Resume - Almost 6 years relevant experience in Instrumentation Technology. Having experie...

Misco Jobs

Resume #583

CONTACT INFORMATION:
View contact information...

Objective
CAREER SUMMARY

Almost 6 years relevant experience in Instrumentation Technology. Having experience in refineries, Petrochemical Plant, Fertilizer Plant & Oil & Gas Plant. Covered duties including installation, testing, calibration of field instrument such as: Pressure, Flow, Level and Temperature Transmitter Switches, Indicator, etc.
Installation and wiring of Programmable Logic Control (PLC), Distribution Control System (DCS) and ESD System Panel (ESD). Responsible for Site Acceptance Test (SAT) of ABB Advant 460 DCS, ABB August PLC, Compressor Control System and Bently Nevada 3500 vibration systems. Assisting vendors in calibrating and checking Input/output cards, pre commissioning and commissioning of H2S gas monitoring system, Vibration monitoring system. Preparation of loop packages as per SAUDI ARAMCO standard. Having experience in documentation, which I prepared all types of drawings to be use prior to pre-commissioning of instrument on field. Such as; P&ID'S, ILD'S, Control and Logic drawings, Etc. I have also experienced in operating of (TDC-3000) Honeywell Console, Foxboro, Yocogawa and Siemens, Abb (Advant 460) Consoles. Ability to read the piping and instrument Diagram (P&ID), Instrument Loop Diagram, Instrument Data Sheet and Logic and Control Circuit Diagrams, Etc. And having knowledge in Computer. Participating commissioning group during the nearly completion of the project. Assigned construction and startup programs were completed under budget and up to one half of scheduled time.

INSTRUMENT HANDLED:

Foxboro AI Series, Valtek Instrument, General Monitors, Fisher, Barton Instrument, Magnetrol, Rotorque, Limitorque and US Gauges, Foxboro (Aspec 200 System), Rosemount, Nouvo Pignone, Bentley Nevada, Honeywell System, ABB Kent Taylor, Hartman & Braun, Delta Control.
------------------------------

Experience
S. A. Kent Co. Ltd.
Instrument Technician
Alkhobar K.S.A.
November 24,1998 - Present
------------------------------
Responsible for Site Acceptance Test (SAT) of ABB Advant 460 DCS, ABB August PLC, Compressor Control System and Bently Nevada 3500 vibration systems. 100% simulation for Digital and Analog DCS and ESD Input and Output cards.

Redlining of all instrumentation drawing such as: P&ID, Instrument loop drawing, Logic drawing, DCS and ESD Wiring and Interconnection diagram.

As part of Hawiyah project, I involved in loop checking pre commissioning and commissioning during start up of its unit.

Bench calibration of field instruments such as: Pressure, Flow, Level, Temperature Transmitter, Switches, Relief & Control Valve, Thermocouples & Resistance Temperature Detector, Voltage & Current Transducer and Gauges to each required setting and range based in the Specification Sheet or Data Sheet.

Calibration of Control Valve and Motor Operated Valve (MOV) and perform valve stroking after installation on site.

Checking of instruments and materials to be installed to find out which are defective and locking.

Preparation of loop packages as per ARAMCO Standard.

Loop checking and commissioning during start-up of each unit.

Hyundai Engineering & Construction Co. Ltd.
Instrument Technician
People’s Libyan Arab Jamaheriya, Libya June 30,1997 - June 21,1998
------------------------------
Installation and calibration of all instruments such as: Transmitters, Transducers, Control Valve, Switches, Gauges, Thermocouple & Resistance Temperature Detector (RTD), etc.

Assisting engineers and vendors in calibrating and checking the input/output cards, Electronic Alarm Signaling Unit (TES 20) for temperature and standard signals, Process Electronic Controller (Protronic 500/550), pneumatic controller and isolating IS Interface Units (MT 4000 Series).

Loop testing and calibration of all instruments in field to each required setting and range based on the Instrument Data Sheets. Calibration of Control Valve and checking if it is in working condition and performing also valve stroking during loop checking on site to control room.

Assisting general foreman in checking the instruments and materials to be installed and recorded those which are defective and locking.

Ability to read the Piping and Instrument Diagram (P&ID), Instrument Loop Diagram (ILD), Instrument Specification or Data Sheet and Control & Logic Diagram.

Participating commissioning group during the nearly completion of the project, works such as: Instrument Installation, Instrument Tagging, System testing, final Loop checking during start-up of each units.

Belleli SPA.
Industrial Technician
UMM Said , State of Qatar February 1,1996 - January 2,1997
------------------------------
Installation of Electrical & Instrument equipment’s such as: Gas Insulated Switch Gear (GIS), Motor Control Center (MCC), Un-interruptible Power System(UPS), Distribution Control System (DCS), Programmable Logic Control (PLC), Emergency Shutdown (ESD), Power Vibration and Speed Monitoring Panel, Marshalling Cabinet and Field Instruments including termination and line checking of instrument cable.

Responsible in calibration of field instruments such as: Transmitters, Control Valves, Switches Converter, Gauges and all related instruments with Honeywell System and Foxboro AIS.

Responsible also in pre-commissioning and perform loop testing during pre-commissioning stage in boiler & reformer.

Assisting vendor (ABB Colors DEMAG) in rewiring, pre-commissioning, function checking of 66 kV (SFG) Gas Insulated Switch gear.

Assisting engineers and senior technician in calibrating and checking of input/output and alarms card of Aspec 200 System (Foxboro) located in the RAC Room.
Assisting fitters in installation of lead lines, air supply lines, process tubing & piping and all connection and wiring needed for every loops.
Knowledge to read Process and Instrument Diagram as well as Motor Control Center Schematic Drawings and Logic drawings. Participating commissioning group during the nearly completion of the project, works such as:, Instrument Tagging, System testing, final Loop checking, Commissioning during start-up of each units.

Sewoong Industries Co. Ltd.
Instrument Technician
Libyan Arab Jamaheriya, Libya March 15,1994 - September 22,1995
------------------------------
Participating in construction of Hydrogen Compressor Unit.

Calibration and installation of field instruments such as: Pressure, Flow, Level and Temperature Transmitter, Switches, Control Valve, Gauges, Converter, Thermocouple & Resistance Temperature Detector (RTD). Installation of instrument panel such as Distributed Control system (DCS), Programmable Logic Control (PLC), Interposing relay panel including termination, line checking of instrument cable.

Calibration of Control Valves and checking if it is in working condition and performing valve stroking after installation.

Assisting fitters and welders in fabrication of all materials such as: brackets, instrument supports, stanchions, cable tray, tube tray and process piping support.

Assisting fitters in installation of lead lines, air supply lines, process tubing & piping and all connection and wiring needed for every loops.

Ability to read the Piping and Instrument Diagram (P&ID), Instrument Loop Diagram, Instrument Data or Specification Sheet and Logic Circuit Diagram.

------------------------------
Education
Don Bosco Technical Institute
Electrical Technology
Makati Philippines

Technological University of the Philippines
Instrumentation and Process Control
Manila , Philippines

------------------------------
Skills
COMPUTER KNOWLEDGE

Microsoft Windows 95 (Microsoft Excel , Microsoft Word , Access,
Microsoft Power Point, etc.)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7051 to 7100 of 9871)

Go to Search Parameters...

Brief Description

Almost 6 years relevant experience in Instrumentation Technology. Having experience in refineries, Petrochemical Plant, Fertilizer Plant & Oil & Gas Plant.

Seeking for an entry level position.

I'm a qualified Aircraft Autopilot maintenance engineer, seeking a challenge in the oil industry. I would like to challenge myself, working with all electronic and related fields.

3rd Class Power Engineer

i am working in the field of painting for 9 years mainly in in application and inspection

industrial maintenance mechanic/millwright ( red seal ) any thing mechanical ,some electrial

Skilled pump technician w/ 4 yrs experience building & repairing down hole pumps incl. insert & tubing pumps. Completed training for field repairs and pump certification (Levels II - well operations & Level III - pump mechanics). Hard-working, good attention to detail. Excellent evaluations.

I am a fresh graduate from the Jordan University of Science and Technology. I have a bachelor's degree in Mechanical Engineering with a minor in Mechatronics Engineering.

GIS Packages: MapInfo Products, AutoDesk Products, ArcGIS,

Well versed in P3e, P3 and MS Projects with very good knowledge of spread sheets and MS Access database. Have experience of Petrochemical, Oil & Gas and Chemical Projects. Have also seccessfully executed few projects as Project Manager.

Highlights of Qualifications: Diploma in Electrical Engineering from Maharaja Sayajirao University of Baroda, Gujarat, India. Registered license holder of Industrial Electrician from Ministry of Training colleges and University, Ontario, Canada (Licenced 442A), Applied for C.E.T. certification to OC

Ten years with major Oil and Gas company; managing,planning ,tracking drilling and completion operations up to 100MM$ AFE. High expertise in Contractual Strategies (Incentived Contracts, Risk reward) Areas of experience are worldwide Off Shore and On Shore.

About Ten years experience with engineering of Oil and Gas project (Process Platform & Well head Platform), Electrical Substation, HV/MV/LV apparatus switchgears/ MCC, MV/ LV Motors, power supply unit, UPS control equipments, Electrical on Mechanical Package (Gas Compressor, Fire Water, Gas Turbine)

Oilfield Supervisor fracturing high pressure

5 years with schlumberger oilfied sevices company as high pressure pump operator

Instrument Tech that is capable of working on most end devices and bend 1/4" to 1/2" SS Tubing

To join a competent and reputed organization and exhibit talent to be promonent as an excellent professional engineer

Oil Field Inspection Specialist (30 year career), experienced in all aspects of plant equipment inspection: Pressure Vessels, Gas fired and Waste Heaters, Tankage, Piping, Pipeline, PSVs, Offshore Platform structures & Cranes. Skilled in Risk Based Inspection & Equipment Strategy procedures.

To acquire a technical/management position where engineering experience and managerial skills will significantly contribute to use the skills obtained through my experience and qualifications to benefit my employer and grow my self with organization.

MASTERS - Mechanical Engineering – [GPA: 3.6 / 4]

BE Chemical with more than 5 Yrs of Experience in Water treatment industries and also Petrolium Industries.

Structural Engineer with broad knowledge on design and analysis of Buildings (concrete and steel structures). Full knowledge in using Computer aided design Software such as Etabs, Staad pro, Prokon, Sap2000, CSI Safe, Xsteel, AutoCAD, Microstation, and other Computer programs (MS Office Word, Excel,

·Languages: Advanced Levels in Arabic, English and French (written and spoken)· Computer Literate: Advanced Levels in MS Word, MS Excel, MS PowerPoint, Internet, Fortran, Pascal, AutoCAD· Technical competency, design experience, communication skills, & problem-solving abilities

10 years Systems Administration experience, wide verity of systems.

Hands on experience in plant maintenance instrumentation as well as commissioning and precommissioning activities of the various chemical and petrochemical plants. Have experience in control valve overhauling, maintenance of transmitters,DCS,PLC etc.

Experienced Professional in Port Operations, Security Operations, Marine Operations, Operations Management, Environmental, Health, and safety, Administration, Logistical, Maintenance, Planning, Scheduling and Human Resource.

A well-established and competent professional with 8 years experience gained in offshore drilling operations within the oil and gas industry.

Mechanical Engineer

8 yrs experience in oil and gas industry, looking to start career in offshore or allied industry, available immediately

Worked as Senior Engineer in the Instrumentation Department of Travancore Cochin Chemicals Ltd., Kochi from Oct 1999 till date. Got trained in the calibration, troubleshooting, and maintenance of different types of pneumatic, electrical and electronic instruments.

I'M READY TO WORK WITHOUT SUPERVISION

BSC in petroleum engineering. experienced in 2 petroleum services companies as directional drilling for 1 1/2 years , courses in directional drilling , DRILLING SOFTWARE , H2S AND BREATHING APP., LITHIUM BATTERY SAFETY. READY FOR RELOCATE IMMEDIATLY.

Petroleum Engineer with 08 years of highly diversified experience in different countries, companies & in Production, Reservoir, Facilities, Stimulation, Completions, and Drilling; major and independent responsibilties.

*2 years in R&D division of Memcor Australia (a Veolia Company); *Applied Science / International Studies degree at the University of Technology, Sydney (2003); *Languages: French (fluent), Russian (basic); *Ability to work anywhere.

Pipe fabrication, pipe fittings, layout, maintanence and servicing, assembling

maintenance millwright-28yrs. from trainee to maint. superintendent

Over twenty years experience covering all aspects of Document Control and Information Management responsible for the supervision of junior staff and the management of Document Control. I have worked in a variety of locations in the UK and overseas (Libya and Qatar)

DIVERSE POWER GENERATION and MAINTENANCE MANAGEMENT PROFESSIONAL

Diploma In Electronics & Communication.Has 11 years of experience in the field of Implementation, Operation & Maintenance of Telecom Voice & Data /Fiber Optic/Copper Networks.

Ten years experience as Production Engineer and Asset Manager for Schlumberger Integrated Project Management. Certified Project Management Professional (PMP)

good command of DCS

I am a petrophysicist working on geoframe software of slb and elan volumetric analysis .

Lead Control Systems Engineer / Project Manager having more than 16 years of experience with multinationals

Drilling Engineering skills - all facets of offshore and land well planning and execution. Specialties - underbalanced drilling and horizontal wells

Application for the post of BOILOR OPERATOR

Plant/field/well head operator

Coiled Tubing Supervisor

A+, Computer Engineer

Human Resources, Industrial Relations, General Affairs, Site Administrator, Representative, or Logistics/Material Handling.

Floorhand certification,driver lic.,whimis,H2S

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 [ 142 ] 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out