and Quality Policies,Programmes. and
Carrying out the specific duties and responsibilities related to my job as dictated in the Management System Manual,Safety Manual and other related documents.
* Maintaining shift log, initiating emergency procedures as required as per company safety rules and regulations.

FIRE & SAFETY:
* Undergone firefighting training by using various type of fire extinguishers.
* Having the knowledge of wearing personnel protective system & First aid activity.
* Knowledge of issuing work permit and the safety measures.
* Having the awareness of Health, Safety and Environment (HSE).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6551 to 6600 of 10922)

Go to Search Parameters...

Brief Description

Multi-skilled, highly motivated and tenacious candidate with extensive skills in advanced drilling techniques, drilling engineering, production technology, well completions and workovers, reservoir engineering, team work and analytical and research competencies, developed through group seminar prese

i am engineer in chemical engineering and i have 6 years experience in crude oil treatement and 01year in gas treatement ,i am supervisor

8 + years experience in Instrumentation and Control, DCS field equipments (Yokogawa DCS & Field instruments). Good Knowledge on DCS, Pressure, Temp, Flow and Level devices, Control valves, analyzers and euipments. Additional Fieldbus Knowledge.

SH&E and Loss Prevention Engineer, provide services to exploration drilling, transportation and other facilities. Acts as advisor to Field Operation Manager on SH&E issues. The services are Site & Facility Audits, Fire Protection, Hazard Identification, Risk Assessment and the implementation of Op

Seeking a quality environment where my knowledge can be shared and enriched. Searching for a better opportunity where I can implement my expertise, programming skills, project management skills and administrative skills.

I am not very sure what a resume summary should say. This resume will tell you that I am a motivated individual willing to get into the engineering field. If you have any questions please let me know.

B.Tech in Mech Engg

I will be graduating this April 2009... hoping to get a job.

20 years experience in DCS, SCADA, Controls, Commissioning, Design and engineering worldwide

PLANNING , MOETHODS MAINTENANCE ENGINEER

Qualification : Diploma in Civil Engineering, Professional Skills : Planning & execution of works as per the drawings & client/company’s requirement. Quantity Surveying, Billing, Man Management, Material Procurement, Labour control & over all Supervision of work.

Health & Safety Inspections (OSHA, MSDS)

Human Resource management, Auditing and Account management. B. Sc in Accountancy, Associateship- ICAN, Graduate member, Nigeria institute of Management and Student member, Chartered Institute of taxation of Nigeria.

I have BCs of process (Chemical) Engineering with five years expoerince in oil & gas plants design.

Piping field and desginer, project engineer coordinator /hdpe expert

I am Bachelor of Commerce with superior working familiarity.

Well testing Senior Operator.

Experienced Oil & Gas Project HSE advisor with QA/QC background. Excellent communication and writing skills, highly capable with languages and graphic presentations. Successeful in onshore & offshore construction projects in America, Europe, Africa and Asia.

To act as engineer of reservoirs, petrophysics or drilling, in oil or gas reservoirs. To generate the biggest added value to the Company contributing with effective and highly profitable solutions.

DRILLING MATERIAL COORDINATOR

Drilling,Estimation,Quantity Surveying

Safety co-ordinator in one of the world reknowned MNC M/s Owens Corning india ltd. Engaged in implementing safety policies, conducting departmental meetings on safety as per the countries regulation. Preparing safety audit report for top management.

I have installed, serviced, maintained, repaired centrifugal and reciprocating compressors, turbines, pumps, blowers and drivers.

Experienced domestic and international project manager. Well versed in project management and cost management best practices coupled with delivering successful project and software implementations.

Naval Architect with 10 years experience in Inspection, QA/QC,ISO 9000,Project Management,General Administration in Marine,Oil & Gas Industry in the United Arab Emirates.

Simulation, Calculations for PSV, HE, Separator , HYSIS and Design II

CAD: Microstation V 8,Microstation 95 (ver 05.05.01.65), Microstation SE (ver 05.07.00.25),Microstation/J (ver 07.01.01.36), I/RAS B (ver 06.00I/RAS C (ver 08.00),Descartes (ver 6.0)Autocad

I have three year diploma of mechanical technology. Two year apprenticeship in rotating equipment from FFC fertilizer plant pakistan and 06 year experience in petrochemical plant of rotating and static equipments.

Rig mechanic, rig technician

diploma in petrochemical with 4.0 years of experience in refinery operation as process field operator

Presently working with Pakistan Oilfields Ltd. As Assistant Engineer Since March 2006 Responsible for plant operation and Troubleshooting, Production data Management, Product Quality, Equipment Performance, Fuel and Energy Conservation.Gas Purificati

Instrument Design System i.e. INTools DCS Specification/Configuration Contracts and Budgetary Management Installation engineering/Commissioning Maintenance engineering, procedures and fault diagnostics

AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2007, 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2005; Planning and Scheduling w/ Primavera Project Planner, User of Windows XP and NT + Microsoft Office applications

Seismic adquisition, oil data management, geology, mining management

With a career spanning over Four (5) years in the field of Fire & Safety Management, has gained exposure in Health, Safety and Fire procedures.

Master Mariner

My name is RAJENDRA T CHAVDA, I am INSTRUMENT TECHNICIAN, I have working exp. in this field more then 7.5 years. before i was working Russia and Abu bhabi (OFF SHORE) and India chem. and petro. chem Being given to understand from reliable sourse that thei

Supervisor, Quality, Process, wastewater

Pipeline Welder and Operator

Instrument and Electronics Technician

SCADA Engineer

I have a knowledge of Oil Movement and loss / gain working. I have done tanker handling,oil movement,decatation,T/L loading and HSE requirements

I am graduated in Petroleum &Gas engineering and have total experience in drilling engg & Drilling technology, such as Drilling engineer, Night Pusher & Night Company man.

Civil Site Engineer / Civil Inspector ; Field of Experience:: Onshore Plant, Multistory Building, Shopping Complex, Residential Villas and Landscaping Works, Water & Sewage Pipelines; Qualification:: Diploma in Civil Engineering (1995- 1998); Diploma in Auto CAD 2000, 2D & 3D, Windows, MS Office

Ability to perform Instrumentation Installation, Maintenance, Commissioning & Inspections

11 years expereince in microstation

Field Service Manager

The last position that I held was a Teller with Wells Fargo Bank. In this role, I administer general clerical duties, heavy cash handling, answered store phone, and was able to troubleshoot any issues that arise.

10 Years experience as Process Operator in OIL & GAS, PETROCHEMICAL and CRYOGENIC plants with Diploma in chemical engg

Mangement, and science

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 [ 132 ] 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out