Resume - Installation,Commissioning ,Maintenance of process instrumentation -oil and gas ...

Misco Jobs

Resume #58922

CONTACT INFORMATION:
View contact information...

Confirm availability
Dear Hiring Manager,
Greetings from Vishnu Jadhav.

I just wanted to touch base with you in respect to the available/reading position within your organization or business circle. As there could be a close match between the position requirements and my skills and experience. I've attached my resume for your convenience.
Please note my particular strengths and differentiators:

* Extensive experience in installation, commissioning and maintenance experience including calibration, loop testing, function testing of process instrumentation in oil and gas based plants and facilities with a range of companies; KRIBHCO & GSFC - companies in India and QGPC, QATAR GAS, ADGAS, GASCO, FERTIL, KNPC and GPIC - petrochemicals and Gas plants in Middle East.
* I have 10 plus years of experience hands-on experience with different assignment, like, pre-to-post commissioning, shut-down, start-up and modification activities.
* Proven skills in organizing and planning - good go-getter and achiever - considered very dependable and delivers on commitments would be an asset in this role.
* I am Canadian resident, pleased to confirm my immediately and am flexible to relocation or rotational assignment.
* My resume can be available on the following page:
http://www.rigzone.com/jobs/resume.asp?r_id=47336
* Availability ¡V Immediate [2-4 week's notice preferred]
* Expected Salary ¡V As per rule
* Nationality ¡VIndian [Canadian resident]
If possible, alternatively, would you prefer to refer my candidature to any of sub-contracting /associated Companies in your business network? As I am prepared to accept any other domestic /international contract assignment for short/long term as well. Kindly find me answerable for possible concern of probable assignment. I am open and flexible with salary expectation considering preference of long term or rotational job assignment.

I hope things must be going in expected manner and very soon we will have some prospective favor from the authorities. Kindly advice at your earliest. I am pleased to confirm my immediate availability for your prospective favor. Expecting your response sooner.
Your kindness is greatly appreciated.
Thank you in advance.
Warm regards,

__________________________________
ƒÀ Consider the environment. Please don't print this e-mail unless you really need to.

_________________________________________________________________________________________

Vishnu Kumar Jadhav

110, Polar bay, Fort McMurray T9K 2W1 AB Canada.

June05, 2007.

To,
Human Resources,

Instrument Technician

To whom it may concern

I am very interested to discuss possible opportunities within your organization. I think my background and experience will enable you to decide about the suitability against the available/reading positions.

Of particular note for you as consider my skills are my strong accomplishments in Pre-commissioning, commissioning experience on major contracts assignments includes installation, calibration, loop testing, function testing of Control Systems & Field Instrumentation to achieve improved operating efficiency of plant /facilities process as a whole. Additionally, this have been enhanced by services, and improving cooperation between management and staff during my association with range of companies like ; KRIBHCO,GSFC & FERTIL [Fertilizers companies] and QGPC, QATAR GAS, ADGAS, GASCO,, KNPC and GPIC in Middle East.

After 10 plus years, I have a good understanding of the major aspects of Instrumentation and control businesses. Since my active association with one of the largest gas based fertilizer company. All my previous employers are very happy with my performance, but I view myself as somewhat of a trouble-shooter, and most of the reorganizations initiated here have already come to fruition, so I am eager to consider new challenges. Supporting my technical excellence, demonstrated total commitment to values including safety, quality, ethics and controls. As an open communicator, my ability to build sound working relationships has allowed me to work effectively within a strong team based culture.

If you are seeking a talented individual who stays abreast of his field, who understands the importance of a safe and healthy work environment, A quick learner and flexible to varying work loads and dynamic priorities, always keen to have "Continuous Improvement" philosophy to daily work and who is as career-committed as it takes to achieve total success, then please consider what I have to offer. I would be happy to have a preliminary discussion with you to see if we can establish a mutual interest. Thank you for your attention to my details. I certainly look forward to exploring this further. I am available to start work immediately and am flexible to relocation or rotational assignment

Objective - To obtain a position as Instrumentation Technician that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals

Summary

* Experienced, over 14 years' in installation, commissioning and maintenance with different assignment in Onshore/offshore oil and gas processing plants /facilities.
* active involvement on pre-to-post commissioning, start-up and shut-down assignments under range of companies; KRIBHCO & GSFC,QGPC, QATAR GAS, ADGAS, GASCO, FERTIL, KNPC,GPIC in Middle East.
* Proven skills in organizing and planning - good go-getter and achiever - considered very dependable and delivers on commitments. Familiar with basic computer skills
* A team player who works collaboratively and can thrive in a multi-discipline environment. Organized yet tolerant and patient with evolving work processes. Enjoyed motivating team members and soliciting their input.

Accomplishment

* As a team member, aided in integrity audits of equipment installations/ Commissioning activities and significantly saved the budget cost by 7% in capital cost of the project. Overruns through excellent appraiser abilities and follow up.
* Drive to meet objectives, and developed a history of delivering practical results.
* Strong maintenance foundation including a sound technical knowledge of instruments and their selection.
Key Core Competency
* Executed instrumentation/control system maintenance by following "best practices"
* assessed maintenance activities to ensure that the work is planned and completed in a safe manner
* Conceived innovative and cost effective solutions to problems
* Dedication to safe work and environmental responsibility
* Well developed communication skills, Good organizational skills
* Mentored and supported others. Developed team work and integration with other department,
* Extensive experience in planning and executing instrument maintenance activities
* A good understanding and knowledge for troubleshooting and maintenance of DCS and PLC systems
* Good troubleshooting skills for routine and emergency repair of equipment in area
* Maintained and supported equipment records and repair history
* Ensured that the required maintenance activities are completed that promotes safety as the first priority.
* Foster a spirit of cooperation between technical staff to achieve department and company goals.
* Assistance in the development of the Instrumentation Maintenance Philosophy and Maintenance Procedures.
* Assessed and input into the Instrumentation spare parts requirements for the area on an ongoing basis.
* Plans daily and long-term instrumentation/control maintenance activities.
Learning Credentials

* Red-Seal ¡VCertification for Interprovincial Journeyman Instrumentation from, Govt. of Ontario. Canada[2005]
* Academic evaluation by" World Education Services" Govt. of Ontario, Equivalency Certification,[2004]
* Post secondary technical diploma in Instrumentation from a Govt of India recognized institute [1981]
* Successful completion of an approved apprenticeship program as Instrument Technician, GSFC, India.[81-83]
* Successful completion of Company Training. as a Junior Tech-Inst at KRIBHCO. India [1983-85].
* Current Safety certification in H2S Alive, CSTS [incl. WHMIS], Standard first aid, fall protection.
* A working knowledge of Microsoft Excel and Word. Commenced using CMMS,TDoc,
* Basic Safety orientation courses completed.

Vishnu Jadhav +1-780-880-6041[Cell]
Career Track

Employer: Syncrude Canada limited Title: Instrument Technician Location: Canada Duration: 02/2006 to 05/2007

Job Duties: * UPGRADING ¡Vmaintenance-Instrumentation.
* Active participation and contribution in day-to-day activities.
* Extended Instrumentation support to operations. Responsible for maintenance of all instrumentation systems.
* Followed the development and ongoing improvement of the plant maintenance integrity program.
* Commenced, using the CMMS ensuring accurate data input for the historical reporting on actions,

Employer: Gayatri Engineering Title: Foreman-Instrument Location: Baroda,, India Duration: 05/2000 - 05/2004

Job Duties: * Responsible for Project/Modification/S-D jobs and general maintenance.
* Kept continuity [2000-2004] & upon mutual approval from the employer to attend short term assignment in Middle East [2001 & 2002] in line with company's professional interest. Delegated work to subordinates with pre-determined priorities.
* Provided feed back upon completion Involved in for Project, Modification, S-D jobs and general maintenance.

Employer: ADGAS ¡V Das Island, Abu Dhabi, UAE [Off Shore] Title: Instrument Technician
Location: Abu Dhabi United Arab Emirates Duration: 2001 & 2002

Job Duties: Special Assignment-Responsible for Shutdown/Modification Jobs.
* Pre & post S/D activities of offshore facilities & ensured smooth start-up modifications and up gradation of existing systems of their LNG process trains II & I. Associated in development of commissioning -DCS SystemsTDC3000,
* Achieved business unit goals in the equipment reliability/availability. Maintained an error free execution. Paid very close attention to details and executes work to the highest possible standard.

Employer: KNPC Title: Foreman-PCI Location: Kuwait, Kuwait Duration: 11/2002 - 11/2002
Job Duties: Foreman ¡V Process Control Instrumentation [On Special assignment]
* Field activities on Sulphur recover unit. Overhauling of control valves. Field instruments. Trip testing
* Provide technical and hands on support as required

Employer: Qatar Gas & Qatar General petroleum corporation, Halul island [Off shore] Title: Instrument Technician
Location: Doha,, Qatar Duration: 1999 & 2000

* Associated with Qcon [Former Mecon, Qatar] Instrumentation Technician [Special assignment]
* Actively participated in modifications and new equipment installation.
* Involved in Rotating equipments control like vibration monitoring, antisurge control, & other control system.
* Assisted in the preparation of Engineering drawings, cable schedule, Instrument hook-up drawings, Loop diagrams, Functional logic diagrams and Instrument location plan. Installation details, location drawings,

Employer: Abu Dhabi Gas Industries¡VGASCO Buhasha, Abu Dhabi Title: Instrument Technician
Location: Abu Dhabi, United Arab Emirates Duration: 06/1996 - 09/1997

* Preventive/Predictive/Emergency maintenance of NGL plants, including Gas Oil separation plants [GOSP] and other utilities. Also worked on Rolls-Royce AVON and its control system. Met the production targets
* Maintenance activities on Vibration monitoring system of rotating machines, PLC and ESD systems, DCS (Honeywell TDC 3000) relay logic systems, turbine controls, and different control valves. Anti-surge controls.

Employer: Krishak Bharti Co-operative limited¡V Kribhco Fertilizer, Title: Senior Technician -Instrumentation
Location: Surat,, India Duration: 03/1983 - 09/1996

* Joined as a Junior Technician-Instrument trainee and elevated to the position of Senior Technician-(Instrumentation) Key player In the Installation and Commissioning of all control and safety systems. Mainly steam drum control, reformer control, different high pressure compressor control system of highly sophisticated plant process [Ammonia] provided by "M.W.Kellog, USA".
* Liaise with operations departments and supervise vendor personnel. Provided technical support to Siemens Teleprem-XP-DCS applications. Field progress inspection, review & follow up as per punch list /drawing.
* Periodic review of preventative/predictive maintenance programs to reduce unplanned shutdowns and improve overall plant on stream capability scope. Verification and identification of Punch Lists items, Read & Interpret Design Drawings such as P&IDs.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 9906)

Go to Search Parameters...

Brief Description

Oil wells,oil process,gas dehydration,control room DCS,storage & dispatching etc

Rotating Equipment Engineer

Principal Process Engineer (B Eng - Chem), (M Eng - currently enrolled), 12 years design experience worked in RSA, USA, UK

I have graduated from the University of Khartoum and got my M.Sc. there among my carrers since then is working as a mud logger and a wellsite geological supervisor

Senior mechanical draftsman

Seeking middle level managerial assignments in the domain of Procurement / Materials Management to excel with organization of repute.

i am chemical engineer and have 11 years experience

Qualification:DIPLOMA IN MECHANICAL ENGINEERING;Iam having 18 years experience (10 years in Gulf + 8 years in India) in the field of Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.

Landmark Drilling Consultant seeking international position with 28 and 28 rotation.

Over 14 years of experience covering industries of Engineering, Oil & Gas , Chemical industry, Offshore and Space Industry in the fields of Quality Surveillance, Project site Inspection & Management, Product certification (ATEX, MD, PED, RoHs, WEEE), Type approvals, WPS/PQR & WPQR approvals, Coatin

16 yrs. plus Instrument & Control Maintenance & Engineering experience in Gas & Petrochemical Industries, Copper Smelter & Refinery, Aviation Air Defence & Telecommunication systems.

IT with expertise in systems business analysis, database management, ERP implementation & support

Business and Customer focused team player, qualified engineer and lead auditor specializing in Quality solutions for project and corporate applications

Planning Engineer

Batchelor Degree, Chemistry with 17 years of exeperince in Process Industry

Installation,Commissioning ,Maintenance of process instrumentation -oil and gas based plants/facilities[onshore/offshore]

I am enclosing a copy of my resume in hopes you will consider me for a Petrophysicist position with your company. I believe that my petroleum engineering, petrophysical interpretation, and reservoir characterization background are a good fit for the qualifications needed the petrophysicist position

Business unit management to include multiple sites

Wellsite Geologist onshore and offshore drilling rigs.

Procurement Manager

I am diploma in mechanical engineering having 15 years experience in refinery,chemical,oilfield offshore in mechanical maintenance ,various rotating equipemnts gas turbines steam turbines gas centrifugal compressors and various pumps and stationary equipments.

Instrument & Control Services with Computing Machines and Devices Engineering Degree.

IIW Intrnational Welding engineer, Ph.D on mechanical Engineering, Osaka Uni.,

BACHELOR OF ELECTRICAL ENGINEERING (FULL TIME 4 YEAR PROGRAM) & POST GRADUATE ADVANCED DIPLOMA IN MAGAMENT , EXPERT IN SOLAR, ABB STAL, KAWASAKI GAS TURBINE OPERATION & MAINTENANCE, ALSO THOROUGH IN EXTRA HIGH VOLTAGE(EHV) POWER SYSTEM OPERATION AND MAINTENANCE

Regarding Gas & LNG Systems, I have broad knowledge in the maintenance, operation, construction and commissioning for Gas compression, transmissions and LNG extraction, production, distribution and shipping plants gained in the different business units at Gov´t Oil&Gas Company.

Ability to work hard with sincerity and cool temperament, good communication skills, self motivated, Ability to face practical challenges, Good team player and willingness to learn, able to suit fast to a new subject and environment and responsibilities.

Electrical Systems that includes DC, AC LV/MV/HV

Experience in Blasting and painting more 10 years,

Mechanical Engineer specialized in welding/Piping /NDT/ Equipments Inspection having 16 years (India & Middle East) experience in QA/QC activities of Construction / Fabrication Industry in the fields of oil and gas sectors , LNG Projects in Process Piping , expansion of live plants, Power Piping,

Piping stress engineer

I have experience in mud logging since 7+ years, both national and international, presently working in gabon as data engg in geolog international company, i have studied MSc., Applied geology, i was work in vertical/directional/drain hole.

Officer - Finance & Accounts

Good Keyboard Skills, Computer Literacy, Fully Competent with Surveying Projects from small repairs to full Power House Rebuilds, Competent with World Travel meting Foreign Nationals using tact & diplomacy with all customers, Capable of working within a team or on my own, Competent in training Forei

14 years of experience as a Contracts Engineer, Contracts Administrator

I am an Electronics Engineer & working in Instrumentation Field.

I am a Petroleum Engineer with BSC degree. I am working at Oasis( Waha) Oil company for about 14 years. I worked in many section drilling & Workover as Company man on rigs, supervisor at Waha office, Production operator, foreman, Prod Supvr. 28 weeks Drillg & Prod. in U.K, 4 weeks Hor. Drlg Canada

Graduate in chemistry having 17yrs experience in the field of refinery operation including 12yrs overseas experience,currently working SaudiAramco-ExxonMobil refinery in yanbu,saudi arabia,having experience in precommissioning,commissioning and start up of the refinery, looking for a suitable job.

A professional and experienced Petroleum Geologist having 25 years of varied experience in Upstream oil industry. Developed expertise in Basin modelling and Sequence stratigraphy, operations and administration . A team player can deliver results with best time mangement

12 years experience in Chemical, Fertilizers and Petrochemical industries in Electrical Maintenance & Testing and Maintenance Planning. I am an excellent technical writer and presenter my paper “Concept of Electrical Energy Conservation & Improvement in Equipment Design” in Middle East Petrotech'06

Planning Engineer, construction, commissioning, maintenance planner, shutdown, TAR.

Instruement Maintenace Engineer, Very good team player, willing to hard work, good experience in oil/gas field

Drilling Engineer, DEepwater, ERD wells, Directional drilling, Well Engineer

I currently hold the position of Marine Superintendent for BP Americas. I have an OIM license with Barge Supervisor endorsement.

in the field of planning and good in primavera

Power Plant Piping Detail Engineering Design deleverables.

My experience as an Instrumentation and control Engineer for nearly Eleven years has given me good exposure in Designing, Project work, Proposal, Erection and Commissioning assistance for Instrumentation and Control System with participation in HAZOP and SIL studies.

Career start in 1990, 17 over years experience in piping design for Oil & Gas industry (Offshore & Onshore)

QA/QC Inspector (Painting/Coating).

Document Controller, Manage all Project official documentation (includes engineering and vendors)

) DIPLOMA IN CIVIL ENGG. Completed (while working) in JUNE 1997 from M. H. Saboo Siddique Polytechnic• Auto CAD 2007 & Above, Framework Plus 07.03,Plant Design System (PDS), Microstation 7.01

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out