Resume - Instrument and control technician

Misco Jobs

Resume #54242

CONTACT INFORMATION:
View contact information...

Education:
1992 Passed from Elementary School
1995 Passed from Junior High School
1998 Passed from Senior Technical High School
2001 Passed from Polytechnic Negeri Sriwijaya

Computer Skill:
1. Microsoft Office: Microsoft Word, Microsoft Excel, Microsoft Power point, and Microsoft Access

2. Familiar with Maximo and SAP program application database.

EXPERIENCES:
1. Company PT. INTI COMPUTER
Period October 2001 ¡V April 2002
Position Hardware and software Technician

2.Company ConocoPhillips Indonesia, Grissik Gas Facilities
Period April 2002 ¡V Present
Position Instrument Technician

Nature of Job

* Perform Preventive and Routine maintenance activities,
* Troubleshoot and repair Instrument Measurement and Control systems, Including Allen Bradley PLC's, DeltaV DCS and RS3 DCS from Emerson Controls.
* Develop Maintenance Procedures for routine Instrument activities
* I have followed Technical Training program that incorporates the Southern Alberta Institute of Technology (SAIT) learning materials. In conjunction to this there is an in-depth hands on training program. The program is mentored by a Canadian Graduate from NAIT and SAIT with over 24 years of experience in the field of Instrumentation and Electrical.
* Carry out fault finding, maintenance and troubleshooting on ESD system, Waste Heat Boiler, Gas regent Heater, Heat Medium Heater, Burner Management System, Glycol Reboiler, Gas Turbine Generator, and Gas Turbine Compressor.
* Direct Instrument Technician in carrying out all aspect of maintenance, modification, calibration, troubleshooting and testing of control instrumentation in the process and utilities area of gas plant.
* Develop Maintenance strategy,identify critical part, and Create Maintenance procedure for Common instrument Job and requirement.
* Create task analysis, PRAC and update safe work procedure and JSA for the new equipment and changed instrument equipment. Ensure all procedures or JSA are socialized to others group and copy to HSE dept. for HSE dept data base

PROFESIONAL TRAINING:

ƒæ Participating in Gulf Grissik Instrument Training Program for 2 years
ƒæ Delta V for Engineering by PT. Control System on October 2003
ƒæ Gas detector by Industrial Scientific by Vendor
ƒæ Attend all safety and HAZOP training at CONOCO
ƒæ Get Instrumentation training which held by CONOCO
ƒæ PLC-5 Training maintenance and troubleshooting by Rockwell on April 2005.
ƒæ Operation and maintenance of gas turbine generator and compressor on July 2005 which held by PT. Pakarti
ƒæ Maintenance choke valve Mokveld on July 2005
ƒæ PLC Advanced Training Maintenance and troubleshooting by Rockwell on September 2005
ƒæ Centrifugal gas compressor optimization training by PT.Pakarti on April 2006
ƒæ Mandatory Safety Training Grissik By Global Training Center Canada

„X Defensive Driving Level 1
„X Defensive Driving Level 2
„X Work Hazard Material Industrial system
„X Gas Testing
„X First Aid
„X Safety Standby
„X Respiratory Protection
„X Confined Space
„X H2S

CRITICAL SKILL

* Strong safety and environmental awareness
* Creativity and quick response.
* Strong teamwork/networking ability
* Strong personal leadership ability
* Strong personal motivation and self learning
* Effective communication
* Effective people development
* Decisiveness and good judgment
* Fluent English both oral and written.

Others

Willing to work hard, good motivation, high motivation to know new technology and knowledge, good team work, good communication with other, good trouble shooting, and capable to handle Gas Plant and familiarities with ESD/EDP system, Fuel gas system,air instrument system, Good knowledge about Sweetening process as Amine system, Dehydration process as Glycol System, Familiar with control logic and sequence startup equipment system such as Heat medium heater,Regent Heater,Waste Heat Boiler,Glycol reboiler,good knowledge Delta V DCS and RS 3, Strong performance with Programable Logic Control Allen Bradley, Able to Read P&ID / PFD.

ILHAM

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6051 to 6100 of 10849)

Go to Search Parameters...

Brief Description

Production operation to hanling : FPSO crude oil & gas process and production, Well test of well performance, Oil and Gas custody metering system on terminal facilities, oil gas and LPG process to stabilized and to storage tank, Able to perform HSE regulation right as usual at each oil & gas company

I bring with me a Bachelor of Science degree in Earth and Environmental Science - major in Geology along with nearly five years of experience with Geologic Interpretation and Technical Support. I also have an applied degree in Petroleum engineering from SAIT with a little experience in reservoir eng

Over 15 years experience in various aspects of Oil & Gas Industry. Have been involved in Platform and Process plant Operations and Maintenance, well services operations, Turnaround and topsides maintenance, and hook-up & commissioning, FPSO operations, Engineering and Constructions etc.

Certified Facility Manager

12 Years on offshore industry working with subsea installation of equipments (manifolds, suction piles, PLETS etc) and flexible lines in shallow and ultra-deepwater; subsea connections; pull-ins; remote and dive assisted interventions; inspections, maintenance and subsea repairs; stand alone equip

Field oriented structural geologist; Highly adept at working both alone and as part of a team; Strong analytical thinking; Technical writing and speaking; Multi-lingual; Eligible for Professional Registration; Willing to travel

Good technical skills, Like to work with computers, Internet, Driving license category B.

6+ Years of experience in all aspects of Technical and Development my skills and abilities in the any Industry that offers Professional growth while being resourceful, innovative and flexible.

expirience in hydraulic fluid connectors

20 years experience in accounts & administration with reputed organisations like Trading, FMCG, Manufacturing, Oil Industry

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

Automotive Service Technician (Mechanic

WITH profil of graduted technician in electromecanichs and an hight experience in petrochimical industry

Chem Analyst - Laboratory Technician

I have done D.A.E. (Diploma of Associate Engineer). My experience is more then 4 years at fertilizer plant. I am currently working in Fatima Fertilizer Company. I have gained hand on experience of Maintenance, Troubleshooting and Installation of the plant. I am fully aware of the

using AUTOCAD

Working as a welding engineer from last 2 years.having background of metallurgy.

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

Bachelor Degree in commerce

Experienced oil and gas operations manager with proven record of production optimization, safety and personnel development. Experience in pipelines, gathering, compression, NGL, amine, automation, shale as well as conventional oil and gas operations including drilling, completions and workovers.

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

I am presently working as Manager (Mechanical) with Engineers India Limited an ISO 9001 CONSULTANCY ENTERPRISE of Govenment of India & supervising on behalf of owner all piping and equipments installations in PTA - project of Indian Oil Corporation at Panipat Haryana India.

DP Technician/ ETO/ DP Operator

PDS, Piping Designer, Smart Plant Review, AutoCadd, PDMS

Type 65 wpm, Microsoft Excel, Microsoft Word, QuickBooks Enterprise, PowerPoint, Delorme XMap, excellent phone skills, highly organized work habits, accounts receivables, accounts payables, reconciliations, volume discrepancies, allocations, etc.

I study physics electronics teschnology and i measured 2:1. I am good in computer assembly and installation, microsoft ms, excel, powerpoint

I am an enthusiastic dedicated person. I have the ability to work alone or in a team environment to complete any given task with utmost care and competency. Ensuring that all tasks are properly planned, to achieve the highest level of safety as so the tasks can be execute incident free

Strong communication skills, strong HSE knwoledge

A computer literate and good skill in practical weldind

- Exceptional Learning Ability - Excellent Communication skills - Eclectic Reading - Striking ability to absorb information - Good Interpersonal relations - Ability to perform under pressure - Ability to work as part of a team - Ability to meet deadlines - Self – motivated - Goal - Driven - R

Recent mechanical engineering graduate searching for employment as an EIT.

Mechnical engineer

Young and Dynamic candidate seeking career within Oil and Gas or Petrochemical Company with relevance to Chemical Engineering Background. Excellent common-sense and decision making abilities. Self motivated, hardworking individual also strong team spirit and willing to travel.

Entry-level candidate

Time served Mechanical fitter with 20+years experience on a variety of petro-chem processes.DCS control room operator. PPO2 in processv technology. Nvq3 in mechanical fitting.

Have knowledge in Protocols like MODBUS, 101, 103, 104, RP570 and in micro scada,Have worked in debugging and testing of protocol converters and interface converters. Have worked with fiber optic converters, RS232 and RS485 communication cables,Have also worked in PMS (Power management system)

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

Over five years of Mechanical Engineering experience in various organizations in US. * Highly proficient in development, design and analysis of Energy systems like Industrial Gas Turbine, Aero derivative Gas turbines, Fuel Cell Systems.

Project oriented, cost cutting manufacturing professional with 15 years of progressive experience in Procurement, Materials Management and Project Management. Specializing in Supply Chain management to include outside processing. Completed APICS certification courses in 2002. Passport obtained in

PIPING DESIGNER/DRAFTSMAN(PDS/PELICONFORGE/SPR/CAD/MICRSTATION)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Instrument and control technician

looking for mechanical/welding inspector position

Educational Qualification: Passed Diploma in Software – June 1999 Diploma in CAD - March 1991 Diploma in Piping D’man – June 1987 Diploma in ITI D’man (Mech) – January 1987 Plant Designing Management System (PDMS) Ver.11.5

Based on my experience for 15 years working in the Planning and Scheduling with different company and different style of Management also with various type of EPCIC Project I did involved in like Building Constructions, Petrochemical Plant, Offshore Platform (Hook Up and Commissioning) and Turnaround

Diploma of Associate Engineer (Electrical) Working in boc gases as E&I shift engineer.

-6 years experience in Pipeline, Environmental and GIS Project

-Seeking a challenging position in the Mechanical Engineering field especially in the oil and gas. -Solid engineering experience including maintenance, design, manufacturing and oil and gas experience -Bachelor Degree in Mechanical Engineering The University of Reading, England. UK

After having mainly matured experiences in the management and maintenance of computer and telecommunication structures of the Company where I worked until last December, now I wish to do new experiences and to develop the old ones in a stimulating and interesting environment.

Chemical Engineer with 6 years experience in Drilling, Pipeline Operation, Construction, Economic Modelling, Health, Safety and Environment, together with Sustainable Development and Issues Management. 6 languages and American Citizenship, would like to work in Houston, Texas.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 [ 122 ] 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out