Resume - 6+ years of experience in Reservoir Engineering and Oil Industry.

Misco Jobs

Resume #52230

CONTACT INFORMATION:
View contact information...

OBJECTIVE

Develop my professional career, development of Oil and Gas reservoirs, consolidating my technical knowledge by gaining new experiences, and contributing to maximize profits.

QUALIFICATIONS

BSc in Petroleum Engineering, Cairo University, Egypt (May2000).

KEY COMPETENCIES

* 6+ years of experience in Reservoir Engineering and Oil Industry.
* Reserve Assessment and Production Profile Forecast.
* Decline curve analysis and material balance calculation.
* Transient well test analysis.
* Experienced with sandstone and carbonate reservoirs
* Water flooding scheme management.
* Reservoir Modelling (ECLIPSE 100 & RMS)
* Field, Well Performance Review and Outcome focused.
* Special skills in technical softwares OFM, MBAL, SAPHIRE, RMS, ECLIPSE 100, PIPESIM and SUBPUMP in addition to common Microsoft windows application.
* Familiar with HSE common rules and instructions.
* Bilingual: English in addition to mother tong Arabic
* Excellent communication, presentations and report writing skills.

WORK HISTORY

1st October 2000- Present:
Suez Oil Company (SUCO), Egypt
Reservoir Engineer
Responsibilities include:
Reserve Assessment and Production Profile Forecast:
* Estimation of STOIIP volumetrically & material balance calculation, Calculating proved developed remaining reserves utilizing decline curve analysis.
* Preparing Short and long term production forecast and budget economics sheets.
* Preparing annual reserve reports, reservoir management review reports and annual routine reports.

Water Injection:
* Optimization of water injection volumes according to reservoir response (pressure and production data) (voidage replacement ratios calculations and material balance)
* Monitoring the effect of the injectors to the total field & regions productions and pressure performance and decide the remedial actions, if any.
Well Test Analysis:
* Preparing programs and Performing complete well test analysis for PBU, SFPT, SPT, falloff, step rate tests and decide the remedial action if required.
* Preparing/optimizing plan schedule programs for reservoir monitoring surveys.
Reservoir Modeling (ECLIPSE100 & RMS):
* Using ECLIPSE 100 black oil Simulator software (office, floviz & schedule module).
* Identify the necessary well-specific data gathering needs (e.g... perorations & isolation intervals, deviation surveys, actual related time events…) required to create dynamic simulation models.
* Complete management of creating projects on schedule module and data importing & exporting from/to ECLIPSE.
* Familiar with ECLIPSE 100 common keywords in addition to specifying required ones by manual searching.
* Preparing and checking required data for model initialization like PVT tables, capillary pressure, saturation function tables and equilibrium data.
* Performing history matching runs and estimating of errors included in.
* Locating infill production and injection wells to the model and perform prediction runs and evaluate same.
* Q.C on the newly created static models for determination validity or shortfall.
* Using ROXAR- RMS software for data preparation to ECLIPSE wells correlation, up scaling cross-sections and mapping.
Open and Cased Hole Logs:
* Using ELAN's for defining perforation intervals and its associated other reservoir parameters.
* Quick look and quantitative open hole log analysis.
* Complete PLT logs evaluation, interpretation and deciding related actions (isolation and/or re-perforation or stimulation).
* Evaluation of reservoir saturation according to MDT, TDT and CHFR logs and designing programs for same.
* Familiar with other common cased- hole logs GR, CCL, CBL, VDL…etc.
Field and Well Performance Review:
* Preparing routine field and wells review deciding required surveys and its related operations
* Preparing Rig schedules, wells drilling and workover proposals and projects economics sheets.
* Preparing Production allocation-verification factors and reconciled production figures.
* Attending meetings and dissuasion rooms.
Operation Responsibilities include:
Gas lift
* Gas lift wells troubles shooting and remedial actions.
* Gas lift wells completion running, testing and well unloading & optimization.
Cased hole logs
* PLT & PSP, MDT, RST, CHFR supervising jobs.
* USIT, CBL, VDL & Corrosion logs jobs supervision and evaluation.
* Using correlation logs GR & CCL as a main depth guide.

Down hole pressure surveys (PBU, SFPT and SPT)
* Job planning, considerations and supervision.
* Carrying out related calculation (e.g., nodal analysis and spread sheets).
Perforations
* Carrying out all perforation jobs, either rig or rig less.
* Familiar with the common types of guns (TCP, HSD, Enerjet …)
* Jobs arrangement and safety considerations.

Scale removal & inhibition
* Designing and supervising scale removal jobs (chemical and mechanical)
* Designing and supervising scaled formation treatment programs & inhibition jobs and after-jobs evaluations.
Well completion and workover witness engineer
* Completion tally running and testing.
* Stucked Tubing cutting and fishing.
* Setting bridge plugs, CMT plugs and packers.
* Fishing operations either rig or rigless.
* All coiled tubing's and pumping operations carrying out and arrangements.
Well performance
* Well performance monitoring, testing review & evaluation.
* Following up routine works which involves the following:-
* Daily & Monthly operation reports
* Well / field performance updates and monitoring.
* Wire line scheduling preparation.

[Refer to Appendix for a detailed history of technical tasks.]

APPENDICES
TECHNICAL TASKS

* Shared in in-house study for scale tendency in RAS- BUDRAN field and monitoring the effect of water injection optimization to scale build-up tendency and the remedial actions.

* Prepared complete project on OFM software for Ras- BUDRAN field (more than 100 completion) including all available data (production, injection, PLT, pressure, produced water salinity, PVT, core data, open hole logs,...) which is greatly helped in good, easy and right reservoir management decisions.

* Currently Sharing with team work in studying Ras- Budran full phase ESP. this is concerning converting 15 wells from gas lift to ESP after encountered lifting problems due development of water cut and shortage of gas.

* Shared in evaluation of un-completed shallower reservoir formation (Ras- Budran shallower horizon about100 MM STIOOP) and trying to test it via the current infrastructure for minimizing the cost and reducing the risk.

* Competed project for RAS- BUDRAN field on ECLIPSE 100 schedule module in 2003 after spending more than 3 months of data gathering and revision. It was used in the simulation model at that time improving the history matching and reducing the uncertainty degree.

* Currently, sharing in integrated reservoir study for Ras- Fanar field which is being carried out by ROXAR London.

* Performed complete evaluation for Ras- Budran third version simulation model (Ras Budran un-faulted model) and discussing findings with third party summarizing un-acceptance of the model.

COMPUTER SKILLS

* Experienced in Windows based PC software such as MS-WORD, MS-Excel, MS- Power Point in addition to technical software OFM, MBAL, SAPHIRE, RMS, ECLIPSE 100, PIPESIM, SUBPUMP in addition to most common windows applications.
* Complete management of projects data base initialization, creating linked variables, mapping, contouring, plotting … to OFM software.

MEMBERSHIPS

Society of Petroleum Engineers (SPE).
PAPERS

Quality control of PVT data for field development studies (with co-authors) presented in Mediterranean offshore conference MOC 2006 Alex.

TRAINING

TECHNICAL
* Advanced reservoir management course (Colorado mining school USA)
* Horizontal well technology for improved oil production (EREX, Cairo & Hurghada)
* Reservoir Characterization of sandstone reservoirs for modeling & simulation (EREX, Cairo & Hurghada).
* Gas-lift principals and trouble shooting (GESCO, Egypt).
* Production logging tools (EGYCAN, Egypt).
INDUSTRY REQUIRED
* Safe using of off-shore life saving appliances. (Arabic academy for science and technology).
GENERAL
* Microsoft outlook express and e-mail. (In-House).

PERSONAL BIO

Date & Place of Birth: January,1st, 1977, Al-Sharkia, Egypt
Citizenship: Egyptian.
Marital status: Married + 2 Children.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5801 to 5850 of 10813)

Go to Search Parameters...

Brief Description

Open Hole LWD Logging and log analysis, M.Tech (Applied Geology)

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Presently working with ConocoPhillips Syria Dez.Gas Ltd. since April 2002 as a Senior Warehouse & Procurement Supervisor in Syria (Middle East) on 28 Days ON/OFF schedules through GMOS (MSI). Job Profile: Responsible overall for all aspects of materials including warehousing, procurement operations

Working In the Oil and Gas Drilling Industry Since 1986 Looking for a company that wants its employers to look after it !!

Rotating Equipment Mechanical Engineer

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Education: Bachelor Degree in Economics

Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness calculation, pressure balance in PIPENET software, etc

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

10 years of experience as chemist with exposure to most modern methods of analysis

chemist, corrosion eng, oil and gas fields

To obtain a Technician, Operator, or Specialist Position.

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

Experienced Civil / Structural Engineer

Responsible for on and offshore site planing for well testing operations job logistics and personnel movements. Working in a wide range of environments and positions around the world. Responsible for the safety of the crew, the accurate reporting of operations and morning reports, preparing the corr

Over 20 years experience

Wireline Operator/Supervisor

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

25+ years experience

20+ years oilfield experience, excellent work ethic - personal skills - time management, own truck with commercial insurance and plates, current tickets

Inspection Coordinator / Welding Inspector

Technical skilled person for supervising piping /construction projects

A state Engineer in refining

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

I am a mig welder that is a harder worker that is willing t o learned new skills to become a better overall welder.

I have a degree in bachalor of engineering, in mechanical engineering discipline. i will be able to perform effectively if i am being taken

NDT Level II - UT / RT / MPT & LPT - Sr. NDT Tech.

Experienced Opito Level 3 offshore rigger with additional safety and working at height training.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

5 yrs extensive training and experience in PDS-EERaceway and Microstation, 8 yrs in Autocad

With 5 yrs experience, Chevron Indonesia, as a Petroleum/Reservoir Engineer. Activities include EOR optimization, reserves estimation, depletion plan, project management, reservoir surveillance, workovers, drilling programs, and artificial lift optimization.

M.S in petroleum geology and petroleum engineering. years working experience in reservoir characterization, formatioin evaluation in industry. knowledge in reservoir simulation, prduction and drilling engineering.

Power Station Chemist in the Philippines with experience in power plant desalination and ultrapure water treatment, corrosion issues, water/steam purity control, fuel gas and oil chemistry and engineering projects related to power plant chemistry.

engineer with excellent telecommunication knowledge

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

Chemical Engineer

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

Aircraft maintenance engineer with turbine experience. AC/DC, hydraulics, pneumatics troubleshooting and maintenance. Vibration diagnostics and diagnostic software.

Characterization of locations for production studies. Static models Generation. Seismic interpreter. Professional development toward the coordination of technical teams. Flexible to work under different technological platforms and interpretation (Geology, Geophysics and Petrophysics)

pipe fitter,6G certified gtaw& smaw welder ,field experience, saudi arabia Aramco project, Malaysia liquified natural gas under hyundai constraction, kellogs proponent , petron bataan refinery Philippines

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 [ 117 ] 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out