Resume - 10 years experience in EPC company. Good interpersonal and communication skills,...

Misco Jobs

Resume #52768

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A position in Senior Process Engineer where I can demonstrate my technical and organizational skills and contribute to the company

EDUCATION
1997 University of Indonesia
Bachelor of Science Degree (ST) in Gas & Petrochemical Engineering

WORK EXPERIENCE
PT. INTI KARYA PERSADA TEHNIK (May 1997 - Present) as Process Engineer

HIGHLIGHTS OF DELIVERED PROJECTS:

1. FEASIBILITY STUDY OF EXCESS FUEL GAS & BOIL OFF GAS COMPRESSOR
January 2007 - Present
Feasibility study of fuel gas system modification in LNG Plant

Client: PT. Badak NGL Co.
Plant location: Bontang, East Kalimantan, Indonesia
Role: Lead Process Engineer

Responsibilities:
- Managed all process engineering activities
- Responsible for all process engineering deliverable documents, such as P&ID, PFD and Heat & Material Balance, Process Data Sheets, Philosophy Documents, Lists (i.e. equipment list, line list) and Study Reports
- Performing process simulation for all operation options
- Study & provide the recommendation in final report

2. UJUNG PANGKAH DEVELOPMENT PROJECT (EPC)
December 2004 - Present
144 MMSCFD Gas Processing & 5000 BPD Condensate Stabilization Plant

Client: Amerada-Hess
Plant location: Gresik, East Java, Indonesia
Role: Lead Process Engineer

Responsibilities:
- Managed all process engineering activities
- Responsible for all process engineering deliverable documents, such as P&ID, PFD and Heat & Material Balance, Material Selection Diagram (MSD), Process Data Sheets, Philosophy Documents, Lists (i.e. equipment list, line list), Study Reports and requisitions (i.e. PSV, Hot Oil, Amine Solvent)
- Coordinating of P&ID development
- Designing tray column
- Performing Plant Operating & Control Philosophy and Emergency & Depressuring Philosophy
- Reviewing Operating Manual
- Member of HAZOP meeting
- Supporting construction and pre-commissioning activities
- Technical reviewing for several packages, i.e. Thermal Oxidizer, Fired Heater, Acid Gas Disposal System, H2S Removal System (Amine System), Effluent Treatment Plant, Hydrocyclone and chemical injections (anti foam, pH control)

3. HAZARD & OPERABILITY STUDY for TRAIN A & B BONTANG LNG (Engineering Services)
September – October 2004
HAZOP of LNG Plant

Client: PT. Badak NGL Co. / Pertamina
Plant location: Bontang, East Kalimantan, Indonesia
Role: Process Engineer

Responsibilities:
- Member of HAZOP meeting
- Identifying and investigating of potential hazards and operability problems during plant operation and normal start-up and shutdown
- Process design assessment related with problem finding and solutions

4. GREAT MABRUK DEVELOPMENT PROJECT (Proposal)
May – August 2004
27,000 bpod Oil Treatment Plant

Client: Compagnie des Petroles Total Libye (CPTL)
Plant location: Sirte Basin, Libya
Role: Process Coordinator

Responsibilities:
- Reviewing all process engineering subjects in tender document
- Process design verification by using Hysys
- Coordinating P&ID Development (for proposal purpose)
- Reviewing and verify all equipment design
- PFD and Heat & Material Balance verification (for proposal purpose)

5. INSTALLATION OF ADDITIONAL GAS TURBINE (Engineering Services)
(April – May 2004)
Fuel Gas Modification Plant

Client: Kondur Petroleum S.A. (KPSA)
Plant location: Malacca Strait, Sumatera, Indonesia
Role: Project Coordinator

Responsibilities:
- Managed all engineering service activities
- Coordinating P&ID modification
- Process simulation for plant modification assessment
- Performing study report for plant modification. The report contains recommendation to the Client

6. BETARA COMPLEX DEVELOPMENT (BCD) PROJECT (EPC)
August 2001 – April 2004
100 MMSCFD Gas Processing & NGL Recovery Plant

Client: Petrochina
Plant location: Jambi, Sumatera, Indonesia
Role: Process Engineer / Supervisor

Responsibilities:
- Preparing the technical proposal at bidding stage and reviewing ITB document up to contract award (August 2001 – August 2002)
- Process simulation development
- Value engineering at beginning of the project (placed on Chiyoda corp. office, Yokohama, Japan)
- Designing propane refrigeration system
- Designing heating medium (hot oil) network
- Designing JT-Valve operation mode
- PFD and Heat & Material Balance development
- Sizing and preparing data sheet for all compressors and turbo expander
- Sizing and preparing data sheet for all chillers and plate and frame heat exchanger
- Sizing and preparing data sheet of several storage tanks, drums and separators
- Preparing requisition of heating medium, Pressure Safety Valve (PSV), and Breather Valve
- Technical evaluation of several packages (UOP Membrane Unit, Flare and Thermal Oxidizer)
- Supervision of control valve and pump calculation
- Writing plant operating manual (placed on Chiyoda corp. office, Yokohama, Japan)

7. CENTRAL GATHERING STATION-10 (CGS-10) PROJECT (EPC)
May 1999 – August 2001
Crude Oil Processing Plant

Client: Caltex Pacific Indonesia
Plant location: Riau, Sumatera, Indonesia
Role: Process Engineer / Field Engineer

Responsibilities:
- Sizing of all pumps (centrifugal and positive displacement), Pressure Safety Valves (PSV), Breather Valves, Rupture Disks, Restriction Orifices and control valves
- Preparing Line List and Equipment List
- Performing hydraulic analysis and line sizing
- Checking and reviewing several engineering documents, i.e. general arrangement drawing, isometric drawing and static engineering drawing
- Field Engineering assignment. The major assignment was assist Field Engineering/Construction Manager regarding site modification, coordination of punch list execution, closing of NCR (Non-Conformance Report) joint inspection of Maintainability-Operability-Accessibility (MOA) with client and coordination of as built P&ID.

8. NGL-4 FRACTIONATION & PRODUCT TREATING PLANT (Proposal)
January – March 1999
5100 TPD Gas Processing Plant

Client: Qatar General Petroleum Corporation
Plant location: Mesaieed, Qatar
Role: Process Engineer (all engineering activities were placed on Chiyoda Corp. Office, Yokohama, Japan)

Responsibilities:
- Sizing and preparing equipment load sheet for drums, separators, pumps & compressors
- Preparing Material Selection Diagram (MSD)
- Consistency check for all equipment based on engineering documents

9. KAWASAKI DEVELOPMENT PROJECT (Proposal)
September – December 1998
Gas Processing Plant

Client: General Sekiyu K.K.
Plant location: Kawasaki, Japan
Role: Process Engineer (all engineering activities were placed on Chiyoda Corp. Office, Yokohama, Japan)

Responsibilities:
- Sizing and preparing equipment load sheet for drums, reactors, separators, pumps & compressors
- Preparing Material Selection Diagram (MSD)
- Consistency check for all equipment based on engineering documents

10. Train-H EXPANSION PROJECT (EPC)
July – September 1998
LNG Plant

Client: PT. Badak NGL Co. / Pertamina
Plant location: Bontang, East Kalimantan, Indonesia
Role: Process Engineer

Responsibilities:
- Detail engineering performing in area of Nitrogen Unit, Gas Turbine Generator & Steam Turbine Generator
- P&ID development for the responsible area
- Line sizing and preparing line list for the responsible area
- Checking isometric drawing of all piping within the responsible area

11. TRAIN-A~F UPGRADING (TAFU) PROJECT (EPC)
May – July 1998
LNG Plant (Modification)

Client: PT. Badak NGL Co. / Pertamina
Plant location: Bontang, East Kalimantan, Indonesia
Role: Process Engineer

Responsibilities:
- Reviewing process impact regarding replacement of amine based material from Ucarsol (UOP) to aMDEA (BASF)
- P&ID development for the responsible area
- Staff of HAZOP meeting (as a scribe)

12. FUEL STORAGE SATELLITE "B" PROJECT (Proposal)
March – May 1998
Gasoline Storage Facilities

Client: Pertamina
Plant location: East Jakarta, Indonesia
Role: Process Engineer

Responsibilities:
- Engineering review of tender document
- Storage tank sizing verification
- PFD review & verification

12. SULFURIC ACID & WASTE WATER TREATMENT PROJECT (EPC)
May – October 1997

Client: PT. Smelting
Plant location: Gresik, East Java, Indonesia
Role: Process Engineer

Responsibilities:
- Preparing line list
- Hydraulic check for all system
- Checking all engineering data in P&ID
- Preparing piping test document
- Sizing insulation for all equipment

Additional professional activities
- Guest Lecturer in Chemical Engineering Dept., University of Indonesia (2006)
- Trainer for new process engineer

TRAINING
- On the Job Training in BP Indonesia (formerly ARCO Indonesia), Offshore North-West Java Sea (ONWJ), Indonesia (1995)
- On the Job Training in Bontang LNG Plant, Bontang, East Kalimantan, Indonesia (1996)
- Hysys Steady State Simulation, Hyprotech, Jakarta, Indonesia (1998)
- On the Job Training in Chiyoda Corp., Yokohama, Japan (1998 – 1999)
- Operation Training in Pertamina UP VI Refinery Plant, Balongan, Central of Java, Indonesia (2002)
- Hysys Dynamic Simulation, ASPEN, Kuala Lumpur, Malaysia (2004)* Material Selection Design & Corrosion Assessment, University of Indonesia, Jakarta, Indonesia (2005)

PROFESSIONAL MEMBERSHIP
Indonesian Engineering Association (PII)

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6651 to 6700 of 9772)

Go to Search Parameters...

Brief Description

PP with 9 years industry experience in Niger Delta, GOM and North Sea provinces. Both studies and operations oriented in core PP skills ranging from quick look/detailed and field reviews. Input to well proposals, workovers and FDP’s. Worked with Shell, Halliburton, BP and Baker Hughes

Electrical Instrumentation Engineer - PLC/ SCADA Specialist

PETROLEUM LANDMAN

Maintanance, fault finding, instrument mechanician

Hard working, motivated individual seeking an entry level opportunity in the oilfield industry

Junior engineer

Experienced Mechanic, Have a wide range of experince from small engine to large diesel.I have a comercial drivers license and current DOT physical. Licensed Classes ABCD. Endorsements Hazmat, tanker, doubles and triples. I am also an experienced driver.

Structural Designer / Draftsman

I am looking for an EFL instructor position in the oil/gas industry.

I have done my mechanical engineering and have been working with Schlumberger in the Artificial Lift Division ever since. My specialization being failure analysis and Sizing of the ESps.

Am eager to work & learn in any environment with 100% flexibility of location of job. Am very optimistic that the exp gained so far would allow me to make productive contribution to your company. Given an opportunity for discussion I am sure I shall be on par with your expectations & requirement

Rig Electrician with over 10 years of service in the oil Industry.

An extremely hardworking and intelligent individual who enjoys challenged, both physical and intellectual. Willing to learn new skills at any given opportunity. Good team player valuing the importance of other team members and recognizing the importance of my own contribution

Mechanical Engineer with 4 years of hardcore experience.

I¡¦ve been employed in the drilling industry for 10 years. I have a good working knowledge of all areas of the rig floor up to Assistant Driller. I have current certificates in Well Control and first aid. I am looking to further my career and my ultimate goal is to become a driller.

B.S. Mechanical Engineering Louisiana Tech University March 1,2003 Passed the FE exam

willing to travel, would find it a bonus to any contract or in house petroleum land man position.

Seeking full time employment with an oil company who needs a Loader Operator.

Strong Process Engineering background with experience in Oil and Gas industry.

- degree in Chemical Engineering from University Of Tulsa, Oklahoma - specialized in corrosion engineering and plant design - have more than four years experience in chemical cleaning processes - well versed with HYSIM and HYSIS

I recently completed my MS in chemical Engineering from Arizona State University. I have a one year experience in an Oil Refinery plant during which I was stationed at the hydrobon/platforming unit of the operations department.

Human Resource Manager, My outgoing personality, my leadership and management experience, and my recently completed education make me a strong candidate for an entry-level position.

Safety Engineering professional with Oil and Gas Exploration and Production background, seeking a position as HSE Engineer in Offshore O&G Industry.

Seeking challenging position requiring excellent engineering and Technological skills in both office and field environments. The position should include a variety of tasks, including researches and the use of computers.

B.Sc. Honour in Mechanical Engineering (Second Class Div I)

Gas Turbine Maintenance Engineer

I need a good job in any of the oil or the gas companies and any sector!

10 years - administration.

OBJECTIVE Seeking a professional position in the Mechanical Engineering (QA/QC) industry, where I can effectively utilize my technical skills and experience.

L3 Absailer, various rigging projects, painting, blasting, manageral position

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

I speak English , Spanish and Russian language.

Seeking a position as a Floor hand where my experience, training and good work habits will be an asset to your company.

Morethan 11 years experienced HSE Professional. Holder of NEBOSH international General certificate and Diploma in mechanical and Industrial Safety. Worked with Oil and Gas, Civil and marine Projects.

I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich

Well testing technician

Marine Engineer - (BSc.) in Mechanical Engineering with Specialisation in Marine Technology & Naval Architect

10 years experience in EPC company. Good interpersonal and communication skills, experienced as a Lead Process Engineer, HAZOP member and Field Engineer, advanced ability in value engineering, P&ID, PFD, process simulation, feasibility/conseptual study and other detail engineering

21 Years Petro/Chem construction industry, including four years in a fabrication facility, together with offshore maintenance and post hook-up projects. Working as a Certification Engineer for many years prior to my current post. I am currently almost eight years in Qatar with Qatar Petroleum

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

I have 14 years of experience in Human Resources Management, Business Planning, Sales, and Customer Service in leading organizations in Egypt and abroad.

Working in the oil&gas industry since last 15 years(11y ears in abroad) working as a Sr. Commissioning operator.

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Geologist

A chemical engineer with 30+ years successful track record in oil & gas, EPC and chemical industries in India and abroad seeking contract jobs or assignments

In my 23+ years working in the geothermal fields in the Philippines, I have developed skills engineering, management, administration, safety and other disciplines. I feel that I am qualified for any geothermal job.

Strong background including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, safety, quality assurance, report preparation, and client relations.

Strong background in many areas including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, meetings coordination, quality assurance, report preparation, and client relations.

Two years pipeline experience, a pipeline engineer with course done fron indian institute of technology bombay.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 [ 134 ] 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out