Resume - PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Enginee...

Misco Jobs

Resume #5277

CONTACT INFORMATION:
View contact information...

OBJECTIVE Generally, to work as a Mechanical Engineer; ultimately to pursue my passion in the field of Metallurgics/Materials, Surface
Technology and specifically in Thermal Spraying.

EDUCATIONAL STATUS Doctorate in Mechanical Engineering
University of Dortmund, Germany

WORK EXPERIENCE

Permanent Employee: Head Research & Devolopment,GTV-mbH,Germany 2002 – current

-responsible for various incoming projects from initial query, organizing and coordinating technical employees, to timely completion
-as head of a process team, employ techniques such as microscopic, x-ray, x-ray diffraction, spectroscopic studies to investigate and conduct experiments on commercial projects for the purpose of improving and developing custom applications and methods in the field of thermal spraying techniques
-conducting various research activities and projects - eg. – Development of a new plasma spraying gun for increased powder deposit efficiencies

Scientific Employee: Department of Surface Technology,
University of Dortmund, Germany 1996 – 2002

-as primary contact for private industry, responsible for various incoming projects from initial query, organized and coordinated technical employees and collegiate assistants, to timely completion – approximate contract range: $100,000–180,000/yr
-as part of a process team, employed techniques such as microscopic, x-ray, x-ray diffraction, spectroscopic studies to investigate and conduct experiments on commercial projects for the purpose of improving and developing new applications and methods - eg. – conducting a failure investigation for a textile company
-between 1996 and 2001, acquired seven Research & Development Projects with a value of approximately $1.4 million in research grants; also resulting in twentyone publications to my name
-mentored collegiate assistants as well as outlined their final research projects and graded them
-previously tasked with preparing offers, proposals for damage investigations and research applications, liaising with clients, incorporating recommendations into reports, acquisition of surveys and proper fulfillment of coating orders
-conducted numerous research activities and compound projects, one being on the
Development of Zirconia-based Thermal Barrier Coatings by High Velocity
Oxygen Fuel Spraying (HVOF) Techniques
-involved in the initial research project and subsequent presentation of a paper on the Development and Manufacture of Ceramic Run-In Coatings for
Twin Screw Compressor Machines at the International Thermal Spray
Conference, Montreal, 2000
-presented research results at the United Thermal Spray Conference in
Indianapolis, USA, 1997
-represented my professor on the Committee for Standards, DIN AA14/AGV7, and the Research Consortium for Welding and Cutting
-taught and graded student research projects and labs for prospective technical college engineers (equivalent to Bachelor of Science) and mechanical engineering students

Collegiate Assistant Department of Surface Technology,
University of Dortmund, Germany 1995 – 1996

-performed experiments on thermal spray devices (HP/HVOF, HVOF, APS)
-maintained and repaired thermal spray devices
-performed metallographical and ceramographical preparations
-performed, under the direction of an engineer, lightmicroscopical and electronmicroscopical investigations of thermally sprayed coatings
-performed material analyses using an Interactive Image Analyser (IBAS)
-determined hardness, bond strength and wear resistance of thermally sprayed coatings
-generated computerized graphics

Collegiate Assistant Department of Packaging and Trade Logistics,
University of Dortmund, Germany 1991 – 1995

-under the direction of a graduate engineer, independently prepared professional training measures and created presentation documents relating to materials selection and testing
-while co-working on various industrial projects, developed and conducted damage simulations – eg. electrical appliances
-evaluated environmental impact and performance of packaging materials

EDUCATION

1996 – 2002 University of Dortmund, Germany
Institute of Materials/Metallurgical Technology

Emphasis on Surface Technology, Especially Thermal Spraying
Scientific Employee,
Current Degree: "Doktor-Ingenieur"

Doctoral Thesis: Contribution to the Development of Thermally
Sprayed Wear Resistant Coatings for Lightmetal
Surfaces

Grade: A (sehr gut)

1986 – 1996 University of Dortmund, Germany

Study of Mechanical Engineering,
Emphasis on Materials/Metallurgical Technology
University Degree: "Diplom-Ingenieur" (MSc)
Diploma Thesis: Development of Wear Resistant, Hardparticle
Reinforced, Zirconia based Thermal Barrier
Coatings by High Velocity Oxygene Fuel Spraying
(HVOF)

Grade: A (sehr gut)

1985 – 1986 Military Service

1981 – 1985 J. G. Fichte High School in Hagen / Germany
Degree: High School Graduation

1975 – 1981 St. Jacobus Secondary School in Breckerfeld / Germany

1971 – 1975 Grade School in Hagen, Rummenohl / Germany

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 10910)

Go to Search Parameters...

Brief Description

Petroleum Engineer

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

Highly experienced and successful management professional with a demonstrable record of accomplishment; currently seeking a challenging role, within a multi national environment. Offer a range of transferable skills within the areas of strategic management, business process re-engineering, etc

Foreign Exploration Country Manager, Oil Exploraton

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Total 18yr of experience in Piping FEED, Design and Detailed Engineering, Having good expousure of 3D engineering software.

Seismic data processing /reservoir simulation software developer

19 years Experience in Instrument during construction, commissioning, start-up and Maintenance in many different Oil & Gas, Refinery and Petrochemical Projects

PDMS Administration

Civil/steel structure supervisor

Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, Wells Superintendent

Project Management

Control Systems Specialist

17 years of post qualification experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes

Instrument supervisor / foreman

Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Deep Horizontals

Thirty years experience as a drilling supervisor for an major international operating company. I have an Associate degree in Petrouleum Technology. I am currently consulting in Oman on a land exploration well. I have over 20 years international experience.

Certified Production & Inventory Management professional

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Expert in managing conglomerates and applying strategic planning and control instruments

Instrument / Controlsystems Engineer

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

20 years fire fighting experience.Now working in ADNOC Off Shore facility

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

Over 14 years E & P and Service Industry technical experience with proven records of project deliverables. strong technical background as a Geoscientist, i.e.; Production and Development Geology, 3D reservoir modelling, Integrated Field Development study & Field Reviews.

More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out