Resume - I am looking for a project or production engineering position.

Misco Jobs

Resume #5532

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

I am seeking a position in Production or Project Engineering.

ACHIEVEMENTS:

* Developed Auto Sketch drawings of site Utility & WTP distribution systems up to each unit's block limits. These Auto Sketch drawings were used later to develop or update the official distribution drawings on Micro Station.

* Developed computerized hydraulic models on PipeNet for all Utility & WTP site-piping systems.

* Accurately stated necessary expansions to site distribution systems for the inclusion of new and expanded units on site.

* I reviewed modifications to the site firewater system to ensure compliance with insurance carrier and NFPA guidelines.

* Developed plans and estimates for piping modifications and equipment necessary for a $12M Utility & WTP distribution system expansion. Expansion was necessary to support the installation of a new unit on site. System performed as required when complete.

* Became approver for modifications to Utility & WTP distribution system piping and drawings.

* Developed initial project plan for site energy reduction initiative using data collected by assigned team members. The site energy savings expected is $4M per year.

* Suggested modification to team reviewing boiler upgrades which resulted in $1.4M capital project savings in 2003.

* Suggested modification to site storm water team will result in savings of $3.6M when the project is installed in 2004 or 2005.

EXPERIENCE:

BASF 6/1/1990 to 3/31/2004
Technical Engineering Services (Utilities Plant/Water Treatment Plant)

Primary responsibilities as project engineer/manager include: operations support, analysis of projects affecting utility site systems, and capital projects.

Perform as team leader on capital projects from front-end development to successful closure. Projects performed as primary engineer range from $10,000 to $2,000,000. These projects include the installation of new air compressors, temporary boilers, generators, pumps, pipe racks, upgrades to compressor and boiler controls, continuous emission monitoring systems, modifications within WTP, and many header systems. I assisted as both operations and engineering support on a $52,000,000 Gas Turbine Cogeneration Plant installation.

Responsible for development of computer aided hydraulic models and primary contact for the Utility & WTP site distribution systems.

Trained as PSM Auditor in 1993 and have performed at least one internal audit per year since.

Programs used in performance of duties include: SAP R/3, Word, Excel, PowerPoint, Suretrac Project Manager 2.0, AutoDesk (Auto Sketch), Powerdraft, and PipNet

Texaco 1980-1985 (Oil/Water Separation Group)

In this position, my duties were two-fold. While in the research facility, I used varied analytical equipment for group research projects. Secondly, I traveled to field locations to solve various oil/water separation problems.

U. S. Army – 3 years active duty
Attended Primary Non-Commissioned Officers Course

EDUCATION:

New Mexico State University (NMSU) 1990
Las Cruces, New Mexico
Bachelors Of Science Chemical Engineering

ENMU-R
Roswell, New Mexico 1980
Associate of Applied Science Petroleum Production Technology

Attended the following courses presented by Global Power Generation Services for GE Power Systems in 1998.

Fundamentals of Gas Turbine Construction and Maintenance
Fundamentals of Gas Turbine Construction and Operation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 10014)

Go to Search Parameters...

Brief Description

A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.

Drilling Manager/Superintendent/Engineer with 14 years of international experience.

Project Management; General Management; Commercial Management; Project Director; Oil & Gas, Petrochemical; International; EPC/EPCM, Construction, Contracting, Joint Ventures; 30 years experience; Successful track record; Flexible and adaptable.

Operations Manager/Field Engineer - Borehole Seismic

Experience in project management, design, front end engineering, installation, testing and commissioning.

I offer demonstrated success in managing culinary and business operations activities at Defense Contracts, remote site and offshore locations in over eleven years of management for international catering companies.

I am an energetic, hardworking candidate. I am seeking an entry level opportunity.

Having, 21 years in Instrumentation Field, Maintenance, Project and Execution includes Oil and Gas and Power Plant Experience with Gulf Experience more than 7 years. Having good exposure to PLC and DCS, with Leading Role responsibility

Experienced and dedicated Land Acquisition specialist. Numerous major projects. Qualified and creditale references. Available soon. John Kellock

Obtain a position with a company that is a leader in the Drilling and Completion Fluid Markets of the Oil and Gas Industry. I offer my experience in product conception, presentations, extensive research and development skills

I'm a post graduate in M.Sc., engineering Phy & Instrumentation and having total 16 1/2 years hands-on experience on Control & Instrumentation systems (Maintenance and Projects ) being used mainly in Power plants /Steel /Pulp & Paper and Cement .

joined as shift driller and elevated to drilling superintendent. experienced in directional drilling. exposure in design, planning, drilling and completion of wells.

I graduated Texas A&M University '99 with a degree in Management, and now look to continue my career in Oil and Gas, either offshore or onshore and to dramatically increase my responsibilities and push my limits. Seeking a position as a Safety Coordinator or in Production or Operations.

General Manager - Latin American Based. International standards.

Over 20 years experience within the Oil & Gas, Power Generation, Construction and Marine industries including Owners Representative, Project Manager, Project Engineer, Senior Mechanical and Senior Process Engineer. I have worked for Developers, Operators, Consultants and EPC Contractors.

Have 22+ years of professional experience in carrying out all Operation related jobs in Gas Processing & Petrochemical units. These relate to both Commissioning & Startup. Also, well versed in Process modification / plant debottlenecking schemes.

Experienced B. Dev'l/Mgmt/Oprn candidate w/domestic and international background. Prepared budgets, forecast's, P & L's, BOD & Shareholders reports, overseen the successful startup of many Int'l BU's & Projects.

I have twenty years experience as an operational & developmental geologist. Currently involved with Barnett Shale development in the Fort Worth Basin. Desire and qualifications for both management and operational positions with the ability to generate prospects and revenue..

Qualified tradesman, Electrician 17 years Project Management Experince includes all trades Working on Syncrude UE-1 Project

Diverse, international, multidisciplinary technical and management background with primary focus on field development/exploitation, rig and subsurface operations, production surveillance and optimization, and cash flow management. Track record of continuous improvement in field exploitation.

Looking for a challenging career with a progressive company as an instrument & controls specialist to demonstrate international versatile experience and leadership capabilities in the field of instrumentation and controls.

Rotating Equipment, Maintenance Best Practices and Maintenance Excellence, Lean Manufacturing, GMP, "Toyoto Process", Asset Management, RAV, ROI, Audits, project management and Design Teams, Deming Trained.

Professional engineer,17 years, heavy & conventional oil, oil sands & gas. Expertise-hydraulic fracturing, well testing, reserve analysis, property evaluation, simulation, log analysis, workover & stimulation, water flooding, steam stimulation, SAGD, horizontal well. International. Multilingual.

Graduate in Petroleum Engineering.

SUMMARY OF QUALIFICATIONS AND ACTIVITIES 25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. HAZWOPER Certification

1. Graduate with POST Graduate diploma in Materials Management with more than 17 years experience 2. Presently working as Material Controller under computerised environment 3. Good knowledge of Windows 4. Certified Internal Auditor for ISO 9001:2000 QMS

Steam and Power Specialist

18-year experience in Procurement, Warehouse and Project Management, Construction Supervision and Supply Operation in Petroleum and Purchasing Services Industries. Also 6 years in SAP implementation projects working as functional consultant in Logistic and Material Management

I am looking for a project or production engineering position.

Twenty-four years experience in onshore and offshore oil and gas law, land management and land services, including titles, contracts, acquisitions and divestitures, due diligence, litigation support, legislative review, environmental and regulatory issues and management of land personnel.

Hydrocarbon Measurement Specialist/Expert (PE) 25 years experience Current Measurement and Allocation Advisor BP GoM Deepwater Experience E&P, Pipeline, Refining/Chemical Last 5 yrs concentrated on subsea systems, multiphase and wet gas measurement, process simulation and phase-behaviour models

A geologist with a strong technical background in reservoir analysis, geomodelling and IT. A broad range of work experience within major oil and service companies and consultancies over 8 years. Well developed communication skills to all levels of management and clients

Marine Engineer First Class Motor FG (Unlimited); Tanker Endorsement (Product/Crude) 23 years Marine Industry experience; Tradesman Fitter And Turner; Seeking a position as Chief Engineer on a DSV type vessel or as a Mechanical Supervisor /CSR in a related role on or off shore.

TAKING CARE OF REMOTE CAMP IN OIL RIGS

Former Schlumberger Senior Field Engineer, operations and maintenance in land and offshore. Maintenance eng. for camp and drilling rigs in the Peruvian jungle, By now I’m supervising the maintenance of 5500 instruments in a major copper / zinc.. I´d like to work Overseas.

A wide range of experience in the field of Petroleum Engineering: petroleum engineering instructor; sales and marketing of oilfield equipment; business development; tender preparation; management and project management skills; MS Office and MS Project; driving licence;

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

Twenty-six years in Offshore and Oil & Gas related engineering including FEED and TIE-IN work Twelve years Intergraph PDS (Equip. & Piping modelling Drawing Manager & Microstation). Including Isometric trouble shooting and PDS back-up support. ‘Optimeyes’ (Fluor Daniel CAD drafting system)

Over 25 years of diversified production and operations experience in the Northern Rockies with Majors and Independents. Unique background of field experience through petroleum engineering, operations, supt. positions and supervisory positions.

27 Years in Oil & Gas Procurement Industry. 15 years living / working in Saudi Arabia . B.S. in Business / Certified Purchasing Manager

Geologist, 17 years experience with major Oil Company in various international settings (Europe, Asia, Middle East and Africa) both as development- and exploration geologist. Analytical and flexible. Swiss national.

I am a QHSE individual but can crossover to other areas. The resume covers my international experience and gives information on my skills.

23 years experience in construction and project management professional with expertise in all facets of offshore oil and gas projects, pipelines, refinery and petro-chemical plant. Successful completion with various owners such as SHELL,TEXACO,UNION OIL, EXXON, ONGC, PEMEX, PETROBRAS

Dear Sir, I am applying for drilling personnel in the Philippines. I am a Filipino electrical engineer temporarily working in the USA. My permit will expire soon and I will go back to the Philippines. I once worked as assistant oil drilling engineer in the Arabian American Oil company.

Senior Petroleum Engineer with 17 plus years experience in field development and oil field operation. Experience also include work-over, well test analysis, well stimulation, artificial lift, waterflooding, cased hole logging interpretation.

Physically fit and mentally active person possessing considerable qualifications and experience gained with international companies on and offshore in industries such as oil & gas, gas compression, power generation, open cast quarry, and large-scale construction.

Diverse knowledge/broad engineering and management experience - 26 year employment career. Employed by highly-respected companies with skilled professionals, supervisors and co-workers that provided excellent training and insight.

Profile Motivated, reliable and adaptable professional with extensive experience in management, quality assurance, engineering metallurgy, government service, academe and ISO management systems

SUMMARY: Experienced Safety, Health, Emergency Response professional with working knowledge of Process Safety Management, Ergonomics, Behaviour Based Safety, Regulatory Standards, and many other related areas.

Expert Mediator and Problem-Solver

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out