Resume - I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the las...

Misco Jobs

Resume #5595

CONTACT INFORMATION:
View contact information...

Career History

August 2000 to present: Subsurface Team Leader for the Amherstia gas field, the largest in Trinidad and the largest operated by BP. Facilitated the introduction of high gas rate completions with 7" tubing and horizontal gravel pack completions. Developed the concept of gassy oil wells to develop thin oil rim at economic rate. Project Managed the Parang satellite development and introduced extended reach drilling to BP's Trinidad operations. Developed and coached young engineers and geoscientists.

August 1998 to July 2000: Production Team Leader for the Schiehallion FPSO (Floating Production, Storage and Offloading Vessel). Ensured maximum production rates while meeting subsurface data requirements, commissioning, maintenance, environmental and integrity needs for both vessel and subsea installation.

March 1996 to July 1998: BP Operations Advisor (BP Representative) on the Petrojarl Foinaven. As BP representative offshore I ensured that the Norweigen operator (Golar Nor) commissioned and operated the vessel safely, without harming the environment, while maximising production.

April 1994 to March 1996: Senior Petroleum Engineer on the Foinaven field, the first field West of Shetland, responsible for well completion design and installation. Additional responsibilities included planning for future well management. These objectives were achieved by creating and then leading an Alliance of BP and contractor employees.

March 1993 to March 1994: Production Technologist in Aberdeen, responsible for Clyde, a difficult field with high temperatures, sour service conditions, corrosion, scale and asphaltenes. Designed completions, supervised trainee on gas lift design and troubleshooting, etc..

January 1989 to February 1993: Petroleum Engineer in Completion Technology, Sunbury; a multidisciplinary team providing technical support to BP's operating centres. Work included research on perforating and well performance predictions. Acting as an internal consultant I also completed formation damage and acidization studies on particular fields. Horizontal well studies included review of BPs experience in Alaska & North Sea. Training courses, posters etc. for advancing technology within BP were developed.

August 1987 to January 1989: Reservoir Engineer for West Sole gas field, Southern North Sea. While in this position I created and history matched a new simulation model of the West Sole field. This included a review of PVT properties, lift curves and formation properties. In addition I made recommendations on infill drilling, facilities debottlenecking and other means of enhancing productivity.

February 1985 to August 1987: Petroleum Engineer in Production Technology Group in Calgary, Canada. In this position I designed, evaluated and, when required, supervised acid jobs, fracturing treatments, cement squeezes and other completion and workover operations. I also sized electrical submersible and rod pumps and investigated artificial lift problems.

August 1984 to February 1985: Reservoir Engineer on Magnus oilfield, North Sea. Created cross sectional simulation models and developed pseudo relative permeability curves for a new full field model.

October 1982 to August 1984: Petroleum Engineer in Production Technology group working on North sea fields. Based on vertical multiphase flow calculations I provided "lift curves" to reservoir engineers and designed artificial lift installations (electrical submersible pumps and gas lift). In addition I provided conceptual completion schemes for new field developments.

October 1981 to October 1982: Trainee Petroleum Engineer, Southern North Sea gasfields. I supervised wireline work, monitored pressure and production data and provided general engineering support in an operations post.

Education

Ph.D. in Petroleum Engineering on the subject of scale formation in oilfields, Heriot-Watt University.
B.A.Hons degree in Geology, Oxford University
"A" levels in Mathematics, Physics and Chemistry, 9 "O" levels.
Chartered Engineer with the Institute of Mining and Metallurgy, Registrant Number 510511

Papers published

"Action taken to increase run-life of electrical submersible pumps in the South Sturgeon Lake D-3" by J.Pucknell, Journal of Canadian Petroleum Technology, Sept-Oct 1988

"Calculation of total skin factors" by J.K.Pucknell and P.J.Clifford, SPE paper 23100, September 1991

"Measurement of additional skin resulting from perforation damage" by L.A.Behrmann, J.K.Pucknell, S.R.Bishop and T.-Y.Hsia, SPE paper 22809, October 1991

"An investigation of the damaged zone created by perforating" by J.K.Pucknell and L.A.Behrmann, SPE paper 22811, October 1991

"Effects of underbalance and effective stress on perforation damage in weak sandstone, initial results" by L.A.Behrmann, J.K.Pucknell and S.R.Bishop, SPE paper 24770, October 1992

"Predicting the pressure drop in a cased hole gravel pack completion" by J.K.Pucknell and J.N.E.Mason, SPE paper 24984, October 1992

"An evaluation of recent "mechanistic" models of multiphase flow for predicting pressure drops in oil and gas wells" by J.K.Pucknell, J.N.E.Mason and E.G.Vervest, SPE paper 26682, September 1993

"An evaluation of horizontal and high-angle wells drilled in Prudhoe Bay after five years of production" by J.K.Pucknell and W.H.Broman, JPT February 1994

"Solving Gas Lift Problems in the North Sea's Clyde field" by J.K.Pucknell, S.Goodbrand and A.S.Green, SPE paper 28915, 1994

"Producing Trinidad Solids Free: A Retrospective Sand Control Completion Study" K.D. Krieger and J.K. Pucknell, SPE paper 81053, 2003

"Amherstia Field, Trinidad: Breaking Barriers in the New Millennium" by John Pucknell, Glen Holder and Tony Seesahai, SPE paper 81012, 2003

Personal details

Date of birth: 22 February 1957
Nationality: British
Marital Status: Married, no children. Wife is a Veterinary Nurse.

Interests

Travel, walking.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 10806)

Go to Search Parameters...

Brief Description

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

I am a B.Sc Chemistry degree holder and have totally 24 years of very good experience in PROCESS FIELD / PANEL operations in oil/gas treatment plant. This is one of the biggest oil processing plant in India. SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LTD., (SPIC).

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private/public sector contract, program/project mgmt. Domestic & international E&P and technology development with major/independent/service companies. Identified significant oil/gas reserves through innovative mgmt. of multidiscipline teams.

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream

I graduated from Sultan Ageng Tirtayasa University, in Indonesia on October 2004, majoring Chemical Engineering Degree. I have experienced working in petrochemical plant. During 10th years I have ever been worked at PT. Asahimas Chemical Indonesia ( VCM/EDC Plant ) from 1997-2007

City and Guilds Motor Mechanical Technician Diploma and full tech certificate. Languages: English, Arabic and French Spoken fluently

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Trained Radiation Protection Officer & Health Physicist from India

I have sailed as Master on Tankers and have good experience in Oil / Chemical / Gas Tankers.

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

I am a dedicated, performance and goal oriented multi-tasker who will do whatever is necessary to help the company reach its maximum potential.

Applying for the post of HSE CO-Ordinator

Assist sales team in all technical challenges while meeting with clients, check & modify well plans,calculate Torque & Drag, drill string & BHA assembly,hydraulics,• Managed and maintained up to 45 jobs in Southern Manitoba, Southern Saskatchewan, all of Alberta and Northern British Columbia.

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.

Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Proect control enginner cost control and senior planner for EPC projects

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out