Resume - I am currently employed as Marine Technical Manager for ASCO Plc in Aberdeen.

Misco Jobs

Resume #5263

CONTACT INFORMATION:
View contact information...

Whilst willing to give full commitment on a "do anything anywhere" basis, ideally looking for an interesting and challenging shore based position with demanding and long–term prospects, where I can use my experience and qualification to their utmost. I am fully acquainted with QA and ISM auditing procedures.

SUMMARY OF QUALIFICATIONS
 STWC 95 Regulation 11/2 L.E.A. Limitations.
 GMDSS General Operator's Certificate
 ISM Internal Auditors Certificate
 Maritime Safety Behaviour Management Course
 Vessel Resource Management Course
 Navigation Control Course Inc A.R.P.A.
 Electronic Navigation Systems
 Safety Leadership Training

EDUCATION
 1958 – 1968 Kirkwall Grammar School
 1985 Stromness Nautical College
 1990 Stromness Nautical College
 1992 Stromness Nautical College

PROFESSIONAL EXPERIENCE
20.02.2003 – Present
ASCO Plc Aberdeen
Marine Technical Manager – Shell Operations Aberdeen
I am responsible for providing a high level of Technical support in all aspects of the operation on this specific contract. I ensure that the highest standards of quality assurance are in place by maintaining a vessel audit programme and other monitoring systems. Provide on-going advice, consultancy and technical support to project management teams, ensure that all equipment on all vessels is performing in accordance with set procedures, reviewing, developing and modifying these procedures on a continuous- improvement basis, recognizing that in all aspects of the operations, safety is paramount.
I am fully familiar with both QA and ISM auditing procedures, customer focused and with excellent communication skills, a strong team player with proven leadership experience.
1999 - 31.03.2003 Gulf Offshore N S Ltd
Master
I was Master on the UT755 Monarch Bay, which was operating in Malabo Equatorial Guinea for two years, on charter to Exxon Mobil; During this time and due to the remote location of operations I had immense personal satisfaction of looking after the company's interests both logistically and operationally in sometimes difficult conditions. On completion of the contract I sailed the vessel back to the UK to begin operations on the spot market in Aberdeen. I have also worked in the North Sea with Gulf on the pipe-carrying vessel Highland Champion supporting the pipe lay barge Seamac 1 and the Lorelay from bases in Denmark, Norway and UK. I was also Master of Mercury Bay another UT755 operating in the UK sector of the North Sea on various contracts.

1997 – 1999. Tidewater Marine Ltd
Master
I was employed by Tidewater on their anchor handling and platform supply vessels operating in the North Sea and West Africa. During my employment with Tidewater I had a three month secondment period in their Aberdeen office, which involved being part of the recruitment team which I thoroughly enjoyed gaining valuable experience in office management.

1996 De-Beers Marine/ Octo Marine
Navigating Officer/Master
I had a six-month contract with De-Beers in South Africa on their survey and diamond dredging vessels, which involved the laying of three and four point mooring systems. I also had a two month contract with Octo Marine in South Africa which also involved laying four point mooring systems as well as survey work in West African waters.

1994 – 1996 Clipper Marine Ltd
Master
This vessel was operating in the Warri/Escravos area of Nigeria, due to the vessels remote location there was a particular personal onus on myself as Company Representative to ensure that the Client / Company relationship was maintained to the highest possible standard and that the safety and operations of crew and vessel remained uncompromised even under difficult logistical conditions.

1987 – 1994 OIL Marine Ltd
2nd Mate / Mate / Master
During this period I was involved in all aspects of the Offshore industry in the North Sea, Gulf of Mexico, West Africa and South Africa. This includes working upon anchor handling tug supply vessels, platform support vessels, crewboats, seismic and stand by duties.
I am thoroughly familiar with most aspects of towing and anchor handling for semi-submersibles, jack-ups and barges under all types of conditions.
I have also served on ferries running between ports in the UK and on coasters plying between ports in Europe. Three-year tour of duty with the Royal Fleet Auxiliary as a Tactical Radio Operator and prior to this sailed "deep sea" on general cargo ships. I am fully conversant with legal and safety regulations in the marine industry.

ADDITIONAL PROFESSIONAL ACTIVITIES
Computer skills include Microsoft applications, Lotus 123, Quatro and various shipboard and office applications.

INTERESTS AND ACTIVITIES

Sporting events, driving, and club activities, improving qualifications.
Meeting people, good team worker and organizing

OTHER
D.O.B 25/06/53 St.Ola Orkney. Scotland
Further details and good references can be provided on request
Have neither criminal nor spent convictions and hold a clean British
Driving License
EEC/British Passport number 500149093 (expires 16/06/2005

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5401 to 5450 of 10917)

Go to Search Parameters...

Brief Description

My unique mix of previous work experience combined with my completion of the Associate of Applied Science Degree in Process Technology makes me an ideal candidate for employment with your company.

I'm 31 years old working as a condition monitoring engineer in Badr Petroleum Company joint venture with SHELL company where my nature of job is to manage and develope predective maintenance programme for rotating machinery through vibration analysis, lube oil analysis and thermography

I am a petroleum engineer from UT-Austin. I want to go offshore for my first full time job. I enjoy being in the field over the office. I will be up to any task that is required.

Key responsibility of Marketing and selling our Products like ATC, Auto Loader, Chillers & Coolers, Hypoid Motors, Telescopic Covers, Rotary Tables, Spindles for south India Region.

Working at SUI FIELD GAS COMPRESSOR STATION (SFGCS), having daily throughput of 600 MMSCFD

Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as Qatar Gas, other than working with petro power plant, oil/gas industry & Heavy metal industry

To work in a challenging and stimulating environment envisaging personal growth and career development by associating with an organization, which provides an ambience for learning and growth, where my problem solving talents and designing skills can be utilized.

Panel operator with over 10 years experience in gas receiving facilities, looking for overseas experience

Senior Drilling Engineer & Supervisor

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

WELDING INSPECTOR CERTIFIED WITH B.E MECHANICAL

Bachelor of science degree holder with skills in mineral exploration

2 yrs exp in piping engg and pdms ,mechanical engineer

.Bacholar Degree In Chemical Engineering. Two Year Experience As Drilling Fluid Engineer.

Mechanical, Fitter, Basic Welder and Electrical

8 years comprehensive experience as a Senior Condition Monitoring Technician in Oil & Gas / Petrochemical / Fertilizer Industries in Middle East, like RasGas LNG Company Limited Qatar, Kuwait Oil Company (K.O.C), Kuwait, Fertilizers and Chemicals Travancore LTD (FACT) Cochin, Petrochemicals etc.

Ship Design Engineer - Piping & Machinery

Independent Professional Landman with 8 years of experience in running title, lease acquistion, due diligence, curative, surface damages, ROW and easements , permits and environmental issues with Federal and State regulatory agencies, including Phase 1,2 and 3 ESA and remediation.

Eight years of experience in Oil and Gas industry and Stimulation positions with experience in drilling, tools, and cementing. Strengths include knowledge with all Frac fluid systems, frac equipment, stimulation techniques, coordinating, and teamwork.

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

Project Manager

Experienced sandblaster/painter/foreman/safety tech

Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)

Control room operator-process operator-gas-lift operator-gas dehydration-..

Total Experience 14 Years – [Gulf 10 Years & India 4 Years]

November 1998 - Present at Reliance Industries Limited [Refinery Complex]

I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa

Fire Marshall or fire Captain

Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.

Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.

I believed to be a dynamic responsible and autonomous person. I am very polyvalent. I present a high degree of adaptation to accomplish new tasks. I worked on team my entire research and teaching career. I communicate easily with different culture using different languages.

I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.

Reservoir development, geologic modeling Landmark

I am currently employed as Marine Technical Manager for ASCO Plc in Aberdeen.

14 years with Texaco. ChevronTexaco. Sales & marketing professional. concentrating on downstream, fuels, retail lubricants. Educated to MBA

More than 11 years business consultancy, project management, professional engineering and supervisory experience primarily within the oil and gas industry

Experienced about fourteen years in Refineries,Gas,Petrochemical and industrial units including teaching.

UNIX / LINUX / AIX Systems Administrator

A position with strong emphasis on Industrial Automation & Control with direct exposure to System Design, Configuration and Implementation. Support responsibilities utilizing strengths in the areas of project management and system architecture.

I am looking to be a part of a succesfull drilling team.

Oil and Gas Professional with expertise in Operations and Finance developed over a seventeen year period in foreign countries

I am a well seasoned naval architect experienced in SPAR, FPSO, TLP, and Semi-submersible design and analysis.

Highly competent, experienced HSE professional seeks overseas project

Process operator/technician. Had experience and knowledge in process operation, both in petrochemical and oleochemical industries

calibration, Mentinence, Installation, And wired the all kinds of control panels.Undestand all kinds of drawing.

Project Manager-Oil & Gas: 8+yrs. experience in Fortune 500 Oil & Gas Company

5 yrs of exp in research and instrumental analysis

I have been working in the oil field since 1999. I have worked on onshore fields in the south of Algeria for SONATRACH company and her drilling and cementing department as drilling supervisor.

I have done my graduation from UET Lahore (Pakistan) with majors in PETROLEUM & GAS Engineering recently. I am a skilful person, committed to my work and determined to develop my technical capabilities and knowledge in order to become an integral part of your company.

I have the drive and the dedication that will bring a positive force to my position. My experience as an acid/cement operator has given me a vast knowledge of variety of different field operations. The knowledge I gained from SAIT has allowed me too bridge the gap between the office and the field.

First Prev 101 102 103 104 105 106 107 108 [ 109 ] 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out