Resume - A Uk based professional Chemical/ Process Engineer with 20 years experience in v...

Misco Jobs

Resume #5201

CONTACT INFORMATION:
View contact information...

Specialist environmental equipment and plant supplier (SBR's, aeration, composting). Short term contract Process Engineering work and consultancy.

• Contract Manager at Texaco's Pembroke Refinery. Responsible for the man management, process and maintenance of the waste water treatment plant and sludge processing facilities. Responsible for co-ordinating and overseeing the sales of Nalco process chemicals (corrosion inhibitors, de-emulsifiers, por point supressants, flocculants, coadgulants) throughout the refinery (£1.6m /annum).

• Senior Design Consultant for Southern Water Working in a group of consultants on the feasibility for the construction and extension of sewage works to meet the tightening consents on quality of final effluent.

• Wardell Armstorng Consultants Preparation of feasibility study for the construction and operation of a Centralised Anaerobic Digester in Stoke-on-Trent.

• Stam Ltee, Mauritius. Prepared the FEED study for the construction of a landfill leachate treatment facility.

• 2000 - Winner of BIO-WISE Demonstrator Project competition, in conjunction with University of Leeds and Selden Research. Project for the biological treatment of waste water from a chemical manufacturing plant using a Sequencing Batch Reactor.

• Negotiated representative's agreement with a US manufacturer of process equipment. Sole representative in the UK and Europe for unique environmentally related processes and equipment.

• Obtained a grant from the DTI for the development of a novel effluent treatment process. This project was done in conjunction with Staffordshire University.

• British Nuclear Fuels Engineering. Member of the Process Engineering section of the project team working on the Sellafield Drypac Plant. Producing the Process Design for the £410 m plant. This plant is for the treatment of a radioactive sludge composed mainly of magnesium hydroxide. Duration of work was 1 year. Activities included preparation of Process Descriptions, Process Flow Diagrams, Engineering Flow Diagrams, Process Data Sheets, Instrument Process Data Sheets. Equipment sizing and specification. Interfacing with suppliers on development and design work. Conducting design and safety review meetings.

• Knight Piesold, Working as an associate, providing Process Engineering Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain.

• Knight Piesold, Working as an associate, providing Process Engineering. Technical services for process evaluation for the Active Treatment Design Report – Wheal Jane Minewater Project.

EXPERIENCE PRIOR TO FORMING ZYLO TECHNOLOGY

DORR-OLIVER Co Ltd October 1993-September 1995

Contractor/process equipment supplier. Active in Minerals, Chemicals, Pulp and Paper, Pharmaceuticals, Municipal Effluent and Industrial Effluent Treatment. Projects up to £20M in Fluidised Bed Incineration, Filtration, Thickening, Dissolved Air Flotation.

Business Manager - Environmental Systems October 1993-September 1995

Development and running of the Industrial Effluent Treatment Business. Tendering, negotiating, developing marketing strategy, Project Management.

• Developed a phosphate removal process from wastewater for Eli Lilly Pharmaceuticals, Cork.

• Approached by Dorr-Oliver to take the position.

• Implemented Failure Mode and Effect Analysis as a means to improved project execution.

MONSANTO plc

Batch Fine Chemical Manufacturer June 1992 - October 1993

Senior Project Engineer June 1992 - October 1993

Project Management and Cost Control. Development of Front End Packages, Premise Documents and Detailed Designs. Working in a TQM environment. Preparation of an application to the HMIP for the authorisation of a prescribed process under IPC.

• Successfully installed projects for acetone scrubbing vents and the pastillation of a molten polymer.

• First Project Engineer in Monsanto Europe to fully utilise CPM (Capital Project Management) on Pastillator project.

• Liased with and visited Monsanto joint venture in Korea during the Pastillator project.

AUGHINISH ALUMINA LIMITED (65% Alcan, 35% Billiton)
High temperature Bayer Process Alumina Refinery

Section Engineer June 1990 - June 1992

Responsible for process and maintenance within section. Supervision of two Engineers and a Technician. Processes within section included Counter-Current Decantation and Washing of red mud, red mud disposal, Multistage Evaporation, Effluent Treatment and Crystallisation,.

• Instrumental in implementing ISRS in Section (International Safety Rating System)

• Solved refinery water balance problems by installing new procedures for setting wash water control philosophy.

• Reduced section maintenance budget from £3.5m to £2.5m in two years.

• Deputised for Section Manager (73 employees in Section) Resolved labour dispute.

• Represented Aughinish at Alcan International Conference in Montreal on red mud and presented two papers.

DORR-OLIVER EUROPE March 1984 - June1990

European Industry Manager Designate for Pulp and Paper

Process and marketing support for sales of recausticizing plants (up to £3M), pulp filters and screens

• Youngest ever Dorr-Oliver Industry Manager.

• Award for outstanding performance.

Senior Process Engineer/Process Engineer/Applications Engineer

Laboratory and pilot testing (Thickening, Filtration, Effluent Treatment processes), mechanical design of process equipment, commissioning, specifying of ancillaries in projects.

EDUCATION

9 'O'-levels, 4 'A'-levels Chesterfield Grammar School
B.Sc. Honours in Chemical Engineering, University of Newcastle upon Tyne
Chartered Engineer
Member of the Institution of Chemical Engineers

COURSES INCLUDE

Many in Solid/Liquid Separation and Waste water

Monsanto Management Style
Capital Investment Appraisal
HAZOP
Full training in Total Quality Management
Centrifugation
Numerous papers (UK. Germany USA)

PERSONAL

Date of Birth 28th June, 1961 - Married - Two Children

INTERESTS

Caving - Swimming - Cycling – Jazz

LANGAUGES

French - - Spoken Fair
Written Basic

German Spoken Fair

SPECIFIC PROJECT EXPERIENCE 1984 to DATE

2003 Texaco Ltd, Pembroke, Wales Process Consultant for projects to tackle waste arising from processing DOBA crude. These were a heavy metals removal facility; incubator for nitrifying bacteria and carbonaceous substrate dosing. Additional process and project engineering for the refurbishment of API separators and the installation of a feed tank for the dewatering centrifuge.

2002 Wardell-Armstrong, Newcastle-under-Lyme. Feasibilty study for the construction of a Centralised Anaerobic Digester at the Chatterley Whitfield Mining Museum site in Stoke-on-Trent.

2002 Stam Limited, Mauritius. Front end Process Design for a landfill leachate treatment plant.

2001 Selden Research Ltd, Buxton. Design, supply and installation of a Sequencing Batch Reactor to simultaneously operate with anoxic and aerobic conditions in the same reactor. Following laboratory tests the design and specification of a full scale plant will be undertaken. Laboratory tests will be undertaken by Aqua Enviro at the University of Leeds

1997 to Imerys (formerly English China Clay International) Replacement of gearbox
2000 (centre drive) on 140 ft diameter clay thickeners.

1999 Lundbeck Pharmaceuticals, Teeside. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from a pharmaceutical factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 Camp Bros. (Café) Ltd. Scotland. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from an ice cream factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 to Knight Piesold, Ashford, Kent. Provided consultancy services on process design
2000 for the Wheal Jane Minewater Project.

1997 Knight Piesold, Ashford. Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain

1997 Lyons Maid Nestle. Conducted laboratory and pilot scale testwork to establish the treatability of wastewater by a Sequencing Batch Reactor

1995 British Nuclear Fuels Engineering Limited, Salford. Sellafield Drypac Plant. Process for screening and sorting radioactive silo contents (sludge and swarf).

1995 Aughinish Alumina, Limerick. Seed hydrate dewatering on large diameter vacuum disc filters. Prepared the Front End Design package and tender documents.

1995 Pfizer Pharmaceuticals, Sandwich. Front end design and tender for jet aerators, pipework, compressors and control equipment for activated sludge plant

1995 Texaco, Pembroke. Dissolved Air Floatation to remove oil from refinery wastewater. Pilot testing and Front End Design preparation

1994 Knight Piesold, at Wheal Jane Mine Cornwall. Initiated testwork to prove residual cadmium levels in treated minewater.

1994 Eli Lilly, Cork. Testwork to define a phosphate removal process from wastewater. Test report used to demonstrate BATNEEC to Irish EPA. Front End Engineering Package prepared for Eli Lilly. Thickener designed and sold.

1993 Monsanto, Wrexham. Project Engineer in plant manufacturing fine chemicals by batch processes.

1991 Aughinish Alumina, Limerick. Process definition for effluent treatment plant. Neutralisation, sedimentation and centrifugation of settled sludge. Hydrocyclone studies for hydrate thickening. Also commissioning of a Horizontal Belt Filter for the dewatering and washing of oxalate crystals.

1989 Laporte Inorganics, Widnes. Part of the commissioning team for two stage lime neutralisation and two-stage sedimentation process with underflow recycling.

1989 Cotton Valley Sewerage Treatment Works, Milton Keynes. On site tests to demonstrate improved underflow on Primary Clarifiers using diaphragm pumps.

1989 Reynolds Metals, Corpus Christi, Texas. Laboratory testwork to size and specify a Horizontal Pan Filter for dewatering and washing Alumina Hydrate.

1988 Acna Chemie, Genoa, Italy. Troubleshooting and modifications for chemical manufacturing process using Rotary Vacuum Filters.

1988 Alicel, France. Commissioning team on recausticisation process for Kraft pulp mill. Lime slaking, causticizing, dregs filtration, green liquor Clarification, lime mud filtration, white liquor filtration.

1988 British Sugar, Peterborough. Development of a novel approach to brown stock washing on proposed straw pulp mill.

1988 Hickson and Welch, Castleford. Laboratory based testwork on effluent coagulation and flocculation and neutralisation. Precipitated sludge then used to perform thickening tests and dewatering by filtration.

1988 Interalumina, Venezuela. Conducted site based testwork to size Horizontal Pan Filters for the deliquoring and washing of seed hydrate.

1988 British Steel, South Wales. Laboratory testwork and commissioning team for two-stage neutralisation of acid water using lime with underflow sludge recycling. Thickened sludge was subsequently pressed.

1987 Interalumina, Venezuela. Conducted site based testwork to prove performance of a Rotary Vacuum Filter in comparison with gravity thickeners.

1986 Tioxide France, Italy, UK and USA. Site based pilot tests to prove operation of the Press Belt Filter for the dewatering of titanium dioxide.

1986 Deanshanger Oxides, Milton Keynes. Testwork for the sizing and specification of a Press Belt Filter and a Horizontal Belt Filter. Commissioned the equipment.

1985 British Coal, South Wales and Yorkshire. Commissioning of two Horizontal Belt Filters for the dewatering of coal fines.

1985 May and Baker, Norwich. Effluent neutralisation tests using milk of lime and subsequent sedimentation testing.

1985 Corleone, Sicily. Pilot ultrafiltration tests for concentrating citrus oil.

1984 Jahncke Fruit Juices, Hamburg. Conducted lab and pilot ultrafiltration testwork to define process. Commissioning of the full–scale process.

PAPERS, PUBLICATIONS AND PRESENTATIONS

"Treatment of Effluent from a Small Industrial Cleaning Manufacturer using SBR Technology"
Presented at Biennieal Conference on Management of Wastewaters
April 2002, The Carlton Highland Hotel, Edinburgh, Scotland

"Sequencing Batch Reactor Technologies – Packaged Systems for Small Communities"
Presented at conference entitled "Sewage Treatment Strategies for Coastal Areas and Small Communities"
December 1999, Edinburgh Conference Centre, Scotland

"Environmental Biotechnology"
Presented at Biowise Seminar run by DETR
April 1999, Nottingham, UK.

"Sequencing Batch Reactors for Small Applications"
Presented at a course entitled "Sequencing Batch Reactors 2"
September 1998, University of Leeds, UK.

"Tightening the Paper Mill Water Circuit Using Wedge Wire Screens"
Paper Industry Technical Association Symposium on the Environment.
April 1995, Maidstone, UK.

"Selection and Scale Up of Continuous Filters - Experimental and Calculation Procedures".
Presented at the Filtration Society 30th Anniversary Symposium.
September 1994, Birmingham, UK.

"Treatment of Mixed Effluent from a High Temperature Bayer Process Alumina Refinery".
To have been presented at a conference -"Waste Water Treatment in the Process Industries".
September 1992, Birmingham, UK. The conference was cancelled.

"Aughinish Alumina Mud Stack and Storm Water Management"
"Red Mud Filtration, Viscosity Reduction and Pumping at Aughinish Alumina"
Both presented at "Mini Symposium on Red Mud Handling".
October 1991, Alcan Headquarters, Quebec, Canada.

"The Development of New Applications for the Vacuum Drum and Press Belt Filter".
Presented at 5th World Filtration Congress
May 1990, Nice, France.

"Vacuum Filters for a Wide Range of Applications in the Bayer Process".
Presented at the TMS Conference.
February 1990, Los Angeles, California, USA.

"New Horizontal Belt Filters for a Wide Range of Applications".
Presented at the Filtech Conference.
September 1989, Karlsruhe, Germany.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 9905)

Go to Search Parameters...

Brief Description

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Project MGT, MGT of E/C companies - pipelines on & offshore, prod facilities, EPC

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

I an am executive with 24 yrs of experience with success in start up, strategic planning, product management, sales and marketing, cost control, technology transfer of engineering/equipment /turnkey system being part of global cross functional team for strategy building and success in the region.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

Overall I have 19 years of experience in the field of Project Management, Administration, Secretarial, Document Control, Personnel and Procurement. For the last twelve (12) years I am working with Saudi Aramco and Petrokemya?s various GAS EPC projects.

Charted Engineering marien & mechanical engineering with PHD in Engineering management,20 Years experience as senior corrosion engineer in mining and petroleum industries. With 15 years in engineering management. Specialist engineer coating and Cp design.

I am a Project Manager/Mechanical Engineer with 33 years experience in both, International & local projects.

2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 ABB s.r.o. Czech Republic 2000-2001 T.I.A.b , Romania 1999-2000 Progeco Sistemi Group, Italia 1998-1999 I.P.I.P. , Romania 1980-1998 Upetrom S.A. Romania

Directing and maintaining the QHS&E efforts of the Region, to conform to Company policy, regulatory, and customer’s requirements. Developing Region policies, procedures, and related documentation. Interact with client HSE departments to ensure understanding of HSE Systems.

I am a no non-sense safety professional with a serious work ethic to accomplish company goals and objectives. I have over 20 years of HSE management experience with the last two years working in Russia on World-class Projects.

My skills are developing training plans & tracking using SAP, managing training records, training technicians developing CBT modules. Creating operating procedures, training modules. Word proc & Tech writing, Power Point, Outlook, Excel, SAP, Front Page. Inc/Acc Invest, TDC3000 & DCS operating, SWP

Ist class Chemical Engineer with vast experience in operation , Project Management , Engineering Management , Commissioning Management in Fertilizer , Petrochemical and refinery field.

Twenty five years in managing remote area field construction and logistical operations through out Asia. Construction of air strips, heli-pads, camp facilities, drilling location. Subsea Fiber Optic cable landing operations and post lay burial operations on and off shore.

Mechanic Engineer

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

DCS system engineering design, configuration, installation & commissioning.

20+ yrs in management and technical consultancy for the international oil and gas industry. Experience in organisation and business process development, change management, management systems and procedures, business performance review and development, HR and training management.

Regional office manager position handling material, transportation, local contracts, housing, food, utilities. Fluent in ARABIC, ITALIAN, SPANISH, ENGLISH, GREEK. Knowledge of Libyan culture, religion, customs, geography, and geopolitics.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Possess over 25 years experience onshore and offshore in the Health, Safety and Environmental Field.

Senior Project Manager with 25+ years of experience in the Oil and Gas industry. Extensive international experience on numerous EPC projects, both Lump Sum and Reimbursable. Excellent track record of delivering projects on time and under budget. i.e. profitable. Long list of satisfied clients.

Achievement-oriented professional with extensive experiences as HR & administrative executive with large exposure in Oil & Gas sector, with a strong background into project/ branch based organisations. Graduate degree and Master's Diploma in Business Administration (MDBA).

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

Polyester, Nylon,extrusion,plant management, manufacturing, sales

Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.

Dear Sir, I am looking for a job.Thanks for your email,

Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO

Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision

I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia

M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant

32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

I have extensive experience in plant start-ups, trouble-shooting, and process management as a supervisor, technician and operator. I am seeking an operations oriented position.

Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management

Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Dear sir, I would like to submit my application form for a suitable post of production engineer. Here is my CV below. If you want other document or information, please let me know.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association

Seasoned professional with extensive and diverse experience in the petroleum industry, looking for a challenging and rewarding operations supervisory position. Interested in either domestic employment or international rotational assignments. Will consider domestic relocation.

Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer

EXPERIENCE:Experienced in the design of the following systems: Fiscal Oil and Gas Metering,Offshore / Onshore,Fire & Gas/ESD,DCS, SCADA ,Telecommunication,Compressor Anti-Surge,Subsea Controls,Thruster Controls,Ballast Controls,Dynamic Positioning Systems,Hydroacoustics,Winch Controls.

oil exp. crude/ refinery all aspects field and office

Operator controlroom

Pipeline Engineers, Project Engineers, Project Managers

Application to vacancy Medic (Doctor)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out