CONTACT INFORMATION:
View contact information...
Experience – SHELL, BP, BOTAS, SAUDI ARAMCO, ADNOC, KOC & KNPC
Offshore Certificate BOSEIT/HUET valid till 2008
To The Manager / Director
Subject: Application for the Post of "Senior Electrical Engineer- Project /construction,
ProComm & Comm. / Quality Control–Inspection and O&M"
I have 20 years of Experiences as Project management, direct supervision of Feed-detail design engineering, construction / installation, Quality Control-Inspection, testing, Pre-commissioning & Commissioning, operation and maintenance projects for the UPSTREAM OFFSHORE and DOWN STREAM ONSHORE facilities.
Well aware of scope of work, code, standards and specification for Designing Project, preparing the SOW, MTO and specification for equipments used in Oil & Gas Refineries, Petrochemical, pipeline- Hydro carbon industries and commercial facilities. With through knowledge of SAUDI ARAMCO, ADNOC, KOC, KNPC, BS, ISI, IES, IEEE, IEC, NEMA, NETA, ANSI, NEC, NFPA 70, API RP-500 standards and rule & regulations of industrial safety prevention for classified-hazardous and unclassified areas. As EPC project engineer / inspection dealing with client, consultant, vendors, contractors and subcontractors.
Worked with Instrumentation- Scada system, F & G system, building Security system, CCTV system, Pagging system and Telecommunication system.
Work Experiences as follows-
1) Power Plant Projects- Thermal, Steam and Hydro
2) Refinery-Projects - Fup, FCC, Hcr, Vr, Hsr, Rmp, Hp, Pbsr, Plph, Gas Trains /Plant
Agrp, Shulpher, Mtbe, Alkaletion, SAR, Merox, LPG, CDU and Oil Piers loading.
3) Oil wells and Processing plants.
4) Petrochemical Projects-Ldpe, LLdpe, Pp, Ethylene, Polyethylene, Eocene, Olefin.
5) Desalination plant - refineries and Communities.
6) Pipe line projects - Oil & Gas
7) Offshore plate forms-Topside Water injection, Gas compression, Glycol, production.
8) Offshore gathering stations, power distribution platforms and well jacket expansion for Electrical submersible pump installation.
Project Management
* Definition (Pre-feasibility and feasibility study)
* Conceptual studies
* Feed and EPC -Detailed Design Review
* Planning and Scheduling
* Project Implementation
Procurement and Supplier Management
* Review and approval of material specification system, HV/LV-SWGR, MCC, TXFR, MOTOR, LTG, GRDG.LTNG, DEG
* Supplier selection, call for tenders
* Vendor management and Review
* Contract negotiation
Construction with EPC Contractors.
Manage and quality assurance experience to construction plans. Construction services integrate experience, expertise of oil, gas and infrastructure
* Safety management
* Site management and logistics
* Construction design
* Quality management QAQC.
* Test and validation
* Environmental monitoring and management
ProComm & Commissioning & Control Systems
* Calibration Testing of relays, Swgr, Mcc, Txformer, motors, lighting, grounding,
* Complete testing solutions for power, systems
* RAMS analysis (Reliability, availability, maintenance and safety)
* Start of operations Maintenance, installation, planning and commissioning of control systems, including the testing of hardware, software and control networks.
* Distributed Control Systems
* Process Safety Systems
* Control Systems Integration
* Petroleum Industry Applications.
Operation & Maintenance
Maintenance is essential for process infrastructure and in general for oil and gas infrastructure projects. Integrated management maintenance system, which covers:
* Maintenance of all electronics access control systems
* Preventative maintenance programs for electrical installations
* Inspection, calibration and maintenance services for technical and safety alarm systems
* Root cause analysis
* Equipment maintenance for compressors, electrical motors, production lines, generating sets
* Following of applicable quality standards
Other areas of expertise:
* Site Planning and permits
* SCADA systems
* Inspection Services
Safety Courses carried out.
* Sea survival courses and travel by boat and helicopter BOSIET/HUET OPITO Approved.
* PTW system with major oil companies
* HSE courses
* H2S courses
* STRESS Analysis
* Basic safety induction training
* Chlorine safety courses
* First aid courses.
Punch listing, Handing over procedures, maintenance of various Electrical equipment's & operations, working as per Daily, Weekly, Quarterly, Half yearly and Tri-yearly CMMS planning schedules. I have carried out different types of maintenance like Corrective, Preventive and Project maintenance in Substation and Plant's.
Thanking you,
Yours faithfully
Experiences in India
In International companies MICHAEL J. SAMUEL
NHPC-ABB, DSB, ONGC-NKK Emerald Society Wing C-62
I P C L- CHIYODA CORPN. Mhasoba Maidan KALYAN (W)
MUMBAI 421301, India
CURRICULUM VITAE
Name: MICHAEL JOSEPH SAMUEL
Date of birth/Place: 10 Feb 1963 / Bombay India.
Passport details: Passport no. – Z-1320427
Date of Issue & Expire: 3/1/2007 & 2/1/2017
Place of Issue: TRIPOLI-Libya
Driving license: Kuwait & Indian
Tech.Qualification: B. E. (ELECTRICAL ENGINEERING.) 1986
Computer skill: Diploma in Computer science.
: Software calculation basic -ETAP
Reference Will be provided
1) Worked with Waha oil Company -Libya from September 2006 to till February 2007 as "Snr. Electrical engineer".
2) Worked in KHAJI JOINT OPERATION (KJO)/DAR PMS project core engineering team as "Senior Electrical Engineer" from Jan 06 to August 2006.
Nature of duty and responsibilities-
Carried out the various ON SHORE and OFFSHORE PROJECTS for KJO-AL KHAFJI JOINT OPERATION (ARAMCO GULF OPERATION / KUWAIT GULF OIL COMPANY) as per the Codes, standards and specifications for SAUDI ARAMCO & other international standard applicable, the details job descriptions as shown in the Cover pages 1 and 2.
3) Worked in Brunei shell Petroleum in Brunei as "Snr. electrical engineer / Inspection" From October 05 till Jan06.
Nature of duty and responsibilities-
Asset Integrity management system in Offshore / Onshore installation, review the design, certify & Verification of Explosion proof E & I equipments in Hydrocarbon installation in zones 0, 1 & 2.
4) Worked in BOTAS pipe line corporation cross country Turkey section BTC Baku-Tbilisi-Ceyhan projects for M/s British petroleum (BP) as "Senior Electrical engineer / Precomm-comm." from March 05 till October 05
Nature of duty and responsibilities-
Quality control Inspection, pre-commissioning and commissioning of EHT Over head line power supply to Pump stations, Block valve stations, UPS, BTCH, Cathodic protection for the Pipe lines and under ground container LER.
5) Worked with M/s British petroleum (BP) for M/s AMEC/TEKFEN/AZFEN CWP TOPSIDE Offshore Plate form Water and Gas compression projects the Azerbaijan worked as "Senior Electrical and Inst completion engineer Incharge" From Oct 04 Till Feb 2005
Nature of duty and responsibilities-
Inspection, pre-commissioning and commissioning E & I activities and completion management system for the each individual system packages.
6) Worked with M/s SAUDI PETROCHEMICAL COMPANY (SAUDI SHELL) for short period as "Senior Electrical engineer / Inspection"
Nature of duty and responsibilities-
Carry out the details engineering design review, issue the comments for the design implement and Quality control for the electrical equipments, installation, testing, precommissioning and commissioning.
7) Worked in SAUDI ARAMCO as "Senior Electrical Project & inspection Engineer". In Technical Support Unit as Grade-14 Engineer-1, from 4/1/2002 to May 2004, In RABIGH REFINERY- POWER PLANTs DESALNATION, COMMUNITY and PROCESS PLANT Areas Substations.
Nature of duty and responsibilities-
Engineering & Design works and project utility, transmission, distribution planning, construction, QA/QC-Inspection, Evaluating existing and new Substations as per Code, Standard and Specification for HT/LT 480V through 110KV SWGRs, and MCCs, Developing corporate strategies and master plans for electrical systems and power generation. Dealing with professional consultant in planning and executing engineering studies, applying and analyzing system.
Conduct feasibility studies and Reviews on major projects upgrades electrical distribution, generation, and emergency backup facilities. Coordinate initial power supply agreements and increments with Utilities. Prepare scooping papers to define capital projects covering electrical systems facilities. Interface with Power Distribution Department, consultant engineering division, other department and operating Organizations.
Review and evaluations of electrical systems as performed by others and prepare presentations to Corporate Management on control system issues. Full-time advisor-consultant to SAUDI ARAMCO management and other organizations operation / Maintenance and Training to Saudi young engineers.
8) Worked with M/s UTS KENT / BECHTEL LINDE At Borouge Petrochemical Projects (Ethylene/Poly Ethylene-Olefin) Utilities and Offsite – Ruwais, Abudhabi as "Electrical Field Engr., Quality Control, Testing, Precomm. & Comm. Engr." from MAY.2000 to DECEMBER 2001.
Nature of duty and responsibilities-
Carried out Quality Control, Testing, Precommissioning and Commissioning of HT/LT Switchgears, Transformers, UPS, BTCH, Batteries, Grounding, IR Testing of Cables testing Power control & hipot, EOT and Goods lift Cranes, cathodic Protection for Tank & pipe, protection relays testing using Primary and Secondary injections kit, Trouble shooting, Communication system-cctv, Security and Telephone system, Mechanical completion electrical system Package- inspection, Testing and Electrical Maintenance works. Work carried out close Coordination with the Clients, Consultants, Vender's, Subcontractors and dealing, discussion and attending the meetings for day today activities.
9) Worked with "M/s DAELIM ENGG. &CONSTRUCTORS CO" for KOC-Kuwait Oil Co.
New Gathering Centre GC-25. Consultant M/s PARSON Engineers worked as "Electrical Engineer & Quality Control Engr" since August 1999 to end of the Feb.2000.
Nature of duty and responsibilities-
Carried out QC & site execution of Fire& Gas detection, Grounding, Lighting, Cables (Ht/Lt), power, control, signal & termination, Cctv, Switchgear (Ht/Lt), Grounding, Heat tracing cable, Cable tray works, all the works in plant areas, Substation, control building, Tank, Flare area, shelters & Punch lists and coordination with other department to solve the plant construction works.
10) Worked with "M/s SUNKYONG ENGG&CONST.CO", consultant - MPD KNPC in their
Acid Gas Recovering Projects, Gas trains and Revamping with Kuwait national
Petroleum co. at Mina Al ahmadi refinery (Gas plant trains shut down & New boiler) as
"Site Engineer and Quality Control Engineer". Since April 1998 till 20 July 1999.
Nature of duty and responsibilities-
Direct Supervision of under ground activities cables trenches for instruments, electrical cables (HT / LT), Substations, Lighting for control room'substation, residential, commercial buildings, Groundings, cables termination in Substation, Motors, Transformers, Cathodic protection for Tanks and Pipes, Protection relays testing, primary and secondary injection test, Commissioning works. In electrical material on site. Installation of new substations and co-ordinate with vendors', consultant, client for execution of works on site as per I.T.P.
11) Employed with "M/s MITSUI ENGG. SHIPBLDG.CO" in their MTBE - ALKLATION -FCC- REVAMPING PROJECT (MAFP) with Kuwait national petroleum co. at Mina-
Al-Ahmadi refinery, consultant M/s Stone & Webster as "Field Engineer and Quality Control Engineer from June1996 till 31DEC 1997.
Nature of duty and responsibilities-
Close co-ordinate with client, consultant, subcontractors & vendors and site supervision and QC of electrical installation in plants and in S/S, HT/LT switch gears, MCCs, Motors, Transformers, Cathodic protection for tanks and pipes, Protection relays testing, primary and secondary injection, Precommissioning, Commissioning and Inspection of design as per site condition with co-ordination from consultant and client. Day to day coordinate with KNPC O/P-MAINT. For the Revamping shud-down activities and common/off site plant extension works all over refineries.
12) Employed with "M/s KENTZ OVERSEAS LTD" for Kuwait national petroleum co, at
Mina Al ahamadi Refinery for Operation & maintenance of electrical systems. During this time the areas that were covered by me FUP, FCC, HCR, VR, HSR, HP, RMP, PBSR and PLPH, Worked as "Snr. Electrical Supervisor" since July 1993 to April 1996.
Nature of duty and responsibilities-
Besides doing operation and maintenance I also did trouble shooting of 11KV, 3.3KV, 440v switchgears MCCs, DEGs, Motors, Transformers, UPS, BTCH, BATTERYS, Ltgs, Groundings, fire alarms & Halon system for plants, Substations and Tankage areas. Maintenance executed as per CMMS work orders and day to day trouble shooting as well as construction and modification required by KNPC in the PLANT and minor and major shut down activities.
13) Worked with "M/s. MANNESMANN-SAUDI ARAMCO" consultant M/s BROWN ROOT (GLOBAL) contract in Yanbu crude increasing east-west pipe line project of Booster pump station as "Electrical Supervisor-Engineer / Quality Control Inspector." Since July 1991 to April 1993.
Nature of duty and responsibilities-
Site supervision of HT & LT Electrical installation of switch gears 11kv,4.16 kv and 480 volt, MCCs, PCCs Lighting, Distribution panels, UPS, BTCHs battery banks, Groundings, Fire alarms, Halon systems, Paging systems & Testing & Pre-commissioning works. I have done laying & termination of power, control signal cables, Telephones PABX in control rooms, control vans. Revamping Expansion & modernization of old centrifugal gas turbine trains CGT retrofit & RB-211 part of my work and cathodic protection.
14) Worked with "M/s URI CIVIL CONTRACTOR AB" (Skenska-ABB-Sweden co.) in Kashmir India. Worked as "Electrical Engineer" for a powerhouse on short term from Jan 91 till June 91
Nature of duty and responsibilities-
Over all maintenance and of General sets, Tunnel Boring machine, cable laying and termination's work shop equipment's, New colony building, Lighting works
15) In Kashmir worked with "M/s DUMEZ SOGEA BORIE" a French company in a Hydro electric project on a 5 month contract basis from Sept 90 till Jan 91 as an "Electrical Supervisor."
Nature of duty and responsibilities-
Over all maintenance and installation of portable substations, Tunnel equipment's, cable laying and termination. Work shop equipment's and day to day trouble shooting, In charge for two tunnel nos T-301 & T-307.
16) Worked as "Electrical Engineer" for "M/s NKK CORPORATION" Japanese company in their LNG & PROCESS PROJECT with ONGC Bombay, consultant M/s ENGINEER INDIA LTD (EIL) from 2 Jan 1990 till 31 Aug 1990.
Nature of duty and responsibilities-
Carried testing & Pre-commissioning of 11KV, 6.6KV, 440HTs/LTs switch gears, MCCs, PCCs, Transformers, Motors, Lightings, Distribution panels, UPS, Battery bank, Fire alarms & Halon systems, Protection relay primary & Secondary injection testing, Paging & Telephone PABX System, Cable laying & Termination, Checking the drawing, Modification & as building punch list and hand over procedure of project.
17) Worked with "M/s CHIYODA CORPORATION" contract CAPTIVE POWER PLANT PROJECT for IPCL-Nagothane (Bombay) as "Electrical Engineer," consultant M/s EIL since 27 Sep. 1987 to 31 Dec. 1989.
Nature of duty and responsibilities-
During the site construction, supervision & QC of installation & testing of HT, LT switch gears, PCCs, MCCs, Transformers, Earthings, conduiting, Cables laying, Cable trays, Lighting distribution, Uninterrupted Power Supply battery's, BTCHs, Gas Turbine Generators, Steam Turbine Generators, Load shedding, DEGs, Crane EOT, Pagging systems, Fire alarm & Halon system, Cable termination, Punch lists, Project hand over procedure.
View contact information... |