Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #53126 next resume »»
CONTACT INFORMATION:
View contact information...

List of present & previous Company

Jun 2006 to present: Carigali Hess Operating company Sdn. Bhd.
Nov 2004 to May 2006: OGP Technical Services Sdn. Bhd.
Nov 2003 to Nov 2004: Arashins Services (J) Sdn. Bhd.
August 2003 to Oct 2003: K & K Sepadu Sdn. Bhd.
July 2002 to July 2003: Arashins Services (J) Sdn. Bhd.
Feb 2002 to May 2002: Yongchan Jaya Engineering Sdn Bhd
April 2001 to Jan 2002: Alstom Export Sdn. Bhd.
Sept 2000 to Feb 2001: Amerstrand Engineering Sdn. Bhd.
Sept 1999 to May 2000: Malaysia Shipyard and Engineering Sdn. Bhd.
March 1999 to July 1999: Penang Shipbuilding and Construction.
June 1998 to Feb 1999: Gunawan Iron and Steel Sdn. Bhd.
June 1996 to May 1998: Time Salam Lavalin Construction J.V.,SNC & GTMI J.V.
Dec 1994 to May 1996: Teknispek Sdn. Bhd.
Nov 1993 to Nov 1994: Sime Sembawang Engineering Sdn. Bhd.
July 1992 to Nov 1993: Malaysia Shipyard and Engineering Sdn. Bhd.

COURSE ATTENDED
July 2006: Incident Investigation course
Conduct by Risk Global Technologies Sdn. Bhd.
Kuala Lumpur.
June 2006: Basic Offshore safety,Sea survivaland helicopter underwater
Escape training, basic fire fighting, first aid CPR/EAR.
Offshore safety Sdn.Bhd. Kuala Lumpur.
May 2001: Construction Industry Development Board Malaysia (CIDB)
Supervisor for Mechanical Works
August 2000: Welding Inspector – CSWIP ( RTO / QA7 )
Ruane & T.P O'neill. TATI Terengganu.
Sept 1994: Magnetic Partical Inspection Course
Organised by Mr. Saharuddin Kambari
NDT Level III from NDE Consultancy Services
June 1994: Total Quality Management (TQM)
Conducted By Mr. Azaddin Aziz
QA/QC Manager
Sime Sembawang Engineering Sdn. Bhd.
Pasir Gudang Johor.
Nov 1993: In House Training – ASNT Level II
MPI and DPI
Sime Sembawang Engineering Sdn. Bhd.

WORKING EXPERIENCE ( 1 )

Turn Around / Shut Down Jobs

Nov to Dec 2002: Corro-shield (M) Sdn Bhd. Miri Sarawak
Position: Inspector
Location: Petronas Methanol (Labuan) Sdn. Bhd.
WP Labuan. Sabah.

Jun 2002: Arashins Services (J) Sdn Bhd
Position: Inspector
Location: 1) Kaneka (M) Sdn Bhd, Gebeng, Kuantan
2) Petronas CUF (M) Sdn Bhd, Kertih, Terengganu

May 2002: S.E.M Inspection Sdn Bhd, Shah Alam, Selangor
Position: Inspector
Location: PSR-1 Turn Around May 2002
Petronas Penapisan Melaka Sdn Bhd
Sungai Udang, Melaka

July 2000: Pakaruji Sdn Bhd.
Position: Inspector
Location: FPG Oleo chemical Sdn Bhd, Kuantan, Pahang

WORKING EXPERIENCE ( 2 )

Jun 2006 to present: Carigali Hess Operating Company Sdn. Bhd.
Position: Structural Welding Inspector
Project: Brown field Construction (Fast Track Project)
Cakerawala Gas field Development Phase 2
KHL yard. Lumut Perak.

Scope of Work: Monitor All welding NDT activities as per contract requirement (structure and Piping).
Review NDT result and witness Welder Qualification
Test (WQT) to qualify welder.
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.
Report to the Client Site Representative (CSR) for area assignment.
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

Nov 2004 to May 2006: OGP Technical Services Sdn. Bhd.
( A Member of PETRONAS Group of Companies)
Client: Petrodar Operating Company (PDOC)
Republic of Sudan,
Position: Welding Technical Inspector
(Project management Consultant)
Project: Central Processing Facilities (CPF)
Al-Jabalayn site
MELUT Basin Oil Development Project
Block 3&7 (Upstream)
Republic of Sudan,

Scope of Work: Monitor all welding and NDT activities as per contract requirement (piping, tanks. Pipeline, mechanical and pile caps)
Review NDT result and witness Welder Qualification Test
(WQT)to qualify welder.
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.
Report to the site manager for area assignment

Dec 2003 to Nov 2004: Arashins Services (J) Sdn. Bhd.
Taman Rinting, Masai, Johor Darul Ta'zim
Client: Sime Sembcorp Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: Structural Welding Inspector
Project: Talisman Energy
East Bunga Raya BR-E CO2 PLATFORM.
: West Africa Field Development FPSO Project
MODEC International LLC. Singapore.
(Fast Track Project)

Scope of Work: Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications
Request NDT on Complete joint as per contract requirement
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

August 2003 to November 2003: K & K Sepadu Sdn. Bhd.
Petaling Jaya, Selangor.
Client: Gas Malaysia Sdn. Bhd.(GMSB)
Position: Pipeline QC Supervisor
Project: EPCC of NGDS to Super Food Technology (6 inch-1.75km)
Mukim Plentong, Masai, Johor Darul Ta'zim.

Scope of work: Witness and monitoring welding activities,
Fit-up and visual inspection of each weld,
Witness and monitoring holiday testing and wrapping around the joint,
Request and monitoring Radiography activities,
Preparation Pre lowering acceptance report and lower in report, approval for backfill.
To monitor weld summary Record and compile for the final documentations.

July 2002 to July 2003: Arashins Services (J) Sdn. Bhd.
Taman Rinting, Masai, Johor Darul Ta'zim.
Client: Sime Sembcorp Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: Structural Welding Inspector
Project: Petronas Carigali Sdn. Bhd.
Angsi C & E Topside and Jacket
(Fast track Project)
Sarawak Shell Berhad
B11DR-A Jacket

Scope of Work: Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications
Request NDT on Complete joint as per contract requirement.
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

Feb 2002 to May 2002: Yongchan Jaya Engineering Sdn Bhd
Johor Bahru, Johor
Position: QA/QC Supervisor – (Structural, Piping, painting)
Project: Gadong Power Station
Brunei Darussalam
Client: Shinwa Corporation Pte. Ltd. Japan
Scope of work: Arrange sub-ordinate to do the job as per client's requirement.
Inspection of all fit-up and visual during fabrication and installation as per ITP.
Perform dimensional check of structure
Perform Welder Qualification Test (WQT) to qualify welder.
Review NDT report before submit to client for review.
Monitor and inspect on painting work after fabrication.
To monitor weld summary record and compile for the final documentation.

April 2001 to Jan 2002: Alstom Power Sdn. Bhd.
Petaling Jaya, Selangor
Position: Piping Inspector
Project: 3 x 700 MW Combined Cycle Coal Fired Boiler
Manjung Power Station, Perak.

Scope of work: Inspection of all fit-up and visual during pre- fabrication and installation.
Perform Welder Qualification Test (WQT) to qualify welder.
Review NDT report before submit to client for endorsement.
Perform line check together with client and sub-
Contractor for any rectification.
To monitor coating work for underground pipe line(fresh water)
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation

Sept 2000 to Feb 2001: Amerstrand Engineering Sdn. Bhd.
c/o SIME Sembcorp Engineering
Pasir Gudang, Johor
Position: Qa / Qc Coordinator – Piping
Project: Petronas Carigali Sdn. Bhd.
Angsi- A Topside

Scope of work: Arrange subordinate to do the job as per client request.
Inspection of all fit-up and visual during pre-
fabrication and installation.
Perform line check together with client and sub-
Contractor for any rectification.
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation

Sept 1999 to May 2000: Malaysia Shipyard and Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: QC Inspector – Structural & GRE Piping
Project: Petronas Carigali Sdn. Bhd.
ANDR-A Topside and Jacket.

Scope of work: Inspection of all fit-up and visual during pre-
fabrication and installations
Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications Perform line check together with client and sub-
contractor for any rectification.
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation.

March 1999 to July 1999: Penang Shipbuilding and Construction Sdn.Bhd
Kemaman Supply Base (KSB) Kemaman,Terenganu.
Position: QC Inspector – Piping & Structural
Project: Esso Production Malaysia Inc (EPMI)
GUD-12 Angsi Host Tie-in and Tabu-11 Gas Injection

Scope of work: Conduct welder qualification test, prepare welder certificate, carry out material inspection, material verification, fit-up inspection, visual inspection, request NDT, interpret RT result, prepare hydro test report, prepare welding summary and prepare manufacturing data report.

June 1998 to Feb 1999: Gunawan Iron & Steel Sdn Bhd
Phase 2 Project
Kemaman, Terenganu
Position: Welding QA/ QC Inspector (Piping & Mechanical)
Power Station Department

Scope of Work: Carry out inspection of structure, piping including underground pipeline (coating work) and pressure vessel such as material inspection, fit-up inspection, roundness inspection, straightness inspection,
Witness hydro test, NDT final inspection and prepare manufacturing data report.
Supervise all welding and NDT activities as per contract requirement.
Review NDT result and recommend acceptance/ rejection of contract work.
Report to the respective area Construction manager for area assignment.
Material receiving, inspection of material equipment and approved equipment for installation on site.
Inspected and verified positioning of equipment prior to anchor bolt grouted.
Inspected and verified verticality, horizontality &
levelling of static and rotating equipment.
Inspected and verified preliminary alignment, pipe stress and final alignment of rotation equipment.
Welding inspection for fabrication of shell and water box condenser (Fit-up, visual and witnessed N.D.T
Inspection).
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the installation specification and procedure.

June 1996 to May 1998: Time Salam Lavalin Construction J.V.
Taman Megah, Petaling Jaya
Project: PUTRA-KLRT System 2 (for Kuala Lumpur)

Position: QC Inspector (Track Work, Civil & Welding)
Scope of work: 1) Checking concrete work as per Stated below:
- Slump Test
- Pressure Test
- Dial Gauge Test
- Sieve Analysis & Moisture Analysis
- Checking & Supervising casting Concrete Operation
- Checking as built thickness of panel according to drawing and cut sheet
- Filing report and submit to QC Manager.

2)Track works as per stated below:
- Study drawing, specification and procedure of works.
- To observe and witness with format sheet for operation progress as per stated below:
- assembly and placement of turn out
- assembly and installation special track work
(cross over) tie placement and spacing rail installation flash butt welding
- thermit welding bonded joints distressing operation linear induction module installation
- power rail study and power rail installation
- cable trench installation - fine tuning track
- filing report and submit to QC Manager

3)Cut & Cover Work (tunnel section) as per stated below: - Inspection of Bored Pile:
- with 600 mm, 800 mm & 1200 mm of diameter.
- Checking reinforcement before installation
- Checking concrete before pouring.
- Inspection of Starter Bars:
- measured and make sure length of the starter bars as in order refer to the drawing.
- Checking the reinforcement for base slab before concreting
- Dealing with sub contractor & consultant.
- Reporting to QC Manager & Consultant.

December 1994 to May 1996: Teknispek Sdn Bhd
Damansara Height Kuala Lumpur
Position: NDT Technician
ASNT Level 2-MPI & DPI
ASNT Level 1-UT
ASNT Level 1-RT
Assistant General Inspector

Project: Esso Production Malaysia Inc (EPMI)

Offshore: Jerneh-A
Semangkuk-A&B
Guntung-A&D
Tapis-A,B,C&D
Seligi-A
Bekok-A
Tioman Drilling (T-2)

Onshore: Sludgecatcher Terminal (OSC) Kerteh.
: Terengganu Crude Oil Terminal (TCOT), Kerteh.
: Tepat Teknik,Kemaman Supply Base(KSB),Kemaman.
: Petronas Penapisan Terengganu (PPT), Kerteh.
: Promet-Petronas Terengganu,Teluk Ramunia,Johor.
: Sarawak Shell Berhad(SSB),Pasir Gudang,Johor.
: Antara Steel Sdn.Bhd., Pasir Gudang, Johor.

Scope of work: To carry out Magnetic Partical Inspection and Dye
Penetrant
: Inspection and Radiography Testing on various type of weld configuration and other material.
: Thickness measurement of material.
: Job including reporting and documentation as per client requirement.
: Shutdown job.

Nov 1993-Nov 1994: Sime Sembcorp Engineering Sdn.Bhd
Pasir Gudang,Johor

Position: NDT Technician
ASNT Level 2

Project: EPMI Jerneh 'A'
- Compression Module 2
- Compression Module 3
- Compression Module 4
- Compression Module 5

: EPMI Guntong 'D'
- Production Module 1
- Production Module 2
- Production Module 3
- Production Module 4

Scope of Work: Performed MPI on various type of beam plate and pipe with various diameter.
: Performed MPI and DPI on piping with various material type

Project: Sarawak Sheel Berhad (SSB)
- M 1 Living Quarters
- M 3 Living Quarters

Scope of Work: Performed MPI on M 1 and M 3 plate girder fabrication.

Project: Sarawak Shell Berhad (SSB)
Integrated Production Module-M3PQ-A

Scope of Work: Performed MPI on M3PQ-A Structure.

Project: Tenaga Nasional Berhad (TNB)
Diverter Valve and Guillotine for Pasir Gudang Power
Station and Paka Power Station.

July 1992-Nov 1993: Malaysian Shipyard and Engineering Sdn. Bhd.
Pasir Gudang,Johor.

Position: Machinery Fitter

Scope of Work: Performed – Overall Ship Maintenance.
: Repairing for diesel main engine and accessories.
: Repairing for diesel generator engine and accessories.
: Repairing and alignment for shafting and propeller.
: Repairing and alignment for turbo charger turbine engine.
: Repairing for anchor winch.
: Repairing for marine gearbox and marine clutch.
: Repairing and alignment for electrical pump and centrifugal pump.
: Repairing for hydraulic and pneumatic system.
: Repairing many type of valve.
: Repairing for bow trustier at marine container ship.
: Sea-trial.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 3001 to 3050 of 9905)Go to Search Parameters...
Brief Description
Drilling Engineer, Supervisor, Superintendent
HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).
15 years of utility/specialty chemical management experience.
. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.
Presents and reports the project status to the top management.
I am expert in Mechatronics field.
As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.
Refinery / Utility Plant Operator
07 years extensive experience holding a various positions in different phase of the projects in the field of Instrument Pre-commissioning, commissioning, start up,
NG reforming, Shift convertion, Syn gas production, Diffferent types of pumps and compressors, heat exchangers, catalytic reactor operation
I am a Mechanical Engineer and have more than 6 Years Experience in Piping Design and Stress Analysis Engineering. I have worked with CAESAR II software in developing Piping Stress Analysis and I also have substantial experience in the design of interactive CAD software; Moreover, my job involves sp
GIS/CAD specialist
As Cathodic Protection Engineer in Power Plant / Oil & Gas Industries with about 7 years experience; having knowledge on diverse Construction/Engineering Design /Commissioning/Maintenance activities with extensive experience on Cathodic Protection with NACE Level II certification.
I am searching for a job as a pipping stress and supporting engineer in KL, Malasia and I am expert in using CAESAR II and PDMS and ANSYS soft ware
Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.
A highly motivated, adaptable MSc graduate.
Plant operator
Surface well test engineer
I 'am a highly skilled Sr. Lead Operator, with a strong English language, highly motivated, always exceed my employers expectation, hold a 2 years Oil & Gas Handling diploma, various computer skills " SAP, Lotus, Excel, Access, Word, Process Net a semi HMI Building Progam.
Progressive EMS Paramedic Exp.
I have earned 20+ certifications and growing. Is attached to my resume.
Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience
Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins
More than 25 years experience in electrical field.
Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.
I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.
Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.
An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.
AWS, CSWIP 3.1 AND ASNT LEVEL II IN RT,UT,MPI & DPI
Pipe stress engineer with eight years experience.Software Caesar II.
8 + years Oil & Gas field experience in Instrumentation and Control engineering. Lastly Worked as Assistant Resident Engineer for Tyco Fire & Security, UAE
11years experience in the field Mechanical Maintenance of Machine shop and Foundry
Gas turbine, Boiler, Water treatment, Oil and gas operator
To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.
Condition monitoring Engineer with 7 years experience in oil and gas industry
I have been involved with many projects throughout these regions, from Heavy Construction, Platform Installation and Inspection IRM programs.Also I have more than 3 years experience in NDT/Welding Inspector in various project. I just recently pass my Subsea Insp. Controller CSWIP 3.4U(TWI-UK).
Piping, mechanical, stress analysis, nuclear
I have done Master from M.Sc. Chemistry. I worked in Shell Pakistan Ltd. as a Q.C.Analyst.
KNPC & KOC approved planning engineer for EPC projects,Involved in Planning and coordination for the KNPC GRTA- 2006 shutdownInvolved in Planning of Major Shutdown for KOC -GC 27
An experienced metocean engineer/hydrographic surveyor/GIS technician/coastal engineer seeking suitable positions in related fields
Welding and NDT Supervisor, Lifting Equipment Inspector
Subsea Pipeline & Riser Installation engineering with Offpipe or Orcina Software(Orca Lay, Orca Flex
Computer :
My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring
Welding Superintendent: SSCL. DME (3years welding), WI (QA/QC) 1992, Safety Training qualified and 21 Years Experience (QA/QC Welding Engineer-01 Year; Welding Supervisor--12 Years; Welding Educator-04 Years; Welding Instructor-02 Years) in working with ASME, AWS, API standard in EPC Industries
WORKING AS ASSISTANT MANAGER - PRODUCTION / SHIFT INCHARGE IN A LEADING PETROCHEMICAL COMPANY AT IMPORT, STORAGE & HANDLING TERMINAL
DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD
Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud
cartographer - gis
Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project
First   Prev   51   52   53   54   55   56   57   58   59   60   [ 61 ]   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com