Resume - I've been 18 years experience in Petrochemical and Oil&Gas and my position now ...

Misco Jobs

Resume #54262

CONTACT INFORMATION:
View contact information...

Education: Dip. Public Administration
SPM (Malaysia Education Certificate)

CAREER AND OBJECTIVE

To seek challenges and responsibilities that utilizes my capabilities and interest in petroleum industry that encourages job and personal development.

CAREER AND OBJECTIVE

To seek challenges and responsibilities that utilizes my capabilities and interest in petroleum industry that encourages job and personal development.

CURRENT JOB

As a Operation Foreman for Petrodar Operation Oil Company (PDOC) in Republic of Sudan since 12th Oct 2006 until present.

Job scope: To manage smoothness plant operation as per instruction by management and to apply and implementation all safety procedure as per regulation.

Job scope covered;
1. Pig Operation
Pressurize/Depressurize the Receiver in order to do a Leak Test and to ensuring when the Pig was arrived, there is spillage from the Receiver door.
2. Dewatering
Dewatering of crude oil was happen when the crude in to Surge Vessel and Electrostatic Dehydrator (EDH). In Surge Vessel, the separation only done by gravitation of oil and water but in EDH, the separation of oil and gas was happen when the EDH was heat up to 98 or 105¢XC or 98¢XC. The gas was removed in EDH and sent to Cold Vent Knock Out Drum, where the gas heat up again and soaked with water before it was removed to atm. Demulsifier chemical was added in to EDH in order to make a better separation between water and water. In this stage, Boiler's or Heaters are playing the major role of separation crude from water.
3. Degassing
Crude was treated is to sent to Gas Boot where the crude was cooling and the separation is more efficiency by vent the remaining gas before entering the Product Storage Tank and to export line.

1. WORKING EXPERIENCE

November 2005 ~ October 2006
Position: Training Coordinator & Operation Supervisor
Ranhill-Petroneed Join Venture RPJV,
Melut Basin Oil Development MBOD,
Block 3&4 Al-Jabalyn CPF, Khartoum,
Republic of Sudan.

Involved in the Engineering, Procurement, Construction and Commissioning (EPCC) of Melut Basin Development Project at Al-Jabalyn CPF and Palouge FPF, Sudan.

RESPONSIBILITY AND JOB FUNCTION

* As a Operation Supervisor during crude in and start up the plant in successfully without any interruption and problem.
* Capable to operate the Boiler (Including the problem troubleshooter), Air Compressor, all related pumps and motor, all related Process Trains equipment such as Electrostatic Dehydrator, Crude-Crude Exchanger and Crude Oil Heater and all Utilities related such as Water Treatment Plant, Diesel Skid equipment, Fire Water System.

2. WORKING EXPERIENCE

December 1998 ~ November 2005
Position: Production Executive
Polyplastics Asia Pacific Sdn Bhd
Kuantan Pahang DM Malaysia.

Perform Pre-commissioning, performance test, commissioning, operation and Polyplastics Asia Pacific Sdn Bhd.

RESPONSIBILTY AND JOB FUCTION

„X Manage a group of shift technician and shift helpers to operate the Plant and shift activities in proper and safe manner.
„X Ensure and responsible for maximum of yield and high product as per production schedule and minimum effect to environment.
„X Guide, supervise and direct the shift worker in executing operation tasks in order to achieve a safe, efficient and cost effective plants operation.
„X Lead the shift team toward practice of Total Preventive Maintenance, 5S and multi skill activities.
„X Communicated with Maintenance and Contractor due to out standing items and progress.
„X Issued work order to Maintenance and check, verified and approved the work permit for Maintenance job.
„X Coordinate and provide training to sub-ordinate.
„X Coordinate Shift safety monthly meeting.
„X Coordinate morning meeting for shift worker and monitor daily progress.
„X Plan and recommended necessary training for shift member.
„X Coordinate and submit safety audit, Departmental Monthly Safety Report (DMSR) to Plant section manager.
„X Ensure all shift members were motivated and work as a team.
„X Ensure the communication flow between both management and employees are proper.
„X Carry out confirmation and annual performance development appraisals for Shift Supervisor and technician.
„X Assist manager to prepare customer complaint report.
„X Assist Engineer to prepare Capital work request.

3. WORKING EXPERIENCE

Jan, 1992 to Dec, 1998
Position: Senior Process Technician
Titan Polyethylene (M) Sdn Bhd
Pasir Gudang, Johor DT Malaysia.

Perform Pre-commissioning, commissioning and performance test at Titan Polyethylene Plant for the following unit;
* Polymer unit (Reactor ¡V produce Polyethylene flake from Ethylene (C4 gas)
* Extrusion unit (Produce polyethylene pellet from Polyethylene granular after feed additive)
* Perform as a Boardman (Honeywell TDC3000, Yokogawa)
* Perform a Fire Leader during an Emergency
* Perform as a unit line trainer for newcomer staffs.

RESPONSIBILTY AND JOB FUCTION

* Monitor the Polymer unit and extrusion unit trough routine check and patrol.
* Carry out start-up and shutdown for above plant unit.
* Prepare area/equipment for handover to Maintenance or Instrument group to maintenance job. Ensure that required permit work are followed prior to perform the job.
* Carry out flow calibration equipment.
* Carry out sampling task.
* Carry out preparation and stabilizer/additive charging.
* Carry out stabilizer inventory check.
* Record the required process condition in DCS & field log sheet.
* Monitor the cleanliness and perform "housekeeping" (5S concept).
* Hand over shift duties and attend morning meeting.
* Attended training that carry out by company to meet plant requirement
* e.g. ERP training, Fire training, STOP training, First aid training and
Take Two training.
* Undertake other responsible by Superintendent by time to time.
* Perform as unit supervisor during absent of Superintendent.
* Assist prepare SOP for Plant operation.
* Planning the operation during transition grade and communicate with planner.

SKILL

1. Familiar with computer program i.e Microsoft Word, Excel, Power point and etc
2. Knowledge in Distributed Control System (DCS) TDC 3000 and Yokogawa Centum CS
3. Knowledge in Fire Fighting equipment and as a Trainer for Fire fighting training.
4. Knowledge of ISO9001, 9002, ISO14000, 14001 and TS16949.
5. Able to drive Forklift (get certificated on it).
6. Knowledge on Statistical Process Control.
7. As a Plant Shutdown Coordinator during plant Turnaround.
8. Experience in commissioning plant Petro-Chemical and Oil Gas.
9. As a Forklift Instructor and Coach for Red Crescent Malaysia.

COURSE ATTENDED

1. 21st April 1992 The Forklift Truck Safety Course
2. 1st Dec 92~31st Jan 1993 Generic Process Equipment Operation (API Series)
3. 26~30th Jan 1993 Fire Preventive Training
4. 3~5th May 1993 Fire Fighting Course
5. 30th Nov 1993 Coach Trainer from Malaysia Red Crescent
6. June 1994 Cooling Water Program Operator Training
7. 13th~14th Nov 1995 Emergency Patient Care Training
8. 2nd Feb 1996 Cooling Water Treatment Seminar
9. 24~25th Sept 1996 Practical Fire Team training
10. 11~12th Nov 1997 First Line Crew Course
11. 24~26th Aug 1999 Centum CS Operation
12. 3~4th Apr 2001 Train the Technical Trainer
13. 9th May 2001 Introduction to Industrial First Aid
14. 10th July 2002 Forklift Safety & Operation Facilitator Training
15. 10th July 2002 Safety Operation And Preventive Maintenance Service
16. 20th Aug 2002 Microsoft Excel Intermediate
17. 16th Mar 2004 ISO/TS 16949 A Strategy to Implementation
18. 31~1st Apr 2004 Developing Coaching & Mentoring Skills Workshop
19. 28th July 2004 Microsoft Word 2000

20. 18th Aug 2004 Microsoft Excel Advance
21. 12~13th Sept 2004 Fire Team Development
22. 23~24th Sept 2004 Measurement System Analysis 3rd Edition
23. 14~15th Dec 2004 5S Facilitator Course
24. 6~7th Oct 2004 Occupational Safety And Health Management System Seminar
25. 4~5th July 2005 Workshop On Managing Difficult Employees Using A Counseling Approach
26. 5th~6th July 2006 Combine Safety Course (Refresher)
(Sea Survivor, Helicopter underwater escapes training, Fire Extinguisher & Safe Rescue)

Earliest Availability: 1 month notification.
Current Salary: USD4000
Expected Salary: USD6500 negotiable

REFERENCE
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 9905)

Go to Search Parameters...

Brief Description

Engineer / MBA with 17 yrs exp in oil & gas, LPG Industry

Seismic Analysis: AVO, spectral decomposition, Seismic Inversion, attribute analysis, Shallow Hazards Analysis, Geopressure.

Self motivated and experienced sales & marketing manager that always gets results

Over 30 year’s professional inspection experience in the petroleum refining, chemical process and electrical power generation industries. Extensive experience performing American Petroleum Institute 510 inspections on pressure vessels and American Welding Society Certified Welding Inspec

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

30+ years petro=chemical/construction QA/QC experience

Integrity & RBI Inspection Engineer

I've been 18 years experience in Petrochemical and Oil&Gas and my position now is Operation Foreman for Petrodar Operating Company in Republic of Sudan in Oil & Gas company. My responsibilities are to manage the operation of crude oil production which is daily capacity 200,000bbl/day.

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

IT specialist, professionally qualified in Management and Computers(M.B.A Information Systems, Masters degree in Computers, Bachelors degree in computers) with 9 years of proven hands-on technical and management experience.

Over 15 years of successful consultative sales experience in both the software application, enterprise level solution and service markets. Sales, sales management and business development positions held with a wide range of technology related and innovative solution based organizations.

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

Myanmar/ Singapore PR, MSc in Manufacturing and BEngg in Electrical Power, Total 7 year experience in electrical power, able to do LV design, maintenance, service and commissioning for marine and offshore industry

Maintenance, verification and run in hole of Quarz electronic memory down hole gauges for data acquisition involving static pressure survey, Flowing gradient survey, flowing pressure survey, maximum efficiency rate survey, injectivity / fall off survey, interference test, build up test.

I am qualified mechanical/piping engineer, with extensive experience in pipe stress analysis, hands on experience both in design and field operation.

Oil and gas production operations Specialist with over fourteen years of onshore and offshore diversified and solid experience in many facets of production and oil storage and movements operations. My most recent experience was in the middle east

Project Management/ Project Superintendent- Electrical & Instrumentation abilities- Construction/ Mechanical Completion of Offshore Production Facilities. Commissioning assistance during construction phase. managing personnel up to 200 E & I field craft.

Electrical operation and maintenance

Experienced, geotechnical engineer / exploration geophysicist

HR Generalist possessing 5.5 years of exp in handling Recruitment,Performance Appraisal,Training & Development,Compensation and Benefits,Statutories for various industries like IT,Engineering & Manufacturing,Oil and Gas,Pipe Engineering Project.

I have passed through the whole production system, as production tehnologist and production supervisor

Level Five Ticketed Jouneyman Well Test Supervisor

Field service engineer for gas turbines and generators. Controls and electrical studies background. Working experience on several fields (construction, refinery, maitenance and operation)

Document controller with a total experience of more than 6 years. More than 3 years of experience in documentation using SAP EDMS in a Petrochemical company in Saudi Arabia.

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

Instrumentation & Control Systems Engineer: Honeywell TPS and ABB Infi-90 Open DCS(Distributed Control Systems), Triconex and ICS Triplex TMR PLC(Programmable Logic Controller) and Process Control Instrumentation.

Project handling and management as piping engineer

HSE / SAFETY SPECIALIST

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

i am a geologist with 9 years experince, i have an experice with some geological softwares like Gravitas, powerlog, winlog, CPS3, stratlog and OFM, i did a supervision for mulogging, wireline and LWD jobs,

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

Worked for a leading group of manufacturing companies in kuwait as store incharge, imports purchase officer, iso 9001 internal auditor for differenct periods of time. Presently working as Quality Inspector in Inward section for ADGAS LNG manufacturing company in offshore Abu Dhabi

Procurement of All Electrical & Instrumentation Items

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

6 years as process operator, 5 years as chemist. 1 year as comissioning technician,formation in DCS (distributed control system)Yokogawa

good experience in mechanical oil and gas equipement

Machanical engineer as 14 years exprience in manufacturing of cathodic protection anodes ,design and manufacturing of electrochlorinators and special metal fabrication

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

8+ years of work experience in Project controls, planning and cost engineering in the Owner/operator as well as EPC role with the most recent being with Colt Worley Parsons Eng. Earlier to that I have another 7 years of experience in Electrical engineering design discipline with Stork Comprimo .

Chemical Engineer with 10 years experience working with Reliance Industries Ltd

Skills -operator rotary, derikk,mecanic pump hidraulic fluid,electrical -electronic

„X Expertise in oil & gas/petrochemical, onshore piping and offshore top side piping.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fully qualified landman with 27 years of experience, in all aspects of the industry

Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out