Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #53432
next resume »»
CONTACT INFORMATION:
View contact information...
Current Posting: Field Service Representative -Drilling Fluids
Rig name: Bulford Dolphin Semi-Submersible Rig
Operator: Peak / Equator Exploration, Nigeria
Education:
1) Baker Hughes Drilling School, Houston, Texas, USA. Sept.2001- Nov. 2001
2) Obafemi Awolowo University( OAU), Ile-Ife, Osun State, Nigeria 1990-97
3) Ebenezer Grammar school, Ijeda, Ilesa,Osun State, Nigeria 1985-86
4) Ilesa Grammar School, Ilesa, Osun State, Nigeria 1980-85
5) C.A.C. Primary School, Ilesa, Osun State, Nigeria 1974-80
Qualifications:
1) Diploma in Drilling Fluids Technology
2) Bachelor of Engineering (Chemical Engineering)
3) General Certificate of Education O Level
4) West African School Certificate
5) First School Leaving Certificate
WORK EXPERIENCE
Company: Baker Hughes Nigeria Limited (Drilling Fluids)
Plot 268 Trans Amadi Industrial layout, P.M.B. 5241, Port Harcourt, Nigeria.
Date: August, 1999 to Present
Position: Drilling Fluids Engineer (Mud Engineer)
Responsibilities:
Field Mud Engineer on land, swamps and off-shore rigs (Jack-ups and Semi-Subs) in Nigeria. Worked on land rig in the Chad Republic for Exxon Chad operations.
Worked on different rigs using Water base mud systems:- PHPA, KCl Polymer, Aquadrill (KCL/PHPA/Glycol), KCL-PHPA system, HTHP Polymer System, Pyro-Drill system, Bio-Drill System, Lignosulphonate system, Saturated Saltwater System, etc.
Oil Base Mud:- Carbo-Drill, Carbo-Tec, Synthetic mud system: Iso-teq (Isomerised Olefin) & Para-teq (linear alkane) base fluids).
Workover and completion fluids involving the use of heavy or light weight brine, sized salt systems, sized Calcium carbonate systems etc and associated different well bore clean up pills & chemicals.
Co-ordinate load outs to the rig and manage well site inventories, etc.
Ensure that our operations comply with corporate and local requirements
Worked as a supervisor in the Liquid Mud plant at Onne, Port Harcourt. carried out mud formulation, mixing, blending, conditioning etc to meet clients needs.
Worked in the base mud laboratory. Carried out Quality Control operations for drilling, Completion and work-over fluid. Pilot testing different formulations to be used in the field for drilling, workover and completion operation. Ran pilot tests for formulations for tenders.
Company: Dubi Nigeria Limited, 12 PH-Aba Expressway, Port Harcourt, Nigeria.
Date: 1998 – 1999
Position: Solids Control Engineer
Responsibilities: NYSC / Field Engineer ( Solids Control Engineer)
Running of mud recovery units, Derrick hi-G dryers,
Centrifuges, De-sanders, De-silters,Shale shakers, mud vacuum.
For collection of cuttings, slurrification, storage, cuttings into skips for onward transportation to a thermal disorption unit.
Daily co-ordination of Company's activities at the rig Site
Maintenance, servicing and repair of equipment.
Installation of equipment / preparation and submission of well report
Job Related Training
(a) Basic Mud School (Principles of Drilling Fluids) 2001
(b) Microsoft Word and Excel application
(c) Baker Hughes Business Code of Conduct
(d) Advantage Application for Drilling fluids reporting/Calculations (2002)
(e) Repair & Calibration of Drilling Fluids Testing Equipment
Safety Courses Attended
(a) Helicopter Underwater Escape Training (2005)
(b) First Aid and Fire Fighting course
(c) Safety Leadership Training
(d) Fire fighting & Emergency Evacuation procedures
(e) Safety in Chemical Handling and Material Safety Data Sheets(MSDS).
Skills
- Appreciates the importance of team work & good communication on jobs.
- High level of adaptability in any working condition or country
- Ability to make projections and plan ahead to suit an ongoing job.
- Demonstrates a personal commitment to Health, Safety and the Environment.
- Ability to identify risks & hazard related to specific activities being executed & report on them
- Familiar with hardware/software for mud engineers to write or complete mud reports, manage well site inventories, access technical information and ability to learn new ones fast.
- Keep mud recaps updated, including an accurate reporting of mud properties & well conditions & procedures, as well as accurate tracking of inventories.
Professional Association::- Nigerian Society of Chemical Engineers
Hobbies: Reading, Travelling, Football (soccer),
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 5251 to 5300 of 10923)
Go to Search Parameters...
Brief Description
Total Eight and half years of Engineering, Commissioning and Maintenance experience of DCS/PLC in a petrochemical industry
Discipline leadership and management. Ten years experience in Oil, Gas, and Industrial Instrumentation and Control. Client based engineering experience. Major Projects include FEED, detailed design, construction, testing, commissioning of onshore and offshore facilities. Capital works projects.
14 years of successful work experience in Oil & Gas Reservoir and Production Engineering along with strong experience in Reservoir Management, Field Development and Field Operations
look at next resume
Assembles and installing conduit wire, power cables. Install control and distribution apparatus. Read labels manuals and schematic diagrams. Install electrical motors (0.25-850 kW). Work with power tools and measuring instruments.
7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00
NTNU, Trondheim Norway, June 2005
piping designer, my expereince included piping design, piping stress analysis and purchase docs preparation
Post-graduate in Marketing Management from a reputed institute in India. Experience of 14.5 yrs in Sales and Marketing. Exposures in the areas of Rural Marketing, Product sales, launch of a new product, Sales promotion, design & develop various sales promotional strategies & Supply & trading
Experience summary: Mergers and Acquisitions Advisory, Investment Banking, Valuations, Strategy Formulation and Implementation, Quantitative Analysis, Budget Planning, Commerical Proposals, Business Development, Competitve Strategy
I’m a polyvalent engineer (Drilling engineering degree, Pipeline and fluid engineering degree, and technician in Mechanics (Engines)). Boarding a solid experience in onshore drilling horizontal conventional and UBD wells (Drilling operations, Engineering, planning…) in Hassi-Messaoud- Algeria.
Electrical
Master Data Management
Mechanical Applications : PVElite 2009 & Code Calc 2009, Compress 6261
Planning, Material Mobilization,Installation & Execution, Testing & Commissioning, Documentation and Reports, Operation & Maintenance.
Hand Millwright in Boiler Area there my responsibilities are Erection of forced Draft Fan and Fuel Gas Recirculation Fan
Diplomed petroleum engineer , interested in finding a you in this field
Seeking an opportunity in industrial painting where I can apply my past work experience and be an asset to the company.
Instrument Technician/Senior, 16 years exp - FPSO exp, Offshore survival and medical, seeking an offshore position on a rotating schedule. Ex Hazardous, SEP, STOP, A+ & N+ computer skills, calibration, faultfinding, troubleshooting,loop testing, foxboro, plc, dcs, scp.fire and gas, safety, drawings
Mechanical Engineer
A highly motivated Instrumentation Engineer, experienced in electronic, pneumatic & smart instruments having Ten years of experience with Oil companies & multi-national companies.
Wellsite Geologist (Geological Operation)
I’m Petroleum Engineer. I have Bachelors degree in Petroleum Engineering. From the beginning of year 2008. until now I work as Pipeline Engineer in company SAIPEM ( member of ENI group).
Mechanical Engineer, Project Manager
A highly talented designer in the area of pipe for petrochemical complex. Using the information supplied by engineers and equipment vendors. Experience to work on P&ID's, vessel structural detailing, GA's, isometric piping, 3D structure design.
Senior Estimation Engineer for oil and gas construction projects
Experienced Supply Chain and Strategic Sourcing Specialist with Big 4 Consulting firm
I have over 9 years of experience working in the major international oil and gas projects participating in the activities at the different phases of a project. The areas of my expertise are: Maintenance activities support, Implementation of maintenance data base in CMMS
Experienced with Microsost Office, ie Excel, Word, PP, Access.
25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:
Over 8 years of experience both as a QA Inspector and QC Inspector in Welding and NDT Inspection in different Sectors of Engineering & Construction like LNG tanks, LPG Spheres, Chemical plants, Power Plants, Fertilizers Manufacturing Industries, Refineries, Shipyards, FPSO Conversion projects, Oil R
PDMS,Auto Cad,Hypermesh,
Cementing Engineer, Technical Professional
I am currently a process operator at Hovensa LLC, a 495,000 bpd refinery, located in the U.S.V.I. I am certified to operate both crude and vacuum units and am training to certify on an amine reclaimation unit. Job skills and responsibilities are listed on attached resume.
Chemical Engineer from Venezuela with unfinished MSc, FLAIR Operator in Geoservices, marketing research experience on Plastic Industries, Reservoir Simulation experience from PDVSA-INTEVEP. Interested to work worldwide, specially Australia.
Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995
I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.
Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs
Directional Driller 7 yrs Exp.
B.sc(Hons) chemical engineering with 7 yrs Experience in Drilling Fluids Technology
Material Engineer (Cathodic protection, corrosion, coating and painting)
Piping designer with 10 years experience of Oil & Gas, Petrochemical & Manufacturing industry.
Familiar work with computer office and internet
Electrical, Instrument, Electronics Engineering 20+ years
Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At Saudi Aramco
ELECTRICAL & ELECTRONIC ENGINEER/SAFETY OFFICER
I am a graduate of Geology from Olabisi Onabanjo University,Nigeria.I have my Master's in poetroleum Geology/Sedimentology from the University of Ibadan.I am proficient in the use of Microsoft office Suite.
5 years working experience as Draughtsman in construction, Oil and Gas indutry and steel fabrication.
HND Elect/Elect. Engineering[Telecommunication option].
Most of my experience includes researching abstract and running title in Texas and Louisiana. My experience also includes working as both a mineral agent and perimit agent for 3-D seismic. I have 3 yrs total experience in the business. Most recently I worked doing field due diligence in Louisiana.
First
Prev
101
102
103
104
105
[ 106 ]
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com