Resume - Piping Engineer - Stress analysis specialist engineer high pressure and temperat...

Misco Jobs

Resume #5355

CONTACT INFORMATION:
View contact information...

CURRICULAM VITTAE

(Sr. Engineer Piping, Stress analysis – UHDE INDIA LIMITED)

Experience
F 10+ years in Engineering for Power & Process Piping

Detail of experience
F As Sr. Engineer - Piping in UHDE INDIA Ltd. Mumbai. (from Jan 2003 continuing)
F As Sr. Engineer - Piping in MITSUI BABCOCK ENERGY INDIA Ltd. Chennai-10. (from June2000 to Dec 2002)
F As an Engineer – Boilers & Fired Heater and Reformer piping in BABCOCK BORSIG INTERNATIONAL DEVELOPMENT & ENGINEERING ASSOCIATES LIMITED.Chennai-32. (from Oct 97 to June 2000)
F As Design Engineer piping for chemical processing plants in M/s FLUIDTHERM TECHNOLOGY (P) LTD. an ISO certified company in collaboration with Herdieckerhoff GmbH. Germany, pioneer in Fluidised bed heat treatment furnace plant & Chemical processing plants piping. (from Sept. 95 to Oct 97)
F As an Engineer, during Sec - B of A.M.I.E studies, which is compulsory, in DRAFTS CAD SERVICES till Sept 95.
F Project completed on manufacturing of METAL ELECTRODES at MIP ALLOYS, under the Guide, Head of the department Guindy Engineering College, Anna University, Chennai, INDIA.

Job Profile AT UHDE INDIA Ltd
Stress Analysis & Special supports for high pressure & temperature piping for AMMONIA & UREA Plants, LAB, Caustic plants etc.
Stress analysis for Critical lines connected to pump, equipments, heat exchanger, vessels, turbines & compressors. Water hammer analysis for ammonia liquid line from Pump to Jetty.

Major Projects Handled & Working Role
QATAR FERTILIZER CORPORATION (QAFCO IV) -QATAR
ABF Bintulu, AMMONIA & UREA Plant - Malasiya
Project Management Consulting job for IOCL LAB project for SAMSUNG, IOCL INDIA. Approval for Stress & Supports for critical lines.
Titanium line analysis for Caustic plant Rafnes, Norway
Presently working for high pressure & temp lines for Saudi Arabia Fertilizer Corporation, SAFCO IV and lead stress engineer for compressor house.

TRAINING
Provide training to the fresh engineers on stress & supports.

Job Profile AT Mitsui Babcock Energy Ltd
F Scheduling, Monitoring, Controlling the engineering activities & providing the Technical Assistance to the engineering group at U.K.
F Preparation / Checking of equipment layout, piping GAD's, Isometrics & MTO using 3D Modelling package PDS, piping material specification, technical specification for pipes, fittings, valves & speciality items. Technical bid evaluation & purchase order requisition.
F Detailed piping flexibility analysis using CAESAR II.
F Preparing statutory drawings and documentation for approvals
F Coordination with other departments / disciplines
F Controlling the allocated budget.

Specialisation
F Detail piping flexibility analysis using CAESAR – II.
F Modelling of static equipment and analysing Nozzle load using WRC 107.
F Design of spring hangers & expansion bellows.
F Technical specifications, bid evaluation & purchase order requisition.
F Complete understanding of the code requirements, ANSI B31.1; ANSI B31.3 NFPA 8503; API; ASME & other power piping codes.
F Design & Engineering of Safety valve piping

Major Projects Handled & Working Role
F Taiwan Power Company - 2 x 550 MW power plant at TAICHUNG, Taiwan.
- Lead Engineer for Piping and Equipment
SCOPE:
Layouts, Stress analysis, isometrics & Support detail engineering and Specifications for Pipes & Fittings, valves etc. P&ID development for air sootblowing, purge & atomising air to burners, Instrument air to boiler house and aux. Steam to steam airheater & mills for inerting. Stress analysis, layout & support engineering for Pulverised fuel line from mill to burners, and all Boiler Drains & vents, Auxiliary Steam etc.

Responsibility:
Coordination with Client's consultant and Site erection team. Review of the total work carried out by Outsourcing agency. Planning & Scheduling to meet the key dates. Weekly review of the work with Outsourcing agency, structural team, Pressure part team and the equipment supplier for all the interface. Identifying the risks and discussing with other groups and Managers. Control of allocated manhour. Technical evaluation, recommendation and Purchase order specification, post order activities.

AT IDEA LTD.
F 2 x 300 MW power plant at PHA-LAI, Vietnam.
-Team leader & lead stress engineer

Responsibility:
Stress Analysis for Auxiliary steam & Drain lines, fuel oil lines, steam sootblower lines for Balance of Plant. Fabrication & Erection Isometrics of Balance of Plant: Auxiliary steam to Pulverisers, Fuel oil Heaters, Precipitator Hoppers etc. Fuel oil Piping internal & external to Boiler house. Auxiliary Steam to Oil Burner Atomisers. Drains for Furnace Wall. Drains for Boiler drains Vessels. Steam from final superheater to sootblower Control station. ETC.
Support Engineering & Support Detailing for Fabrication Based on Code BS 3974.
Technical specification for piping and supports. Technical Specification for Expansion joints for Primary Air Duct, Secondary Air Duct & Flue Duct with Equipments Interfacing. Technical bid Evaluation.

F 2 x 210MW power plant at NEYVELI, Ansaldo Energia s.p.a, Itally.
- Team leader & lead stress engineer

Responsibility:
Design Basis for piping and supports, GAD.Technical Specification for Manual Valves. Stress Analysis IBR (INDIAN BOILER REGULATION ACT ) Calculations. Fabrication & Erection Isometrics of Balance of Plant
Auxiliary steam to Fuel oil Heaters. Fuel oil Piping internal & external to Boiler house. Auxiliary Steam to Oil Burner Atomisers. Drains for Furnace Wall. Drains for Boiler drains Vessels. Steam from final superheater to sootblower control station. ETC. Support Engineering & Support Detailing for Fabrication Based on Code BS 3974 & Ansaldo Standard
F Lentjes, Gmbh
- Lead Stress Engineer
Responsibility:
Stress Analysis for convection coils & Soot blower lines.

F Methanol Reformer & Oleflex Heaters plant - Cleveland Bridge, Dubai / Foster Wheeler Fired Heater Ltd, Cannada / Chiyoda.
- Detail Engineer
Responsibility:
Stress Analysis Detail engineering for piping, supports & fabrication drawings based on the Standards provided by Chiyoda Corporation & meeting the requirements of Deutsche Babcock,
Abu – Dhabi. Detail engineering for convection & radiant coils.

AT FLUIDTHERM
F TAFE (India) & Bharat Forge, Pune.
Responsibility:
Prepared layout for Heat treatment plant
F Schwartz Gmgh, Germany
Responsibility:
Continuous Austempering plant, Designed the basic size of furnace and their accessories as per the component geometry as per type of heat treatment required. P&ID for plant. Coordinated in Fabrication & Assembly at Shop.

Computer Proficiency
Flexibility Analysis software – Auto Pipe, CAESAR II Latest Version. (Participated in Evaluation of the software for COADE before launch.)
FEPIPE: Ver 4.111 for local stresses at trunions & nozzles etc.
Intergraph PDS: PDS 2D (P&ID Development training taken), Design review.
Knowledge on other module also.
PDMS - Training provided at UHDE India – Piping, Equipment and Structural module.
Solid modeling - PRO-e
CAD - Autocad, CADWorx, Microstation
Planning software - MS project
Engineering package: Design Inhouse Tools and sound knowledge on operating systems.
Capable of learning any new programs.

Personal Details

Date of Birth: 29.03.1972

Educational Qualification: A.M.I.E. (Mech.) – Institutions of Engineers (India).
Further Studies: M.B.A (IGNOU) part time.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6451 to 6500 of 10902)

Go to Search Parameters...

Brief Description

Application for the Post In Engineering Department

Seeking a challenging career with in a reputed Company

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.

Engg.graduate with exp.in projects at various Breweries in India

actual position: Senior well site geologist

Senior Qa/QC For Oil/Gas Projects

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.

A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.

a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable

Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.

Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience

My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.

Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.

selling ABB Instrumentation Products Range, which includes the Installation, and commissioning.

An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.

Camp Supervisor Unit Manager English and French Teacher Sales Representative English Teacher (Sociology and Politics Departments)

With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.

I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.

As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.

Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.

Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.

Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. Extremely keen to have the opportunity of working within the any function in the oil and gas industry.

Please accept my resume for consideration.

Throughout the last five years I have gained valuable experience in both the academic and work related worlds and I am looking forward to applying my acquired skills to the position you have available.

Mechanical engineer.

Extensive experience in gas operations,vast knowledge of its systems and procedures.Considerable experience planning, putting together, maintaining and managing new facilities.Superior managerial, organizational and inter-personal skills that produce results.

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

I am a first class degrees holder in BE (Mechanical) and M.Tech (Energy Systems) and I have 2.3 years experience in the field of piping design and pipe stress analysis engineering and looking for a job in a reputed concern

I want to work in your company to improve professional skills, to obtain an engineering position in a petroleum industry which will enable me to utilize my analytical and interpersonal skills. Engineer with broad experience in seismic exploration, especially in the sphere processing 2D/3D data.

Analysis and Design of various Structures Analysis and design of vessel

Early Career Petroleum Eng, with trilingual (Incl Arabic) and Dual Master's degree (Petroleum and Computer Science).

Heavy Equipment Operator

Radio Operator Offshore

Redress Downhole Service Tools for well testing job such as circulating valves, control valves and safety v alves involved. Function and pressure testing tools, cleaning and buffing tools, back load and unload tools from baskets and containers

I am working with Barrick Gold Corporation, the biggest gold mining company in the world. It is a Canadian company having 4 gold mines in my country. I work in one of the mines as a Mine Safety & Training Officer. I am looking for the job in the gas/petroleum company.

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Senior Instrumentation technical. Diploma in electronics.

I have approximately 12 years experience in oil & gas industry. I am presently considering a position change with a company offering greater responsibility and more career advancement opportunity.

More than three years of industry experience including asset evaluation, reservoir simulation, annual reserve reporting, long term depletion strategy, enhanced recovery evaluations, expert witness testimony, economic evaluation and forecasting.

Russian/English/French speaking SAP materials controller.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 [ 130 ] 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out