Resume - Plant inspection, QA/QC, Welding inspection, condition monitoring

Misco Jobs

Resume #5869

CONTACT INFORMATION:
View contact information...

PERSONAL DETAILS

Nationality: Indian
Religion: Hindu
Date of Birth: 18th August 1974
Availability: One Month notice

EDUCATION

DIPLOMA BOARD % OF MARKS
B.TECH IN MECH. ENGG. J N T UNIVERSITY, INDIA 70
DIPLOMA IN MECH. ENGG. STATE BOARD OF TECHNICAL EDUCATION, A.P.,INDIA 90

TECHNICAL TRAINING COURSES

* CSWIP – 3.2 (Senior Welding Inspector) by TWI, UK.
* Certified welding inspector by American Welding Society (AWS), USA.
* Certified welding inspector by Welding research institute, BHEL, Trichy, INDIA
* ASNT level-II in UT,RT & MPT.
* Certified Radiographer by BHABHA ATOMIC RESEARCH CENTRE (BARC), INDIA.
* In-house training in Eddy current testing by Eddy current technology incorporated, Virginia, USA.

EXPERIENCE:

* Total years of experience: 9 years
* Period of experience: 1995 August – Till date

EMPLOYMENT HISTORY

PRESENT EMPLOYER: M/s Samsung Corporation, Korea
(from 2003 Feb to till date)

Project: 3 nos. LPG tanks for Qatar Petroleum, Qatar

Project Details: Engineering, Procurement, Installation & Commissioning of 3 nos (1 00 000 M3 )LPG Tanks & Conversion of
Existing 2 Nos Propane tanks to Butane Storage Tanks for Qatar Petroleum.

Position: Sr. Inspector – Tanks & Piping

Period of Working: 2003 Feb to till date

Responsibilities:

1. Inspection and Quality control of Tank welding activities as per qualified welding procedures.
2. Carryout welder qualification test for welders and also PQT and PTP.
3. Witnessing Lifting equipment load test.
4. Inspection of all static equipment before installation and document review of vendor.
5. Verticality and alignment check of all structural members like columns, pipe racks etc.,
6. Interpretation of Radiographs, Review of NDT reports.
7. Monitoring of welding activities like electrode backing, preheating, Inter-pass temperature.
8. Preparation of weld history sheet, parameter records and dimension report.
9. Witnessing and monitoring of PWHT in shop and site.
10. Document review and making punch lists.
11. Interpretation of drawings, welding symbols and dimensional inspection.

PREVIOUS EMPLOYER: Nagarjuna Fertilizes and Chemicals Limited, India

The double stream Naphtha and Natural gas fertilizer plant producing urea (4800 MTPD
capacity) with necessary offsites and power plant facilities

Period of Working: 1995 August to 2003 February

Position Handled: PLANT INSPECTOR

Responsibilities:

* Inspection of all static equipment like Pressure Vessels, Heat Exchangers, Columns, Reactors connecting pipe lines, Furnaces, Boilers and Storage tanks.
* Periodic survey of thickness of equipment such as Columns, Vessels, Tanks etc and Piping systems using Ultrasonic thickness meters. Corrosion monitoring of all static equipment and piping through computerized trending of thickness.
* Preparation of check lists, schedules for inspection / NDT like thickness measurement of static equipment and pipeline, temperature measurement, Ultrasonic flaw detection, radiography, Dye Penetrant test, leak testing of heat exchangers and strippers and Magnetic Particle Testing based on operating conditions and fluid handled.
* Inspection of static equipment & pipe lines by conducting LPT, Fluorescent LPT, MT, Fluorescent MT, RT, UT.
* Positive Material Identification (PMI) and Hardness measurement (by Rebounce technique and ultrasonic methods)
* Ferrite check of Stainless steel by Ferrite meter.
* Generating inspection reports of findings and observations in time to make necessary corrective actions.
* Planning turnaround inspection activities and co-ordinate and complete the jobs in-time as per schedule.
* Stage wise Welding inspection of static equipment and connected pipe lines.
* Inspection of plant equipment at vendor before dispatch.
* Inspection of Heat exchanger tubes by Eddy current testing using highly sophisticated computerized ECT equipment (ectmad8D software).
* Internal inspection of Side fired vertical reformers, Long towers and Acid storage tanks and Boilers in annual turn-around and short shut-downs and preparing reports with necessary recommendations
* Fibroscopy inspection of pipelines and heat exchanger tubes for corrosion and erosion assessment.
* ID measurement using HOLE GAUGE in Urea stripper tubes and heat exchangers.
* Positive material identification of pipes, fittings, Valves, Bars, Plates etc., using sophisticated equipment like SPECTROPORT & ALLOY ANALYSER.
* Condition assessment of Rubber lined Vessels and Tanks by holiday detection testing & Shore-A hardness measurement.
* Leak detection of heat exchanger tubes, vacuum systems etc by using Ultra probe, Vacuum leak detection kit.
* Temperature scanning of high temperature equipmì¥Á 7 ø ¿ ›

INCLUDEPICTURE \d "Quality Resume_files/gldline.gif"

PERSONAL DETAILS

Nationality: Indian
Religion: Hindu
Passport Number: B – 1782681
Date of Birth: 18th August 1974
Availability: One Month notice
Contact Phone Number: +974 – 5291210 (Qatar)

EDUCATION

DiplomaBoard% of marksB.TECH IN MECH. ENGG.J N T UNIVERSITY, INDIA70DIPLOMA IN MECH. ENGG.STATE BOARD OF TECHNICAL EDUCATION, A.P.,INDIA90

TECHNICAL TRAINING COURSES

CSWIP – 3.2 (Senior Welding Insp consumables required for regular inspection and shutdown activities.

* Making Correspondence with different vendors to identify required NDT consumables.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6251 to 6300 of 10917)

Go to Search Parameters...

Brief Description

AutoCad drafter

Piping Designer – 3D Modeling - PDMS - Microstation - Plant Space – 3DM - Auto-CAD

I have a 4 years degree in geology with a relevant experience as wellsite geologist. Actually I have witnessed more than 30 horizontals wells drilled and 10 verticals one's.I can say that I have gained a great knowledge of how to solve drillings problems when they occur.

Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems)

Key specializations: GE Turbine control systems- MKIV, MKV, MKVI, GE excitation systems- busfed, potentialand compound source, SVR, rotating DC, brushless, EX2000, EX2100, Load commutated inverters (static start), electrical and generator protection. DLN 1.0, 2.0+, 2.6 systems, versamax PLC, genius

BE (MECH ) PIPING DESIGNING & STRESS ANALYSIS

Well Engineering skills

Autocad drafter designer

I am a fully qualified derrickman and have been working offshore for the past 9 years.

I have learned Software : Pipesim 2000, Caesar II, Microsoft Office, Power Point, Autocad 2D

I worked as mud engineer for 2 years in Indonesia and now I am solid control engineer and I am running a job for Drilling Project in Libya

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

Have been welding for over 10 years the lat 4 have been in the oil field and now i want to get into the pipe welding but will the oil field for as long as i can

B-Tech in Chemical Engineering.

Planning Engineer, Certificate of degree Dr. of Philosophy

Professional graduate engineer experienced in Facilities Management, CMMS implementation and application, Technical Writing. Recent 16 months in Kazakhstan. Interested in contract work (rotational or short-term)

I am a Mechanical Engineer with around 9 years of experince, with knowledge in construction project manage. Desing of wellhead equipment, and drilling equipment, certified in none destructive examination.

Familier with oil refining process an simulations:HYSYS,Flare net - Familiar with CDU (Crude Distilation Unit) /VDU (Vacume Distilation Unit) /HCU (Hydro Craker unit) /NHT,Unifiner,CCR /LPG /VBU (Visbreaker Unit) /AMINE /SWS (Sure Water Stripper Unit) /SRU (Sulphur recovery unit)

Wireline senior field engineer

I did Diploma in 1999, Graduation in 2002 in Mechanical Engineering & Post Graduations in Energy System. I am very much interested in the energy efficiency. Presently i am working in the THERMAX India Ltd, as a Sr. Executive - Proposals. My job profile is Process design of API type Fired Heaters.

Instrument Tech / Electrical Officer (ETO) / Electronics officer

Extensive experience in piping layout, stress analysis & Support gad, Isometrics & BOM, procurement assistance, site engineering survey & site assistance during Project execution and project management.

Qualification-Diploma in Mechanical Engineer

Reservoir Geology, Calculations of Hydrocarbons in Place & Analyzing All Parameters Which Affect the Results and their uncertainties, Reservoir Mapping(structural, petrophysical & facies) to make up the Geological Model, Dipmeter Processing & Interpretation Using Incline Software, Fault sealing an

Drilling Engineer & Manager (on & offshore with deep water) some completions

ROTATING EQUIPMENT ENGINEER OBJECTIVE: Successful career in oil & gas industry as Rotating Equipment Engineer

International experience in both drilling and production

Overall 8 years working experience in Document Control / Technical Clerk / IT Assistant / Planning Assistant. Very good knowledge in Computer networking, operating system, office software, specific software, software development, etc.

PROCUREMENT ENGR

Position Manager Instrumentation & Controls Summary of Experience: Specialist in Instrumentation and Process Control Systems Engineering & Commissioning with over thirty three years experience of grass roots Lump Sum Turnkey projects worldwide.

•Seismic data acquisition and processing •Punctual, motivated, achievement oriented, highly organised and competent individual •Team player, able to work under pressure and to meet deadlines

OBJECTIVE Focusing on Project/Interface Engineering positions in the energy sector encompassing deepwater production/operations, project development, commercial and technology development.

Experienced electrical and mechanical pipeline tech.

Plant inspection, QA/QC, Welding inspection, condition monitoring

Innovative Petroleum Engineer, who is a proven performer achieving great results in the past assignments. Excellent ability to work with multifunctional teams and experience in international locations. Eager learner. Masters degrees in both Computer Science and Petroleum Engineering.

Piping Design And Pipe Stress Engineer with 9 years of experience working with Worlds Largest Grass Root Refinery of Reliance Industries Limited at Jamnagar, Gujarat , INDIA.

Assets/inventory co-ordinator

Professional experience - Problem solving and design modifications in accordance with the engineering standards. - Project execution, upkeep of records/manuals, scheduling jobs, spares/material/manpower management etc. - -

I have total 9 years experience as production/process operator in the petrochemical industries.

Sales and Operations Officer targeting Productivity and Organizational Development

Civil Engineering and Petroleum Engineering degree with various skills in Microsoft Excel Macro, HYSYS system and minimum drafting capability.

Worked oil rigs overseas, including Yemen,Venezuela, Ecuador, Cuba and Russia. Did oil rig servicing in Alberta. I am presently working and would like to take an overseas position.

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

I'm petroleum engineer,graduated in 1995 from suez canal university , work in egypt in suez oil company as petroleum engineer.

15 years experience of mechanical training in the middle east. This includes classroom, workshop, OJT, course design and writing and training course administration.

OVERVIEW OF RESUME WITH Experience spanning over nine years, I have worked as HSE inspector, HSE engineer and HSE coordinator on major oil & gas projects within the oil industry .

Production Engineer with strong IT skills and over 6 years experience in oil and gas production engineering and operations, with expertise in surface operations, plant start up, well services, planning, training, HSE coordination and community liaison.

Chemical engineer with process experience wanting to enter into the oil and gas industry.

IT manager with over 15 years experience in the design, development and implementation of information systems within the Oil industry. Energetic, creative team player who consistently exceeds expectations.

I am organized and detail-oriented, work well under pressure and deadlines, enjoy working with a variety of people. I also have a great attitude and enjoy working in a creative, challenging and growth-oriented working environment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 [ 126 ] 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out