Resume - E/I SUPERVISION for construction , commissioning of Oil & Gas processes

Misco Jobs

Resume #54009

CONTACT INFORMATION:
View contact information...

INSTRUMENTATION AND CONTROL SUPERVISOR

- 12 years of experience on instrumentation, industrial control (DCS / IPS / F&G / VMS…), electro technical, electronic.

- Experimented for construction, commissioning, start-up, operation and maintenance of industrials control systems.

- English current (including technical terms).

QUALIFICATIONS:

1991: BTS CIRA (Instrumentation and Control).
1989: Baccalaureate F3 (Electro technical).

PROFESSIONAL EXPERIENCES:

TOTAL (E.C.M) - Lobito - Angola – 01/11/2005 Þ 01/02/2007
Electricity & Instrumentation Supervisor on TOTAL-ROSA project for the construction of 2 modules to integrate on the FPSO Girassol.
Total representative on engineering design of Amec Spie at Cergy for verifications and queries on documentation of the whole Hook-Up ROSA project.
Supervision of the construction and precommissioning of modules in Angola.

AIR LIQUIDE (Serpro) - Ras Laffan - Qatar - 14/02/2005 Þ 26/07/2005
Electricity & Instrumentation Supervisor for the commissioning of one Helium's liquefaction plant.
Instrumentation calibration (transmitters and safety valves), preparation of tests packs and procedures, loops tests supervision, functional tests (motors startup sequences, Emergencies Shuts Down, alarms, trips…).
Control Systems: DCS Foxboro, IPS and F&G Triconex, Vibration Monitoring System Bently Nevada.
Chromatographs Orthodyne/Teledyne, Instrumentation Rosemount.

SAIPEM (Pro expatt) – Hazira - India – 10/08/2004 Þ 22/12/2004
Instrumentation Supervisor on Hazira's LNG project for the commissioning of a LNG port and terminal.
(LNG reception, unloading, loading, storage, regasification facilities and send out). Capacity: 2/5 MTPA.
Supervision of loops checks and functional tests (start sequences, alarms, trips, Emergency Shut Down) on the whole site (jetty, storage, process, utilities)
Supervision of troubleshooting and modifications during commissioning operations.
Commissioning of packages units in association with packages vendor's representatives:
Three Gas Turbine Generator, 4 MW each, gas/diesel Siemens (Typhoon); Boil off Gas compressors;
Submerged Combustion Vaporizer; Vibration Monitoring System (PLC Bentley Nevada); Tanks Leak
Detection System (fiber optic) ; F&G and PA/GA systems ; MECI gas metering and analyzer systems, Whessoe tank level/temperature/density measurements systems, pressure safety valves of cryogenics tanks.
Systems: DCS/ IPS/ F&G Yokogawa Blue star et console Centum CS 3000, Power Management System Siemens S7, Instrumentation Yokogawa.

ENTREPOSE CONTRACTING (IOTA-Group) - Nigeria (Kaduna) - 21/03/2004 Þ 31/05/2004
Instrumentation Supervisor for repairing project of the FCCU (Fuel Catalyst Cracking Unit) of one refinery.
Instrumentation commissioning and loops synchronization of a Raw Water Intake.

CERN (Air Liquide -Linde -Serco) - Switzerland (Geneva) - 01/2003 Þ 03/2004
Operation team leader on cryogenics tests benches of CERN for homologate super conducting cryomagnets of the LHC particle accelerator.
System: pcvue, labview, Windows NT, PLCs Siemens S5
Cryogenic benches: 12 Cryogenic Feed Box Air Liquide, helium liquefiers Linde 18 kW and 6 kW, primary and secondary pumps (roots) Leybold
Ultra-vacuum: vacuum pumps Pfeiffer and leaks detectors Alcatel …

ENTREPOSE CONTRACTING (Eurotech Export) - Nigeria (Warri) - December of 2002
Instrumentation Supervisor for the revamping of one refinery: supervision of dismantling, repairing, calibration of control and safety valves. PID diagram / process checks.
Control valves (2 - 400 bars) Nuevo Pignonne, Masoneilan, instrumentation Rosemount and Yokogawa.

NORELEC (TGB international) - Ivory Coast (Abidjan) - 27/03/2002 Þ 21/05/2002
Instrumentation Supervisor for the commissioning of an automation and control system of one refinery
(DCS Foxborro / IPS Triconex): commissioning of the control room, loops checks, technical assistance during the start up.

INEO - South West of France - 15/09/2001 Þ 15 /12/2001
Electro technical Supervisor (materials reception, work management…): pumping stations, cogeneration plant, paper mill, perfumes factory…

STESA (THALES) - Saudi Arabia (Ras Tanura) - 24/02/ 2001 Þ 30/06/2001
Power supervisor in charge to lead 8 maintenance technicians of security systems for refineries and LNG plants
Saudi Aramco (3 refineries, 1LNG, 1 pipelines dispatching unit).
Siemens HV/LV power distribution equipment (transformers, switchgears, breakers, diesel generators, UPS…) and Thomson electronic devices.

Divers works in western Canada (Alberta and British Columbia):
June1998 Þ June1999: tree planter, fireman, electronician for laser diodes manufacturer (Vancouver Island), electrician on boats in Victoria's marina.

FALCONBRIDGE - Canada - Raglan (far North of Quebec) - 01/02/1998 Þ 30/03/1998
Instrumentation technician for the commissioning of a nickel and platinum mine (DCS Modicon).
Troubleshooting activities at the «millwright» for the instrumentation department during the start-up.

C.R.I.Q. (Center of Industrial Research of Quebec) - Canada - Montreal - 10/10/1997Þ 31/03/1997
Realization of functional tests of electronic appliances in environment simulation rooms.
Cold rooms monitoring, tests procedures programming (Omron, Allen Bradley), data acquisition and interpretation (temperature, pressure, hygrometry), tests reports editing.

CERN (European Organization for Nuclear Research)-Switzerland (Geneva) - 03/01/1997Þ 31/03/1997
Electro technician on high power amplificators and distribution feeders of a particle accelerator (SPS).

UTAC (Tests and Control Department) - Paris - 01/09/1994 Þ 30/12/1194
Tests Technician for the anti-pollution department.
Setting of opacity measurement prototypes and realization of validation tests on rolling test bench in view of homologate opacity measurement appliances of European manufacturers (Sagem, Bosh, Facom, Technotest …).
Work with the acoustic department for tests processing.

RENAULT (Direction of Tests) - Paris (Lardy) - 17/03/1993Þ 18/06/1993
Maintenance of test benches for the anti-pollution department (12 analogic benches, 12 digital benches):
- Horiba analysis cabinets: gas analyzers (HC, NOx, CO, CO2, O2), automated micro valves web flowing, data acquisition processor (IBM / Masscomp).
- electronic driving simulators (air sliding and road binding frictions simulations).
- rolling benches (generator with Foucault current braking): standards, barometric, shed, 4x4…
Study and construction of improvements on analogic benches (automatic calibration of pollutant gases analyzers).

HONEYWELL - Paris - 12/02/1996 Þ 30/09/1996
Technician on Honeywell TGC systems (data processing, instrumentation and control, air-conditioning):
commissioning, troubleshooting and optimization of DCS systems on major buildings in Paris (Radio France,
Canal+, Eurodysney, Operas of Paris, UNESCO, Ministry of defense, of transports, CNRS, CEA…)

INTERIM PERIOD:

POULAIN - Blois – 11/1995 and 12/1995
Maintenance technician on chocolate production lines.

FOULD SPRINGER - Paris - 08/1995
Instrumentation Technician: wiring and calibration of instruments for agro-alimentary processes.

CIRMA - Bordeaux - 07/1995
Wiring of the electronic drive of a proton collider.

SPIE TRINDEL - Bordeaux - 06/1995
Electro technician: installation of the instrumentation of an oil-platform (Elf Congo - N'Kossa).

INDAGRO - Bordeaux - 05/1995
Electro technician: wiring of instrumentation and PLCs for the construction of wine bottling lines.

SBE (General Electric) - Paris – 01/1993 and 02/1993
Technician in the method service for the manufacturing of electronic cards of medical appliances (scanners, echography…).

EI - Bergerac - 08/1991
Electro technician: automation of a paper mill unit (electricity, instrumentation, automation)

SOFERTI (training period of BTS) - Bordeaux - 01/06/1990 Þ 30/09/1990
Automation project for sulfate alumna production unit.
Study and commissioning of one ph control of a fertilizers washing column.
Technician: calibration and synchronization of control loops on fertilizers (granulators, mills,) and acids process (phosphoric, sulfuric, Oleum, chlorhydric).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3501 to 3550 of 9772)

Go to Search Parameters...

Brief Description

Over 17 years pre-commissioning and commissioning experiences with proven experience in working with utility & power plant equipments.

A challenging position as a Mechanical Engineer where I can effectively utilize my engineering & personnel skills gained through Eleven years of experience

Petroleum engineer

Production Engineer in several methods as: Gas Lift, Rod Pump, Jet Pump, Plunger Lift. High knowlegment in the surveallence of production process. I´ve been working to Petrobras since 1998 in the Eastern & Western of Venezuela. Now I´m finishing a MBA I hope to finish in July 2006.

Do have 20+ years experience as coating inspector and am Nace certified coating inspector # 12470, highly skilled and specialised in pipe & tank coating, GRE linings, FBE pipe coatings/field joints, plural pump application. Work world wide. CV on request.

Mechanical Engineer with M.B.A. (Marketing) having 13 years of experience in the field of marketing/sales/expots of chemicals.

Mechanical Engineer - Maintenance / Planning / Project - 13 years of experienc.

Highly self motivated and goal-oriented professional committed to pursuing a long term career in petrochemical / chemical industries. Has 11-year experience on maintenance, repair and routine calibration, with strong analytical and problem solving skills, on analyzers.

Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer

More than 5 years of extensive experience of working on conceptual, basic and detailed equipment designing for Oil & Gas, Petrochemicals, Pharmaceuticals Plants including mechanical Design of Columns, Pressure Vessels, Heat Exchangers, wind & seismic analysis as per various national and internationa

I'am a Dutch Junior geologist. I hold a masters degree in Earth Science (university of Amsterdam). I worked little over a year in Almaty, Kazakhstan as a geologist/seismic interpreter. Flexible and willing to work in any of the CIS countries as a junior geologist. I speak Dutch, English and Russian.

A Post Graduate Mechanical Engineer with specialization in Energy conservation and management with an extensive experience in Basic Mechanical System engineering and Project Engineering for various range of power projects. Overall project coordination, Designing of various systems in Power plant

4 years of Experience in Oil Terminal Operations,Supply Chain,QA/QC

Familiar with Electrical & Instrumentation diagrams; Control & Protective relaying diagrams; Power System Single Line Diagrams. Able to perform material costing.

For the past 5 years my career with MES, CHEMIN,CEGELEC and TOTAL E&P, YEMEN has focused petrochemical, onshore oil and gas production operations in India and Middle East, now I am working as a Pre commissioning & Commissioning Engineer of the TOTAL E&P oil field located in Republic of Y

Currently Senior Piping Designer, responsible for design of piping systems to conform to codes and design parameters.

Business Development, Sales, Marketing, Procurement, Supply Chain, IT, Process Control, Rig spare parts, subsea, pump, valve, safety equipment, engineering services, E&I, SAP

DCS engineer having 5 years experience in engineering / Commisioning/ Start up of YOKOGAWA CS3000 DCS System

11 years experience as autho technician mercedes-benz

Currently I am working in a leading oil and gas consultancy firm as a process design engineer since last five years. Hands-on experience in CDUS, VDUS, Visbreaker units, Hydrotreaters, LPG recovery units etc. My responsibility includes process conceptual design, process simulation, PFD with HMB etc.

B.E. MECHANICAL ENGINEERING WITH FIRST CLASS WITH DISTNICATION FROM REGIONAL COLLEGE OF ENGINEERING & TECHNOLOGU, SURAT. (JUNE-2001.)

Process Engineer with 5 yrs of experience in Oil & Gas field;B.E. (Chemical Engineering) from Jadavpur University, Kolkata with 86.45% marks, Hands on experiance in HYSIS, HTRI, Flarenet

E/I SUPERVISION for construction , commissioning of Oil & Gas processes

„« Reservoir Engineering, fluid property analysis, pressure transient analysis, reservoir characterization, reservoir management, and good knowledge of production optimization (managing wells), and understanding of surface facility issues.

+15 years experience pulling ,running and comissioning ESP completions world wide. Run life development etc

Petroleum engineer in Oil Production (rotation schedule)

Electrical Engineer, Automation and Controls Dessign, Testing and Commissioning Engineer, Project Engineer, Support Engineer

Masters degree in Civil/Structural engineering with more than 9 years experience in Oil & Gas projects for prestigious clients. Have about 7 years experience on Canadian projects including modular engineering (lifting, transportation analysis). Proficient in US, Canadian and Indian Codes.

Competencies: NT Administration * Database Administration * Helpdesk Support * Hardware / Software Installation and Configuration * Disaster Recovery Oracle * Microsoft Visual C#.NET * ASP.NET * ADO.NET * SQL * T-SQL PL/SQL * Microsoft Visual FoxPro * XML * Windows 95/98/2000/NT4/XP * TCP/IP *Novell

A professional geophysicist based in Singapore, with extensive experience in various aspects of geophysical data acquisition, processing, interpretation and QA-QC of analogue and digital Surveys. Looking for challenging and interesting opportunities worldwide.

Material Engineer / Material Specialist (Cataloguing / Recommending Spares)

C& I Engineering & Design, EPC, P&ID, Project Management, HAZOP, Intools

i am intersted in working as a maintenance planner / scheduler

Complete information

Chemical Engineer having 19 years experience in Petroleum Refinery, Out of this I have worked for 16 years in India( former Esso Oil Company), Bombay Refinery from Oct-1984 to Sep-2000 and last 3-1/2 years have been working in KNPC, MAB Refinery in Process Engineering Dept.

A professional with 13 years experience in O&G in diverse areas worldwide (7 countries, 3 continents) seeking to be part of a dynamic team with multidisciplinary skills and competitive environments. Extensive international knowledge in: Management, Operations, Marketing, Training, Quality.

I have been working in the oil/gas industry for 18 yrs as a Technical Clerk/Assistant/Administration/Data Entry Clerk.

INSTRUMENT TECHNICIAN FOR OIL & GAS FIELDS

Cathode Protection Engineer / Manager with more than 10 years of experience in marine, off-shore etc with knowledge of design, tenders, standards etc.

Accomplished boilermaker/welder. My recent jobs have included high pressure pipe welding, building one gigawatt wind field towers, new ski lifts and towers, in addition to retrofitting older ones.

Expert in Environmental Engineering, I plan to work and live in Abu Dhabi.I am qualified in Environmental Protection for: Environmental Certification, Environmental Surveys, and Environmental Pollution Monitoring for Oil & Gas Industry with 10 years experience.

Professional Experience 1. Schering-Plough Singapore as Control Systems Engineer 2000-present 2. Yokogawa Philippines Inc. as DCS Systems Engineer 1996-2000 Education 1. Bachelor of Science in Computer Engineering 2. Diploma in Instrumentation & Control Technology

Over Nineteen plus years of experience in the areas of Maintenance Management, Planning and "Hands On" Supervision of maintenance activities, installation and commissioning of new facilities.

A Chemical Engineer with over 12 years of experience in the field of Safety & Risk consultancy. Trained in leading HAZOP studies, QRA, HAZOP, HAZAN, PHA, Review of Fire Detection & protection Systems, Safety Audits, Transportation Risk Analysis, Insurance Risk Surveys, etc.

Currently, attending MBA (oil and gas management) program, at University Of Dundee. Marketing and management skills are core subjects. Ten years of experience in the chemical process industry. terminals operations. Good communication skill and computing knowledge.

Senior wireline logging engineer seeking a full time position as logging witness/supervisor

Highly motivated candidate with geochemistry background, looking for first job in industry. Excellent computer and communication skills.

Electronics Engineer/Technician

I have 16 years of experience in welding and NDT Inspection. I have welding and Painting Inpsection Qualification. I have experience in pipeline, process piping, pressure vessels inspection.

Construction, Pre-commissioning, Commissioning & Operations of Gas Cracker Unit (4,00,000 TPA of Ethylene)

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 [ 71 ] 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out