Resume - I am full confident about the any job of analyzer/instrumenation for detail see ...

Misco Jobs

Resume #54783

CONTACT INFORMATION:
View contact information...

Naveed Akhtar

Objective:
To find a challenging job in a challenging environment to show my capabilities

Academic Qualification

1:- Metric with Science (SSC) from (high school)
2:- DAE (Three years Diploma of Associate Engineer in Instrumentation) from (Government Ploy technique institute

Working experience (08 ~ 09 Years)

1. Jubail United Petrochemical Company (SABIC) Kingdom of Saudi Arabia

Duration: From April 07, 2004 to December 03, 2005.

Ethylene Plant
Worked on DCS during the project phase and performed following responsibilities
ƒæ Complete interlock testing
ƒæ Fault diagnosis on both software and hardware.
ƒæ Modifications
ƒæ Graphic designing and modifications
ƒæ New loop assignments.
ƒæ Complete loop checking.
ƒæ Commissioning and start up support
ƒæ Modification on safety shut down system (Triconex TS1131)

EO/EG (Ethylene Oxide and Ethylene Glycol Plant)
During the plant erection and commission I was responsible of following activities as a QA & QC inspector to take over the charge from client Flour Arabia Ltd. and Toyo Company.
ƒæ Verification of the plant instrument Installation
ƒæ Provided the witness for Instrument loop check verification
ƒæ Provide witness for Interlock function test verification
ƒæ Verification of the all Quality verification documents
ƒæ Plant start up activities.
ƒæ After start up did the instrument maintenance activities

2. AL-Bayroni Fertilizer & Petrochemical Company (SABIC) Kingdom of Saudi Arabia

Duration: From December 04, 2005 ~ April 20, 2006.

I did the following job responsibilities during the services of Al-Bayroni Fertilizer company
ƒæ Independently I handled the Instrument maintenance activities for Utility, Ammonia, Urea,2-EH (Diethyl Haxonal) Plant
ƒæ Doing the instrument maintenance and preventive maintenance activities.
ƒæ Preparing of the analyzer & instrument maintenance standard calibration procedure and Forms.
ƒæ During the shutdown Independently handled all vibration monitory system for more than 15 compressor
ƒæ Preparing the instrument standard maintenance forms and procedures
ƒæ Handled the breakdown and notification jobs
3. Sadaf Petrochemical Company (SABIC) Kingdom of Saudi Arabia ( shared with shell)
Duration: April 22, 2006 ~ till date
Recently I am doing the job in instrument analyzer department
ƒæ Doing the Preventive maintenance activities
ƒæ Doing the breakdown and notification job as per the demand of operation department
ƒæ Trouble shooting and diagnosing the fault.
ƒæ New installation commissioning and calibration of the instrument analyzers
ƒæ Did the modification for process online analyzers
ƒæ To check the job activities from the SAP(System Application Procedure) and maintainging the record in SAP
ƒæ Ordering and reordering the material thru SAP Software as per requirement of plants jobs

Position Held: Analyzer Tech.

4. United engineering Constructor ( Sole Vendor Of Yokogawa,Valtek,Klay,Kajani,Ashrocft & BTG Instruments)

Duration: From November 01, 2001 ~ April 04, 2004

ƒæ Independently handled the complete project erection commissioning of (CHEMI VISCO FIBER) Plant.
ƒæ Provide the services to clients and satisfied the customer requirement
ƒæ Hand on experience for sales of all kinds of field and control instruments for above all Manufacturers especially ¡* YOKOGAWA¡¨.
ƒæ Making the technical evaluation and proposal based on customer requirements
ƒæ Preparation of Quotation according to specifications of customer requirements.
ƒæ To satisfy the customer based on there technical requirements

Position Held: Assistant Instrument Engineer

Job Description

General Field Instrumentation

ƒæ Installation & commissioning of various type of transmitters, Magnetic flowmeters, Vortex Flowmeter, Pressure Switches, Control valves, Displacer Type level Transmitter Corioles Mass flowmeter, Ultrasonic type level and flow transmitters
ƒæ Installation, commissioning and calibration of various kind of control valves.
ƒæ I am confident of installation and calibration of machine monitoring system like vibration monitoring system of Bently Nevada 7200, 3300 and 3500 system.(axial, thrust and speed measurement).
ƒæ Worked on almost complete product of Yokogawa field instruments
ƒæ Complete overhauling and calibration of the Valtek Control valves and its accessories.
ƒæ Hand on experience of calibration of instruments for different manufacture like Yokogawa, Rosemount, Valtek, Honeywell,
ƒæ Testing Calibration, Servicing of various field instruments such as transmitters, Switches, Control Valves, etc.
ƒæ Worked on BTG and KAJAANI products related to PULP AND PAPER industries instrumentation

Instrument / Analyzer Technician
A brief summary about my experience is given below for your quick review:

ƒæ I have got though knowledge in the field of various types and different makes of on-line Analyzers
ƒæ Working experience in chemicals, Fertilizer and Petrochemical company
ƒæ Regular maintenance, trouble shooting, installation, preventive maintenance.
ƒæ Identifying the cause of problems using related logics diagrams
ƒæ Preparations of preventive maintenance schedules, developing standard operating procedures.
ƒæ Ordering and re-ordering necessary spares.

Analyzers Handled:
ƒæ Gas Chromatographs
ABB vista (3100) for H2, C3H8, C3H6 & CO.
ƒæ Infrared analyzers for CO, CO2 & CH4
Model URAS 14. Make H & B ( HARTMAN & BRAUN )
ƒæ Oxygen analyzers
Model Thermox WDG III & IV (Ametek )
ƒæ Paramagnetic oxygen analyzer
Model OXYNOS 100 Make Fisher Rosemount
ƒæ pH analyzer
1. Model No. PH400G, & PH402G YOKOGAWA)
2. Model No.54PH & 54 e PH ) Rosemount
ƒæ Conductivity analyzers
1. Model 54C, 54ec, 1054BC & SOLU) and 3081C remote type conductivity analyzer (Rosemount)
2. Model 871 series Make FOXBORO.
ƒæ SOX, NOX & CO analyzer
Continuous emission Monitoring Systems (CEMS)- Model ULTRAMATE 6E Make Siemens.
ƒæ CO analyzer
Model 3501 multi wave photometric detector. MAKE ABB
ƒæ Hydrogen analyzer
Model 7C, Make BECKMAN
ƒæ NH3 Gas detector
Model 6803330 Make DRAGGER.
ƒæ CO Analyzer
Model 6807306 Make DRAGGER & POLYTRON.
ƒæ LEL Detector & Control Monitor
1. System Model No. 610-N4X (Detcon-USA)
2. System Model No. 5300 Monitor (MSA)
ƒæ Chlorine Detector
1. Model: ULTIMA
2. Model: DC6-XX (Detcon)
ƒæ Oxygen & LEL Detector
Model: MSA 260 & (MSA)
ƒæ Hydrogen Analyzer
1. Model Caldos 5G (Hartmann & Braun)
2. Model Caldos 5 Advance optima (Hartmann & Braun)
Application: Chlorine
ƒæ GC Applied Automation Incorporated
Optichrom _ Advance chromatograph
Model No. 1731132224
ƒæ Trace Moisture Analyzer
1. Model No. 304 MCA (Ametek-USA)
2. Model No. 340 (Ametek-USA)
Application: Chlorine
ƒæ Moisture Analyzer
Series 1 (Panametric)
ƒæ Oxygen Analyzer (Paramagnetic)
Model: 1100 & 1900 (Servomex UK)

ƒæ pH Analyzer
1. Model No.PH 5081-P-HT (Rosemount)
2. Model No. TB82 (ABB)
3. Model TBI - Bailey
ƒæ Chlorine Analyzer (Liquid Analyzer)
Make: Teledyne
Application: EDC (Ethylene Dichloride)
ƒæ Trace Moisture Analyzer (Photometric
Model No. 514-0-20 (Teledyne)
Application: EDC Vent
ƒæ Trace Moisture Analyzer (IR)
Model: 3501 & 3401 Vista (ABB)
Application: Freon & Chlorine
ƒæ Ethylene Analyzer (IR)
Model: ULTRAMATE 5F (Seimenes)
ƒæ Density Analyzer
Model NO. SmartPro (OHMART-USA)
ƒæ Conductivity Analyzer (Remote Controlled)
Model No. F06-40864 (Rosemount)
ƒæ CO Analyzer NDIR With PLC Direct 205 Logic
Model: UTRAMATE 6 (Siemense)
PLC Model Direct 205 logic (Automation Direct KOYO)
Indicator Model: EZ-S6M-R(USA)
ƒæ Sodium Sulfite Analyzer
Model: Pump colorimeter Analyzer (HACH-USA)
ƒæ Dissolved Oxygen Analyzer
Model NO. 54e (Rosemount)
ƒæ TFC (Total Free Chlorine) Analyzer
Model No. 1054A (Rosemount)
ƒæ Hardness Analyzer (Ca+mg) Colorimeter
Model No. FPA800 Series (Titronic USA)
ƒæ Caustic Carbonate Analyzer Colorimeter
Model No. FPA300 Series (Titronic)
ƒæ Turbidity Analyzer with Moniturb Sensor
Make: Monitek (USA)
ƒæ Conductivity Analyzer TBI Bailey
Type TOROIDAL

Vibration Monitoring System

I am full confident of installation, Linearity Check and calibration of machine monitoring system
(Vibration monitoring system) of Bently Nevada 7200, 3300 and 3500 system.(axial, thrust and speed measurement).

Distributed control system

I have hand on experience of following related job of Hardware & software for Yokogawa DCS CS 3000 FIO System.
ƒæ Yokogawa Exa Quantum. Strong Knowledge about Exaquantum Historian and SER, used to collect history of running process
ƒæ OPC Server. Strong Knowledge about OPC Software that provides the communication between Yokogawa DCS and other OPC servers like Matricon OPC server or Bently Nevada.
ƒæ Hand of experience of software installation, software implementation, Fault diagnosis on both software and hardware. Modification, graphic designing, new loop assignments complete loop checking.

Triconex ESD System Model TS1131

ƒæ Complete knowledge about Designing of Logic, operating system of Triconex, Hardware assignment software implementation, I/O Assignment,

AMS (Fisher Rosemount)
ƒæ Hand on knowledge about Fisher Rosemount AMS software used for communication between AMS HART Protocol and all device of the field those having a option of HART Protocol using MUX devices

Programmable Logic Control Systems. Model: MELSEC FX1N (MITSUBISHI)

ƒæ Did The Complete Project of Auto Clave System On Habib Sugar Mills.
ƒæ Ladder logic designing, Graphic Designing with I/O's Assignment, Implementation of this project. Communication between PLC and GOT Terminal

Reference: On demand

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 10924)

Go to Search Parameters...

Brief Description

I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out