Resume - Mechanical Engineer - Rotating Machinery & Packages

Misco Jobs

Resume #56007

CONTACT INFORMATION:
View contact information...

SUMMARY OF EXPERIENCE

I have a good cross sectional background and 10 years experience in mechanical and heat transfer engineering within the oil and gas industry on all aspects of rotating machinery and packages.

This includes working for both the client and main contractors from the design concept through to the commissioning phase for platforms, LNG plants and FPSO's in Europe, Middle East, Russia, West Africa and Asia. Key hands-on experience relates to power generation, gas compression, water & gas treatment, waste heat recovery/steam production, electro-hydraulic powered systems, high pressure pumping, flares, drilling equipment and lifting appliances.

I am also fully conversant with all international industry standards, codes and recommended practices required for specification, selection, design approval, witness testing, inspection, preservation, installation, commissioning, start-up, maintenance and technical services.

CAREER SUMMARY

July 2007 to date
BP/ADMA OPCO - Senior Mechanical Engineer - Malaysia and South Korea

Umm Shaif Gas Injection Facilities - Abu Dhabi, U.A.E.
Compression Platform CP-1 (600 MMscf/d, 13 000 T), Collector Separator Platform CSP-1 (1 000 MMscf/d, 305 mbd oil, 7 000 T), Utilities and Accommodation Platform (7 000 T)
- Detailed engineering in Ranhill Worley Parsons offices, Kuala Lumpur
- Construction and commissioning in Hyundai Heavy Industries shipyard, Ulsan

* Verify engineering procedures, specifications and standards
* Check the basis of design, equipment and packages specifications, data sheets, requisitions and technical bid evaluations
* Provide recommendations on the equipment selection to meet project requirements
* Review vendor proposal, documentation and drawings and ensure compliance
* Participate in project, client and vendor meetings (Kick Off, design review, HAZOP)
* Attend Factory Acceptance Test at Vendor premises
* Support construction site and supervise completions and commissioning activities
* Prepare and manage punch lists till closure

-Fuel gas conditioning (scrubber, coalescers, superheaters, 25 MMscfd, 90 bar)
-Produced water treatment (hydrocyclones & degassers, 850 m3/h)
-4 Air compressors (screw, 1 000~2 000 Nm3/h) and heatless dryers
-3 Acid gas flares (750~1150 t/h)
-3 Gantry cranes (5~15 T), Seawater pumps intake strainers retrieval system
-6 Submersible jockey & service seawater lift pumps (60m3/h, 19 bar)
-2 Nitrogen generation packages (membranes, 350 Nm3/h)
-2 Electro-chlorination packages (up to 12 kg/h)
-6 Chemical injection units (diaphragm pumps, up to 360 bar)
-10 Autobackwash strainers (up to 3900 m3/h), GRP & steel tanks

May 2006 to Jun 2007
RasGas (ExxonMobil/Qatar Petroleum) - Package Equipment Engineer - Qatar

RGX2 Onshore LNG Expansion - Trains 6 & 7 - 7.8 MTA LNG - Ras Laffan - Qatar
Chiyoda Technip JV - Japan/France/Abu Dhabi

* Review EPC contractor and Vendors documents (Equipment data sheets, Purchase requisitions, Engineering studies, Construction drawings, Inspection and test plans, P&ID's, field installation procedures) to ensure compliance with job specifications and verify safe and operable packages features
* Participate in Lessons learnt, PID, HAZOP, SIL and 3D model reviews
* Monitor equipment follow-up visits and witness testing at Vendors shops, participate with EPC contractor in resolution of equipment testing problems
* Provide input to Control Management of Change and Risk Management activities

-4 gas turbine Heat Recovery Steam Generators with sup. firing (220 t/h, 41 bar)
-3 Steam Boilers with NOx reduction (240 t/h, 41 bar)
-3 Desalination units (multiple-effect distillation with thermocompression, 90 t/h)
-Nitrogen generation (7000 Nm3/h), liquefaction (500 m3/h) & cryogenic storage
-Sludge handling (60 m3/h, flocculation, coagulation, decantation, centrifugation)
-Caustic scrubber (700 Nm3/h), HCl acid scrubber (20 Nm3/h)
-Water treatment (m3/h): well injection (250), polishing (190), remineralisation (4)
-Gas flares (t/h) with steam injection: dry (2200), wet (1900), acid (260)
-Compressed air dryers (10 000 Nm3/h)
-Chemical injection units (20 off: anti-emulsion, methanol, caustic, HCl acid...)

Jan 2005 to Dec 2005
Amec - Mechanical Technical Specialist - South Korea

Shell Sakhalin 2 Lunskoye LUN-A (23 000 T, 16 000 bpd, 1 800 MMscf/d) and Piltun Astokhskoye PA-B (28 000 T, 70 000 bpd, 100 MMscf/d with NGL recovery) drilling & production rigs in ice-infested waters - Sakhalin Island - East Siberia - Russia in Samsung Heavy Industries shipyard, Gyungnam

Russian "General Designer" & Field engineering for mechanical, drilling and safety; topside
Inspection, follow-up and acceptance of mechanical completion work, resolution and approval of field engineering changes and site queries, verification and settling of outstanding punch points and FAT works, monitoring of preservation & disconnections.

Feb 2004 to Nov 2004
Amec Fluor Daniel JV - Mechanical Commissioning Engineer - South Korea

ExxonMobil Kizomba B FPSO (2.2 million barrels, 250 000 bpd, ultra deep-water) - Angola
10 months in Hyundai Heavy Industries shipyard, Ulsan

Same responsibilities as in Kizomba A FPSO development. In addition:

-3 gas turbine Waste Heat Recovery Units (23 MW) & heating medium loop
-2 inert gas generators (10 000 Nm3/h), distribution & venting systems
-1 helicopter refuelling system (14 m3/h)
-mechanical workshop equipment

Jan 2003 to Jan 2004
Amec Fluor Daniel JV - Mechanical Commissioning Engineer - South Korea

ExxonMobil Kizomba A FPSO (2.2 million barrels, 250 000 bpd, ultra deep-water) - Angola
13 months in Hyundai Heavy Industries shipyard, Ulsan

Summary of responsibilities for topside modules:
* Preparation of procedures for onshore & offshore phases from start to finish
* Implementation in the electronic project completion tracking system (WinPCS)
* Development of mechanical completion, pre-commissioning, commissioning step by step & preservation procedures; coordination & field assistance to all parties:

-2 HP centrifugal turbo-compressors (30 MW) & ancillaries (scrubbers, coolers)
-1 LP/IP centrifugal moto-compressor (5.6 MW) & ancillaries (scrubbers, coolers)
-3 electro-hydraulic lattice boom cranes (34 T @ 58 m, 10 T @ 73 m)
-living quarter sanitary waste system (140 p.)

Jun 1999 to Dec 2002
Doris Engineering - Mechanical Engineer - France, the Netherlands and South Korea

Summary of responsibilities on offshore projects:
* Preparation of engineering specifications for rotating process equipment, machinery and packages on the basis of process specifications
* Preparation of the technical part of the inquiry and purchase requisitions
* Evaluation of the manufacturer proposals
* Vendor data review/engineering follow up
* Participation in final acceptance tests carried out in manufacturer workshop
* Preservation, maintenance, spare parts and punch points management
* Field supervision during erection, commissioning and start-up of equipment

Oct 2000-Dec 2002
TotalFinaElf - Amenam/Kpono Unity FSO (2.2 million barrels, 230 000 bpd) - Nigeria

First successful attempt in the world to build a very large vessel-type offshore structure with hull blocks & topside modules on land, rather than in a dry dock.

As only Client mechanical supervisor, basic engineering:
4 months in IHC Gusto Engineering offices, Schiedam - the Netherlands detailed engineering, construction (hull & topside) and onshore commissioning:
21 months in Hyundai Heavy Industries shipyard, Ulsan - South Korea

-3 turbo-generator sets (5.25 MW)
-2 hydraulic cargo pumping systems (3.5 MW)
-2 emergency diesel generator sets (1.5 / 1.8 MWe)
-2 containerised hydraulic and mechanical firewater pumps sets (1000 m3/h)
-1 offloading centrifugal booster pump (7200 m3/h)
-2 pressurised hot water boilers (12 MW)
-2 inert gas generators (10 000 Nm3/h)
-2 box boom electro-hydraulic cranes (18 T @ 30 m)
-marine handling appliances (200T quick release hook, 50T & 15T winches)

Jul-Sept 2000
TotalFinaElf - Peciko 2 - wellhead platform - Indonesia

Basic engineering; topside
Development of specifications, purchase requisitions and data sheets for:

-1 diesel-hydraulic crane (15 T @ 25 m)
-several auxiliary gas driven injection pumps

Feb-Jun 2000
TotalFinaElf - Tunu 8 - gas compression rig - Kalimantan swamps area - Indonesia

Detailed engineering; topside
Development, review and "for purchase" release of specifications and data sheets of:

-2 MP turbo-compressors (26 MW)

Basic engineering; topside. Development of mechanical specifications and data sheets, preparation of handling studies for:

-2 turbo-generators (5 MW)
-1 emergency diesel generator set (800 kWe)
-10 vertical canister pumps

Jan-May 2000
TotalFinaElf - Erika shuttle tanker wreck - cargo recovery - offshore Brittany - France

Conceptual design, basic and detailed engineering; topside & sub-sea
Carried out screening studies, reliability analysis, complete design definition and shop tests in France, Germany and Norway in readiness to handover to client:

-2 sub-sea hydraulically driven twin screw pump sets (50 m3/h)
-2 hydraulic power units (75 kW)
-2 spiral heat exchangers (4 MW)

Jun-Dec 1999
Veba Oel - F02a Hanz Field - production rig (10 000 T) - North Sea (Dutch sector)

Detailed engineering; topside
Development of mechanical specifications and data sheets, approval of Vendor documents, amendment to purchase requisitions of Long Lead Items for:

-1 diesel driven firewater pump (1000 m3/h)
-1 electric motor driven firewater pump (1000 m3/h)
-1 electrochlorinator package (5 kg/h)

Nov 1998-Feb 1999
Selas S.A. - Site Engineer - Linz, Austria

Commissioning of blowers, pumps and heat exchangers for a jet cooled continuous annealing line of VoestAlpine AG. Updating of P&ID's to "as built".

COMPUTER KNOWLEDGE

Proficient in:
* Microsoft Office, Adobe Acrobat,
* Data management software (CDMS, X-Net, ShareCat, ProArc, DmNet),
* Project completion certification tools (WinPCS, Thule),
* 2D/3D drafting (AutoCad, PDMS, PDS, Visio)

LANGUAGES

* French: mother tongue
* English: fluent

OTHER INFORMATION

* Trained in First Aid and Defensive Driving (2005)
* Clean driving licence (1992)

REFERENCES AND RECOMMENDATIONS

* Selection of references and recommendations available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 10902)

Go to Search Parameters...

Brief Description

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

I am senior Information management engineer with 12 years experience in the Petroleum and IT industries. I have a Bachelor of Mathematic / Information technology

I have been working as an executive engineer(inspection) in chittagong urea fertilizer ltd. since 2nd april,1997 to till date.I have to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc to ensure plant integrity &reliability .

Senior HSE advisor

Electrical Engineer, Planner

cartography_gis_mapping_drafting

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.

QHSE Specialist

- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning

Results orientated, hands on multitasked, multifunctional, dedicated manager. Experienced in materials. systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.

CERTIFIED AS A COMPETENT AUTHORITY AND REGISTERED QUALIFIED PERSON BY INDIAN BUREAU OF MINES, GOVERNMENT OF INDIA FOR MAKING MINING PLANS REGISTRATION NUMBER : RQP/NGP/199/97/A NAGPUR

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

All I&C design aspects. IN-Tools, Microstation, Autocad, MS Office suite software.

Over twenty-eight years in various assignments throughout the oil and gas industry, I have had twenty one years within the production side of the field, including work off the Gulf of Mexico and Venezuela. I have been in charge of multimillion dollar production platforms, responsible for monthly we

G & G Support consultant, experienced and trained on Landmark graphics applications for seismic data interpretation.processing,mapping, time/depth modelling.

Maintaining and overseeing drilling company with 7 drilling rigs and 38 employees

Vastly experienced electrical engineer, manager, superintendent, supervisor

Senior Project Expediter for EPC firms.

I am an operations manager with over 25 years of a proven track record in refinery operation, power generation, training and large refinery projects

Over 25 years of Diverse Design and Drafting Experience

Autocad, Microstation, PDS

Detail engineering and commisisoning

Over ten years in management, team player, strong work and ethical background. Posess excellent oral and written communication skills.

instrument Engineer in OIL& GAS field

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

I am a Master Mariner, presently serving as Senior Master on Crude/Product Oil Tankers of Dynacom Tankers Management

Free! As a hard working IWCF Certified drilling professional with over 23 years of hands-on experience in the drilling industry and as a positive and trustworthy person, I am confident that I can become a reliable addition to your team.

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

A piping designer that has multiple experience in piping industry. Holder of BS Mechanical Engineering with piping design experience over 7 years and more than 5 years of field assignments. A designer that has proficiency in 3D CADWorx, Microstation, AutoCAD, Navis Works, Laser Scan, & PDS trained.

Highly motivted, energetic,and judicious professional looking for employment with diversified corporation for long term employment. Strong attributes include proficiency and multi-tasking. Able to respond to global assignments and enjoy working in a multi-cultural environment.

12+ years of project and design engineering with subsea oil and gas installation contractors and consultants working on package management, site management, installation engineering, FEED and Detailed Design with a strong focus on Subsea Pipelines

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

Areas of Expertise: Design of offshore structures performing Global and Local analysis of Floating Production Systems, Jack up Platforms, Semi Submersible Platforms & Jackets,

QA/QC-INSPECTOR/ENGINEER- E&I

9+ years of work experience in Content management & Data Cataloguing

With a total of 20 years experience in various welding jobs from an oil gas, refinery & pipeline fabrication, platform, jet & fuel tanks, etc. With experience in pipe welding, pipe fitting fabrication, arc (SMAW) welding, gas welding, TIG, and FCAW welding. Familiar and actual practitioner of Weldi

Presently working on board a Jack-up rig in Qatar (Noble Rig) since October, 2007 as SAFETY TRAINING SUPERVISOR (STS). 11 months worked on board same Jack-up rig in Qatar Offshore (Noble Rig) as Radio Operator / Trainee Safety Officer.Passed with Credit, NEBOSH INTERNATIONAL GENERALC

Mechanical Engineer with 10 years of professional experience mostly in ESP and HPS designed worked for Schlumberger REDA and Woodgroup ESP. in artificial lift.

Piping Superintendent/Supervisor/Field engineer (PMT preference) Civil Engineering Diploma

Groupement Berkine (Sonatrach-Anadarko Corporation) currently base in Hassi Messaoud, Algeria

Working as a field operator in NGL Fractionation Unit , Gas treating unit by MDEA, regeneration of amine and SRU Claus Process Unit for precommissioning, commissioning start up and operation. Operating knowledge of pressure and atmospheric distillation, furnaces for sulphur production, amine

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out