Resume - 2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 AB...

Misco Jobs

Resume #5361

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

MARITAL STATUS: Married
NATIONALITY: Romanian
SEX: Male
RELIGION: Christian Orthodox
DATE OF BIRTH: November, 20th, 1956
PLACE OF BIRTH: Ploiesti

EDUCATION AND TRAINING

2000: Authorization for working in power distribution plant, Low and Medium Voltage Unlimited Power – IIIrd Level authorized by "ELECTRICA S.A." (The Romanian National Company for Electricity)

1999: Training Course for Instrumentation at PROGECO SISTEMI GROUP in Rosignano – Italy (using AutoCAD 14) according ITN
(Internal Standard of NUOVO PIGNONE - FIRENZE)
1996: Training Course for operating AutoCAD R12

1982: Serve in the Romanian Army

1975 – 1980: Polytechnic Institute Bucharest
Electrical Engineering Faculty

1971 – 1975:,, I.L.Caragiale "- College, Ploiesti

PROFESSIONAL EXPERIENCE

September 2003
April 2004

Veco Engineering Abu Dhabi, UAE branch of Veco Engineering Calgary, Canada
Position: Electrical Design Engineer
Engineering Design of Electrical Systems (Low Voltage and High Voltage).
Work included preparation of Conceptual and Basic Design for the provisions of the upstream facilities required for the development of the Melut Oil Field located in Southern Sudan.
The scope of the electrical activities within FEED was to provide:
- SLD's (Single line diagrams) for 0.4 kV Switchgear, 6.6kV Switchgear, AC UPS, DC UPS, Oil Wellhead, OGM, FPFs and CPF
- Electrical standard installation details
- Control Schematic diagrams
- Specifications for LV Switchgear, MV Swichgear, AC and DC UPS, Power and Distribution Transformers, LV and MV Cables, Electrical Heat Tracing, LV and MV Motors, Diesel Generators and Power Solar Systems
- Data sheets for LV Switchgear, MV Swichgear, AC and DC UPS, Power and Distribution Transformers, 33kV Ring Main Units, LV and MV Cables,
- Load schedules and feeder lists
- Equipment lists
- Hazardous Area Classification for Wellheads, OGMs, FPFs and CPF
- Cable schedules
- Cabling system
- Voltage drop and cable sizing
- Earthing and Lighting calculations
- Earthing layout for Wellheads, OGMs, FPFs and CPF
- Lighting layout for Wellheads, OGMs, FPFs and CPF
- Cable layout for Wellheads, OGMs, FPFs and CPF
- Lightning calculations
- Indoor and Outdoor lighting
- Emergency lighting
- UPSs sizing (110V DC UPS)
- Electrostatical protection study report
- Substation layout (Substation and transformer yard sizing)
- Transformer sizing (33kV/6.6 kV, 11kV/6.6 kV, 6.6kV/0.4kV)
- MTO's (Materials Take Off)
- MR' s (Material Requisitions)
for the relevant Wellheads, Oil Gathering Manifolds, Field Surface Facilities (at Adar and Palouge), AdarPipeline, Field Production Facilities (at Adar/Agordeed FPF and Palouge FPF) and Central Processing Facility ( at Al Jabalyn) within Melut Oil Basin, Sudan.

May 2002 –
August 2003

ABB s.r.l.- Romanian branch of ABB Automation Systems GmbH, Pipelines and Terminals, Mannheim - Germany
Position: Field Supervisor, Construction and Pre-Commissionning Group involved in Romanian National Crude Oil Transport System Rehabilitation - SCADA Project within CONPET s.a.
Responsible to carry out on site for:
- cable routing, supporting, clipping, glanding and termination of all the instrumentation cables in field and in Control Room;
- installation and connection of all the field instruments
(manifactured by ABB, SAAB, VEGA), junction boxes and
ROTORK valves actuators;
- testing of the installed cables ( KERPEN ) and instruments (ABB);
- installation and connection of ABB cabinets (ACS, RTU,
Marshalling, Flow Computer cabinet) in Dispatcher Room
- connections between ABB cabinets, Pump Monitoring Cabinet
(in Dispatcher Room) and MCCs (in Electrical Room)
- earthing and screening of all the instrumentation cables, field instruments, JBs, ABB cabinets and SCADA computer
- As built drawings

September 2001 –
April 2002

ABB LUMMUS GLOBAL s.r.o.- Brno, Czech Republic
Position: Electrical Design Engineer.
Performing design works by usage of AutoCAD 2000 and PDMS for:
C4 Olefins Complex Project within Sabina Petrochemicals LLC, Port Arthur, Texas – USA, composed of Shell, BASF and Fina.
Within this project I performed, according NEC-1999:
- electrical cables (OKONITE) routing from electrical substation to Ingersoll Rand electrical equipment (air compressors, heaters fans and s.o.)
- electrical motor schematic for ABB motors (100HP, 200HP)
- electrical cable routing from lighting panels to lihgting fixtures
- instrumentation cable routing from JBs to field instruments

February 2000 –
September 2001
S.C. T.I.A.B - S.A. (Installation and Automation Bucharest Trust - Ploiesti Branch) – a company specialized in the field of mounting for electric, automation, heating, ventilation and air conditioning installations.
Position: Electrical Design Engineer.
Performing design works by usage of AutoCAD 2000, as follows:
- the low voltage electrical installation for the hydrogen plant within "ASTRA" Refinery – Ploiesti;
- the low voltage electrical installation for the bitumen plant within "Rompetrol-VEGA" Refinery, Ploiesti
- the low voltage electrical installation for MIDIA LPG Storage within S.C. MARI GAS s.r.l.. - Constanta
- the low voltage electrical installation for SC PETROTEL - LUK OIL s.a. - Refinery, Ploiesti;
- the emergency lighting and emergency power supply within
" ASTRA STADIUM " – Ploiesti
In all the above mentioned projects there were used electrical equipments manufactured by Schneider Electric, Legrand, Moeller Siemens and ABB.
Position: Electrical engineer - Field Supervisor
Involved at the commissioning of the electrical installation at the MARRIOT GRAND HOTEL Bucharest (together with the Austrian company ALSTOM Contracting GmbH, as Subcontractor ).
I supervised the activity of 60 electricians involved in:
- low voltage cables pulling and installation for exterior lighting and interior lighting (hotel rooms, meeting rooms, restaurants, bars, laundries, casino, shopping area and s.o.)
- connecting for all the electrical loads belonging to all the above mentioned hotel areas

June 1999 - February 2000
PROGECO SISTEMI GROUP ( Italian Design Company )

TUGA (Gas Turbines) Instrumentation Department,
Position: Instrumentation Design Engineer
Concerned with design of the instrumentation equipment afferent to the turbine gas produced in ITALY at "NUOVO PIGNONE" – Firenze, using AutoCAD 14.
Within Progeco Sistemi projects, performing according ITN:
- the positioning of the JBs on turbine gas frame
- instrumentation cable routing from JBs to instruments
- wiring diagram for JBs
- electrical cables routing from JBs situated on gas turbine, to the lighting fixtures

September 1998 -
June 1999:

S.C. IPIP - PETROCONSULT GROUP S.A. Ploiesti (Romanian Engineering & Design Institute for Refineries and Petrochemistry),
Electrical and Instrumentation Department
Position: Electrical Design Engineer.
Elaborating design projects for electric equipment such as:
- electric drive for the paraffin press using frequency converters, within "STEAUA ROMANA'' Refinery – Campina;
- low voltage electrical installation for Fagaras filling station belonging to PETROM;
- provide technical assistance and site survey activities for the pumping units from various locations in order to elaborate the lay-out plans for the instrumentation cables;
- instrumentation cables routings for the Romanian Crude Oil Transport System collaborating with German specialists from ABB Automation Systems GmbH, Pipelines and Terminals, Mannheim – Germany.
- feasibility study for the electric installation afferent to the wasted waters epuration plant within " VEGA" refinery.
In all the above mentioned projects there were used electrical equipments manufactured by Schneider Electric, Legrand and Moeller.

January 1991 –
August 1998:
S.C. UPETROM – 1 MAI S.A. Ploiesti ( Oil Equipment Works ).
Mechanical & Electrical Department,
Position: Head of the electric workshop.
Supervising the activity of 200 workers.
Responsible for the following activities:
- the commissioning of the electrical equipment for a steel plant
- the mounting of mobile campus designed for Turkmenistan Republic ;
- the mounting and testing of four mobile drilling equipment designed for Belarus Republic;
- the general overhauls for the electrical equipment of the drilling rigs belonging to PETROM ;
- the preventive planned repairs of the electrical for machine tools, electrical cranes, electrical resistance furnaces all over the Prahova County ;
- the manufacturing of 500 electric switchboards for the pumping units exported in Russia.

August 1980 -
January 1991
S.C. UPETROM – 1 MAI S.A. Ploiesti ( Oil Equipment Works ), Electrical Department,
Position: Electrical Engineer.
In charge of repairing and maintenance for electric installations – power and lighting systems, executing various electric switchboards.
Responsibilities included overhauling of the electric part of machine tools and of thermal equipment such as heaters for thermal treatment, also performing overhauling operations for rolling bridges.
Familiar with the electric part afferent to following equipment:
- drilling rigs destined to export in various countries
(Russia, China, India)
- metallurgical equipment ;
- CATERPILLAR Diesel engines relevant to the cementing equipment;
- pumping units
- thermochemical treatment units.

SPECIAL SKILLS

- P.C. working experience with Windows 2000, Autocad 2000
PDMS, Microsot Office 2000 (Word, Excel) ;
- driving license from 1976 ;
- fluently speaking in English ;
- good level French, German and Italian language ;
- easy to join in a design team, maintenance service team or promotion team ;
HOBBIES
- traveling
- music

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 10811)

Go to Search Parameters...

Brief Description

Seismic Project manager and QC

Project Controls Estimator

Marine electrical fitter, 20 years experience, trade qualified, was a foreman in the field. Skilled in mechanical / hydraulic servicing as well.

This is to register my availability for contracts in the function above as detailed in the enclosed CV, U.K. or abroad. My most recent projects, all at senior level with direct bearing on Proactive HSE, Project Methodology, Quality and Timing have included.

HSEQ Manager and Integrated Management System Coordinator

Power Industry Plant Manager - Over 35 years of progressively diverse experience encompassing electric utility generation operation and maintenance, reliability improvement and facility management

i have worked with many multi national firms.I want to obtain a position of Plant manager/Maintenance manager/Service manager in your company. I have done courses under shell company Safety awareness. Incident and injury free. Defensive driving. Safety induction.

Project Engineering, Construction, Contracts, Commissioning, Start Up.

Drilling supervisor with extensive drilling engineering and operations background

Free! Versatile individual with 29 years of experience, 25 of which have been in the upstream oil industry performing in plant maintenance, operations field management, and mechanical integrity, also managed implementation of maintenance driven projects

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

I an am executive with 24 yrs of experience with success in start up, strategic planning, product management, sales and marketing, cost control, technology transfer of engineering/equipment /turnkey system being part of global cross functional team for strategy building and success in the region.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

Overall I have 19 years of experience in the field of Project Management, Administration, Secretarial, Document Control, Personnel and Procurement. For the last twelve (12) years I am working with Saudi Aramco and Petrokemya?s various GAS EPC projects.

Charted Engineering marien & mechanical engineering with PHD in Engineering management,20 Years experience as senior corrosion engineer in mining and petroleum industries. With 15 years in engineering management. Specialist engineer coating and Cp design.

I am a Project Manager/Mechanical Engineer with 33 years experience in both, International & local projects.

2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 ABB s.r.o. Czech Republic 2000-2001 T.I.A.b , Romania 1999-2000 Progeco Sistemi Group, Italia 1998-1999 I.P.I.P. , Romania 1980-1998 Upetrom S.A. Romania

Directing and maintaining the QHS&E efforts of the Region, to conform to Company policy, regulatory, and customer’s requirements. Developing Region policies, procedures, and related documentation. Interact with client HSE departments to ensure understanding of HSE Systems.

I am a no non-sense safety professional with a serious work ethic to accomplish company goals and objectives. I have over 20 years of HSE management experience with the last two years working in Russia on World-class Projects.

My skills are developing training plans & tracking using SAP, managing training records, training technicians developing CBT modules. Creating operating procedures, training modules. Word proc & Tech writing, Power Point, Outlook, Excel, SAP, Front Page. Inc/Acc Invest, TDC3000 & DCS operating, SWP

Ist class Chemical Engineer with vast experience in operation , Project Management , Engineering Management , Commissioning Management in Fertilizer , Petrochemical and refinery field.

Twenty five years in managing remote area field construction and logistical operations through out Asia. Construction of air strips, heli-pads, camp facilities, drilling location. Subsea Fiber Optic cable landing operations and post lay burial operations on and off shore.

Mechanic Engineer

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

DCS system engineering design, configuration, installation & commissioning.

20+ yrs in management and technical consultancy for the international oil and gas industry. Experience in organisation and business process development, change management, management systems and procedures, business performance review and development, HR and training management.

Regional office manager position handling material, transportation, local contracts, housing, food, utilities. Fluent in ARABIC, ITALIAN, SPANISH, ENGLISH, GREEK. Knowledge of Libyan culture, religion, customs, geography, and geopolitics.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Possess over 25 years experience onshore and offshore in the Health, Safety and Environmental Field.

Senior Project Manager with 25+ years of experience in the Oil and Gas industry. Extensive international experience on numerous EPC projects, both Lump Sum and Reimbursable. Excellent track record of delivering projects on time and under budget. i.e. profitable. Long list of satisfied clients.

Achievement-oriented professional with extensive experiences as HR & administrative executive with large exposure in Oil & Gas sector, with a strong background into project/ branch based organisations. Graduate degree and Master's Diploma in Business Administration (MDBA).

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

Polyester, Nylon,extrusion,plant management, manufacturing, sales

Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.

Dear Sir, I am looking for a job.Thanks for your email,

Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO

Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision

I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia

M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant

32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management

Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Dear sir, I would like to submit my application form for a suitable post of production engineer. Here is my CV below. If you want other document or information, please let me know.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out