Resume - Reservoir Engineer/Reservoir Simulation Engineer/Completion Engineer

Misco Jobs

Resume #56177

CONTACT INFORMATION:
View contact information...

Career Objective

To seek a challenging position that will leverage my technical, analytical and programming expertise and enable me develop new and valuable skill sets.

Education

M.S., Petroleum Engineering Jan'2005-Dec'2006
West Virginia University Morgantown, West Virginia.
GPA: 3.6/4.0. Related Course Work:
Drilling Engineering, Petrophysics, Natural Gas Engineering, Advanced Formation Evaluation, Reservoir Engineering, Production

Engineering, Pressure Transient Analysis, Reservoir Stimulation & Modeling, Coal Bed Methane, Petroleum and Natural Gas Engineering Problems.

B.S., Chemical Engineering Aug'1999-May'2003
Osmania University Hyderabad, Andhrapradesh, India
GPA: 3.4/4.0.

Course Work Projects

1) Drill String Design
* Design drilling assembly and determine the rotary drill rig capacity and limitations for a rig to drill a new well at the selected field.

Calculate forces on the drill string.
* Designed and developed a hydraulics program to determine pressure drop in a wellbore.
* Designed the most suitable combination string for the intermediate casing and compared results with the Lone Star Steel's casing design program.

2) Pipeline Technology
* Pressure calculations in extraction and transportation of natural gas.
* Based on which is most economic, a plan of action was developed to maintain contract production rate (a) Drilling additional wells (b)Stimulation or skin the wells (c) Install a compressor at the field processing plant.

3) Pressure Transient Analysis
* Investigate transient rate-decline test for a gas well with constant bottom-hole pressure, wellbore storage, and high velocity flow effects; determine parameters of interest which are formation permeability, non-Darcy flow coefficient, and mechanical skin factor.

4) Well Testing Analysis
* Well test analysis of six real wells was conducted and results were verified with Schlumberger's Eclipse.
* Line fitting and type curve analysis was conducted to identify initial time, middle time and boundary effects.

5) Design piping & surface production equipments of well
* Design the downhole tubing, packer, and other surface and subsurface assembly.
* An artificial lift system was selected to maintain the bottomhole pressure later in the life of the reservoir.
* Suitable packer completion was selected and then determined the length changes and/or forces for the packer under the following conditions: 1. producing with natural flow. 2. Stimulation treatment.
* Nodal analysis was conducted, using bottom hole as the solution node to determine the most efficient tubing size for the hydrocarbon production.

6) Reservoir Simulation and Modeling
* Calculation of temperatures in 342 cellblocks that are unknown in a reservoir was carried out using mathematical flow solution methods under the given constraints.
* Isopac mapping was used to determine depth, porosity, and permeability of the reservoir.
* Designed reservoir simulator using visual basic.

7) Reservoir Estimation by volumetric and material balance.
* Hydrocarbon estimation was carried out by volumetric and material balance methods.
* Economic feasibility checks of drilling additional wells in the reservoir considering productivity index and fixed cost.

8) Gas Storage
* Determine condensate production in a gas reservoir.
* A simulator was used to find the gas and condensate production before and after the mixing stages.
* The Net Cash Flow (NCF) and Net Present Value (NPV) for different interest rates were computed.
Thesis

"Development of water production type curves for horizontal wells in coalbed methane reservoirs." Masters Thesis, PNGE, WVU. Praveen

Kumar Burka Narayana, December 2006, 70.

Work Experience

1) Graduate Research Assistant Jan'2006-Dec'2006
Department of Petroleum and Natural Gas Engineering Morgantown, West Virginia.

Tasks and responsibilities: Developed a simple and reliable tool for water production predictions in horizontal wells. A unique set of type curves were generated and based on it a correlation for the peak water rate was also developed in order to forecast production in the absence of any production data.

2) Graduate Teaching Assistant Jan'2006-May'2006
Department of Petroleum and Natural Gas Engineering Morgantown, West Virginia.

Tasks and responsibilities: Assisting Dr. Ilkin Bilgesu in lecturing, demonstration of experiments, grading and proctoring for Drilling

Engineering, Drilling Fluids Laboratory, and Petroleum Reservoir Engineering Laboratory.
3) Internship 2003 to 2004
Indian Institute of Chemical Technology, India. Hyderabad, Andhrapradesh

Tasks and responsibilities: Worked on "Manufacture of Ethyl 4 Chloro Aceto Acetate" and "1 Bromo Pentane", under the guidance of Dr. A. Krishna Reddy (Scientist-F).

Presentations and publications

1. Type curves for Horizontal wells, Society of Petroleum Engineers, Morgantown, West Virginia, 2006 to 2007. Authoring a technical paper on type curves for horizontal wells.

2. Received 2nd Prize for presenting paper on "Gas Conversion - An Indian Perspective" at Chemical Engineers Congress 2002, Hyderabad,

A.P, India.

Computer Skills

Packages: MS Office Tools.
Languages: C, FORTRAN 90, Pascal, Visual basic 6.0.
Petroleum Related Software's: Eclipse (Well Testing 200), OFM, PipeSim, CMG Simulator, and Crystal Ball.

Honors

1. Student Chapter President, Indian Institute of Chemical Engineers (IIChe), CBIT, Hyderabad, Andhrapradesh, India, 2002 to 2003. As an

IIChe student chapter president, I have organized and participated in various inter-college, state-level and national level seminars.

2. Student Member, Society of Petroleum Engineers, Morgantown, West Virginia, 2005 to 2007.

3. Appreciation Award, Chemical Engineers Congress, Hyderabad, Andhrapradesh, India, for organizing CHEMCON 2002 Successfully.

References
Available upon request

* Legally authorized to work.
* Willing to relocate.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6651 to 6700 of 10816)

Go to Search Parameters...

Brief Description

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

10 years offshore oil/gas experience, Roustabout,Production Operator,Lead Production Operator

A sound technical chemical engineer with much back gound of marketing knowledge/ experience. Hence able to work techno-commercially

Strong experienced leader with very good communication, negotiation and analytical skills. Very familiar with related design software & MS Office applications. Looking for permanent/contract position as Senior Civil, Structural, Offshore pipeline or Project Engineer for Oil & Gas Projects

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

A Senior Electric and instrument Engineer with a wide range of experience in the copper smelter & refinery. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

MSc in Petroleum Geology.

I have completed the post graduation diploma in piping engineering from suvidya institute of technology,mumbai in june-2007 and looking for piping job.

MechanicalEngineer

Diploma chemical Engineer 2Years Exprience in Automobile Paint Shop ,2years Exprience in Organic Chemical Manufaturing

Competent in Microsoft Office application, 2D Auto-cad Design, Good Oral and Interpersonal Skill, Excellent Administrative and Managerial Skills.

Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009

Certified Rigger, Welder helper, and Forklift driver.

Strong Communications skills, Micosoft- Word, Excel, Power point, Woking together well with people

ssc from govt boys high school hyderabad, pursuing b.a 1st year from Open univerisity hyderabad

Working in the field of Ndt since last 7 years, worked in various types of industries such as Petrochemicals, Petroleum and Construction fields.

Electrical Engineer-Inspector-Surveyors

PhD in chemical engineering. Expert in nanoparticle synthesis, surface modification, dispersion in polymer melts seeking research and development position in Richmond, Virginia.

SETP WINPCS SYSTEM USING C++ CODES. MODIFY P&ID USING AUTOCAD, SCHEDULE USING PRIMAVERA. GATHER ALL ENGINEERING DATA AND LOAD ALL IN WINPCS BY DISCIPLINE BY SUBSYSTEM.CERTIFY COMPLETED SYSTEM, HANDOVER MECHANICALLY COMPLETED SYSTEM FOR COMMISSIONING. PREPARE ALL HAND OVER DOSSIERS BY SYSTEM.

New Construction Surveys, Surveys on Jack-up rigs, Drill Ships, Semi-submersibles, Tankers, Bulk carriers, Offshore support vessels, Vendor Surveys, Welding and NDT Inspector, presently under training as ISM/ISPS Code Auditor

For the past Nine years I have been working as a Land Surveyor, I have acquired persuasive techniques that are needed to become a specialized Land Surveyor for buildings and infrastructure.

Bachelor in Mechanical Engineering, 7 years of experiences in Open Hole Completions (Liner Hanger), Case Hole Completions & Thru Tubing (Milling, Inflatables and Whipstock)

complete mechanical design & detail engineering of pressure vessels, heat exchangers, columns, reactors, jacketed vessels, refractory lined equipments, storage tanks, silos/bins & structural skids etc.

I am working as operation engineer in Pak-Arab Refinery (PARCO) Pakistan since 2001

CEMENTING OPERATOR

Reservoir Engineer/Reservoir Simulation Engineer/Completion Engineer

pursuing MSc(Applied Geophysics) from IIT Bombay

I am interested in applying for a position as a Health & Safety Technician. My expertise lies in the design and implementation of safety programs for the Oil & Gas, Mining, and Construction industries as well as Refinery/Power generation facilities.

Process engineer with offshore, process, utility and storage experience

Experienced senior field QC Seismologist in desert, arctic and shallow water OBC. Comfortable with all aspects of in-field QC, including data processing, source/receiver attribute analysis, survey design and planning and reporting. Exp in Tango, GeoCluster, Geoland, Mesa, Perl, LabView, Testif-I.

It’s of my great pleasure to apply my resume at your respect company seeking for hiring qualified personnel as a Corrosion and Inspection Engineer.

Critical Care Paramedic

I have 11 years of working experience. I have worked all stages of Operation & Maintenance, troubleshooting and Production handling independently. I don’t have experience in offshore.

I have recently relocated to Southern California from Houston Texas. I am willing to travel, and can easily relocate anywhere in the United States. I am very flexible and able to start immediately.

To obtain a position in the field of Chemical Engineering and its related fields that will utilize and nurture my skills and knowledge.

Industrial Engineer seeking position in the field of Industrial and Systems Engineering.

CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent

ddd

OBJECTIVE To obtain a position as a process engineer where my skills, experience and qualifications can be fully utilized to our mutual benefit.

To join a progressive organization which offers upward mobility, both financially and professionally.

I have knowledge in Maintenance and Operation procedures. My experience is in PM's, Reliability, Planning & Scheduling. I would like to continue to grow in the Petroleum Industry and at present I am continuing my education in Operation Controls. I am also very interested in offshore or shift work.

Logging Supervisor Well Site Petroleum Engineer, Well service Engineer Production technologist Engineer at Al Furat Petroleum Company

The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.

I'm a Control and Instrumentation specialist, interested in contract/permanent work anywhere in the world. I've got extensive experience in instrumentation (13yrs) and have contracted in various capacities on contracts in Africa (South Africa and Mozambique)

I have a B.S. in Petroleum & Natural Gas Engineering. I also posses excellent analytical skills in exploration and production modeling. I am also able to prepare and evaluate complex life-cycle development schemes, pursue ambitious exploration and appraisal strategies.

Seek a position in the area of finance that is both challenging and rewarding. The position should offer professional and personal growth.

To Work with a leading organization providing excellent learning and opportunities to work as an effective team member.

I earned a B.S. Engineering Science degree in 2001. My degree is a combination of mechanical, civil, and electrical coursework. I am not looking industry specific.

highly qualified and skilled chemical engineer with 5 years of hands-on experience in oil and gas industry looking for a contract or full-time position in the petroleum industry in the united states or europe.

PIPING DESIGN ENGINEERING

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 [ 134 ] 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out