Resume - Senior Instrument , Electrical, Rotation, Engineer, Project Management

Misco Jobs

Resume #52466

CONTACT INFORMATION:
View contact information...

CV

Thomas Pilarek
Senior Instrument Engineer
Senior Electrical Engineer
Senior Engineer

Thomas is a Master of Science Electrical Engineer, instruments, measurements, control and power specialist. With 25 years experience as instrument and control engineer of which 16 years is in the oil and gas industry.
Has also background and experience in Project Management.

Specialist knowledge includes:

Measurement and control equipment for chemical industry.
Digital control system: visualisation, PLC, computer process control, Emerson Ovation, Yokogawa CS 3000, Advantech, Beckhoff),
Electrical equipment: ABB, Moeller, Siemens, Legrand
High and low voltage equipment: circuit breakers, protection etc.
Electrical apparatus for hazardous area according ATEX directive, American ISA and Russian ÃOCT Standards
Measurements instruments, wet and dry analysers, spectrograph, chromatography, flow, level density, viscosity, colour, turbidity etc.
Solar gas turbines: Mars, Centaur, Taurus, Titan.
Steam turbines MAN: MARC.
Gas compressors: Ariel, Sultzer,
Boreoscopy, alignment, gas turbines repairing, TComs, HMI, RTC.

Languages: English, Polish, Russian, Czech.

Education:
2006 University of Oxford - Effective Project Management for Engineers, Scientists and Staff in Hi-Tech Companies.
2006 Thames Valley University in Reading - Project Management according PMI standards.
2000-2002 International School of Banking and Finance in Katowice - Property management
1975-1981 High Engineering School in Opole - MSc Electrical Engineering, Power System Protection.

Personal date:
Surname: PILAREK
Name: Thomas, Vlodimir
Date of birth: July 8th 1956
Status: married, two dauthers 14 & 17.
Ethnicity: White - European

Experience with Foster Wheeler Energy Limited

2006 - Present BP De-Carbonisation Fuel Project,
Shell MEG Houdini Singapore Project
Senior Instrument Engineer, Process Master

Experience with Turbomach Caterpillar

2004 - 2005 Starachowice Gas Power Plant
Service Engineer
Power Plant, gas, steam turbine and gas compressors.

Other experience:
2003 Plock Refinery
Instruments and Control Supervisor
Olefin Pirolise Plant measurements and control instruments modification (Basel Plastics)
Plock Crude Oil Pipe Line Company in Poland
Contract Manager
Crude Oil Tanks, measurements instrument refurbishment.

2001-2002 Chemical Factory Zachem in Bydgoszcz
Instruments and Control Advisor
Chlorotoluene Plant refurbishment
Dimethylothereftalan Plant modification
Epichlorohydrine Plant modification

2000 Plock Refinery
Senior Instruments and Electrical Engineer
Crude Oil Distillation Plant Nol 4, Electrodehyrdator and heat exchangers measurements and control improvement.
Isomerisation Plant building.
Diesel Oil Desulphurisation Plant (ABB Lummus Global).

1998-2000 DWORY Chemical Factory in Oswiecim
Maintenance Manager, contract manager
Styrene Plant rebuilding (Raytheon)
Butadiene – Styrene Rubber Plant modification
Ethylobenzen Plant modification
Power Plant refurbishment

Jedlicze Refinery
Instruments and Electrical Specialist
Used Oil Hydrorafination Plant (Lurgi Bipronaft),

1996-1997 Ammonia Plant in Pulawy
Instruments & Control Advisor
Kaprolactam Plant, cyclohexanol process modification.
Melamine Plant, biuret reduction project.

Plock Refinery
Instruments Engineer
Furfural Rectification Plant, measurements and control equipment modification
Toluene Plant measurements & control equipment modification

Pliva Krakow,
Pharmaceutical Factory in Lublin,
Polfa Resovia
Terpol Sieradz
Instruments Specialis: Pharmaceutical plant modification

1995 Ammonia Plant in Kedzierzyn
Designer and Supervisor
Urea Glue Plant measurement equipment modification

1983-1995 Technical Expertise Office
Electrical Engineer, Technical Manager.
Technical Expertise for industry.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 10923)

Go to Search Parameters...

Brief Description

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Internationally experienced executive, multilingual, results oriented teambuilder

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

16 years of experience as a water treatment chemist in Power Plant.

17+ years, FEED, Engineering, Fabrication, Construction, Commissioning. Brownfield dev./Cap. Ex. Oil/Gas/Petrochemical/LNG/Mining

Drilling Fluids Engineer 38 years worldwide experience both in Field and Management

Extensive Cost Control experience gained over the last 25 years in the Oil Industry mainly in Drilling

Master Mariner

i attended petroleum institute nigeria after my school certificate i had ond in petroleum refining technology and higher diploma in chemical technology i worked in nnpc refineries in porthacourt warri and kaduna i can also work in petrocheical and gas processing plants

Civil Structural designer with over 20 years of experience in civil, structural, industrial, petrochemical onshore and offshore projects, infrastructure, and government projects.

Experience in foxboro and bailey DCS panel operation . i am working as panel operator in a big oilfield control room since 1993, i am the most suitable candidate for this post

Civil structural engineer, 14 years experience, familiarity with structural codes and finite elments software.

Well Services, Well Interventions, Completions

PhD in Geophysics, excellant in computer ,

Detail engineering as Performer/Area Lead; Material estimation, Proposal & Man hour estimation; Bid review, Vendor/Sub-contractor document review; Development of standards, spread sheets; Coordination with work share office/Client; Field engineering Support at site

A seasoned Security Manager with 20+ years of experience in Government service and Oil and Gas industry 15 of which was in Shell Nigeria. Strong field experience in Security Operations, kidnap & ransome mgt, risk surveys and assessment, cost control, loss prevention and incident investigation.

Goal-oriented QHSE manager with 18 years experience in organizational and project QHSE Management, In-house project Management and Audit Management including 10 years background of Piping and Pipeline Engineering in various industries under E, EP, EPCM or EPCC contracts.

Strong leadership and ability to work according by Company's Political and Procedures. Good understanding of Oil accounting Process. Supporting the branch Finance Manager on day-to-day compliance issues

I am a Chemistry graduate with 18 years of experience with NACE certificate as Corrosion Technologist

Over seventeen years of experience in the Oil & Gas Construction

18 years Project Construction Management/ Project Execution / Project Management Consultancy experience in the Industries like Refineries, Petrochemical and Oil Gas (Cross Country Pipelines, Booster Pump Stations, Gas, Oil Station, Up-Stream flow Lines) including Mechanical / Piping, Civil, Electric

Senior Piping Engineer - Stress Analysis / Material / Layout (18 years experience)

General Management (1300 staff), Sales devt, finance - International experience - Oil & gas, Distribution, civil eng.

Status Qualifications and employment history Education Foreign Languages

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Master mariner class 1 unltd, over 8 years command experince onboard large crude carriers. Over 40 spm mooring ops at various terminals including Lybia. Willing to gain expertise as mooring master in offshore oil industry.

I have high experience as production supervision at manufacture plants.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

post Engineer Senior Inspector – Painting / Coating & Insulation BGas / NACE –CSI [I] certified Painting Inspector. Experienced Thermal / Cryogenic Insulation Inspector Ref – Contract / Direct Hire- on Day rate basis with rotational cycle. Oil & Gas, LNG projects. Client side representati

SENIOR PANEL OPERATOR POSITION FOR PRODUCT TANK / JETTY AREA.

Sr. Electrical Designer with 15 yrs experiance including PDMS

15 year experience in international/ multicultural mid- and large scale oil & gas projects in polar areas of Russian Federation in both Contractor’s and Client’s role. Working to Russian and Western standards. Planning, risk management, cost control, certification for construction and commissioning.

My strengths lie im my ability to manage available resources and communicate with others

Expert in PDS Fameworks, Microstation, PDMS and bentley Structural Triforma

Civil/Structural engineer with 14 years experience in oil 7 gas industry

Well Test Engineer

Senior PDMS Piping Designer/Checker

With my dedicated experience as a Directional Drilling Supervisor for 14 years.I have worked in Western Canada, Mexico and Middle East.

Years of progressive and increasingly responsible executive assistant & office management

Electrical engineer with experience in oil and gas maintenance, installation, procurement, materials sales and marketing

Experience in 8 years in Mechanical seal industry, 7 years in Diesel engines and 1 year in fabrication industry

Thirty-five years of detail design / checking in the petrochemical / refinery and fertilizer engineering field. Piping work includes preparing detail design drawings, punch list during construction, material take offs, labor cost estimates, manpower estimated, developing P&ID drawings.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out