Resume - my expertise are using any release of autocad, rhinoceros for 3d and GHS for sta...

Misco Jobs

Resume #59296

CONTACT INFORMATION:
View contact information...

WORKING EXPERIECED

TECHNICAL STAFF / AutoCAD DRAFTSMAN
TIMES MARINE SURVEY L.L.C.
P.O. BOX 7280, Sharjah, United Arab Emirates
02 March 2006 up to present

Sphere of Duty:
* Prepare Structural, Electrical, Mechanical presentation, conceptual, class and production drawings.
* Calculate Trim and Stability of boat using Rhinoceros and General Hydrostatic (GHS) Program.
* Ensure the drawings are prepared according to the Client, Class, Regulatory requirements and internationally accepted marine standards.
* Recommends to the Section Head any required additional information or date that are to be acquired from the client.
* Assist Section Head in rectification of non-conforming drawings and calculations.
* Assist the Section Head in administering the company rules and regulations.
* Conduct onboard survey, inspection of vessels, structures preparatory to development of production and fabrication drawings.
* Prepare ship's lines drawing and offset table.
* Provide 3D Model for vessel presentation using "Rhinoceros" software.
* Assist the Section Head in the Supervision of Trainee Technical Staff.
* Conducts preliminary review of drawings prepare by Trainee Technical Staff.
* Provide technical support to the other Department as may be required.

Senior AutoCAD DRAFTSMAN
OCEAN PACIFICO SERVICES, INC.
Bldg. 41 South Bravo Wharf Subic Bay Freeport Zone, Olongapo City 2000 Philippines
23 July 2004 28 February 2006

Sphere of Duty:
* Layout pipe installation for every system.
* Prepare bill of materials for fabrication of piping lines.
* Supervise as per instruction for fabrication of pipelines.
* Layout Engine Room Arrangement.
* Design typical drawing details of the ship.
* Revise mechanical and structural drawings for Lloyd's approval.
* Coordinate to the Shipyard Manager regarding on drawing revisions.
* Instruct the handled personnel regarding the drawing revisions.
* Inform the production supervisor about the design drawing issued.

AutoCAD DRAFTSMAN
OCEAN PACIFICO SERVICES, INC.
Bldg. 41 South Bravo Wharf Subic Bay Freeport Zone, Olongapo City 2000 Philippines
06 October 2003 to 22 July 2004

Sphere of Duty:
* Updates and revise Superstructure and Construction drawings.
* Sketch rush drawings for fabrication
* Discuss the drawing revisions to my immediate supervisor.
* Draw some as-built details for certification.
* Layout the interior design in the ship.
* Do other duties as assigned.

TECHNICAL DRAFTSMAN
POLARMARINE INC.
Bldg. 8487, Naval Magazine, SBMA Freeport Zone, Olongapo City 2000 Philippines
16 July 2002 to 04 October 2003

Sphere of Duty:
* Update drawing plans for Tank Cleaning Machine.
* Make instructional drawing for Polarjet Manuals.
* Draw new plans of Polarjet for machining.
* Draw and revise exploded view of Polarjet.
* Update production drawing master list.
* Make and adjust shadow diagrams.
* Create three-dimensional (3D) drawing for presentation.
* Do other duties as assigned.

AutoCAD OPERATOR/DRAFTSMAN
C. LAMIRA DESIGN & TRADING
Tuyo, Balanga city, Province of Bataan, 2100 Philippines
06 April 2001 to 10 May 2002

Sphere of Duty:
* Produce complete working drawings.
* Produce scheme drawings for housing projects.
* Provide technical support in Computer Aided Design.
* Assist in conducting field surveys for some projects.

EDUCATIONAL ATTAINMENTS

BACHELOR OF SCIENCE IN INDUSTRIAL TECHNOLOGY
Major in DRAFTING TECHNOLOGY
Bataan Polytechnic State College
27 March 2001

BACHELOR OF ARTS IN SECONDARY EDUCATION (Units)
Bataan Central College
22 March 2002

TRAININGS

ON-THE-JOB TRAINING
DRAFTSMAN / OFFICE CLERK
Petrochemicals Corporation of Asia Pacific
Batangas 2, Mariveles, Bataan
24 July 2000 to 09 February 2001

BASIC COMPUTER AIDED DESIGN
Bataan Polytechnic State College
Balanga City, Province of Bataan
09 to 16 May 2000

COMPUTER KNOWLEDGE

* Operate AutoCAD R14, R2000, & R2002 to R2005.
* 3D Modeling using Rhinoceros software.
* Photo editing with Adobe Photoshop.
* General Hydrostatic (GHS): Software to calculate trim & stability of ships.
* Microsoft Office.

OTHERS

Passport No.: KK601573

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5801 to 5850 of 10910)

Go to Search Parameters...

Brief Description

I have 5 yrs experience in the Oil Industry, 3 of those years were in Operations where I Utilized Total Quality and Safety Management Principles to operate successfully in a stressful, fast-paced, deadline-oriented, ¡§no errors¡¨ environment.

Experience in Project Management and Marine Construction

Planning, Scheduling, Project Controls

Piping engineering-layouts/specification/plot plan/isometrics

Production operator at oil and gas company, experiences more than 8 years, 12 years education ( technical high school)

NEBOSH- International General Certificate in Occupational Health and Safety(United Kingdom) Abu Dhabi

Versatile IT Project Manager with > 15 yrs experience in the IT and Upstream Petroleum Industry implementing IT solutions (including software, hardware, firmware);evaluating and recommending solution options, supervising solution implementation, and QA. Able to deliver Projects on time and on budget

Subsea Project Engineer - Project Management - Deep Water Installation

Twelve (12) years of diversified working experience in Quantity Surveying/Measurement, Cost Estimation, Cost Control/Monitoring and Contract Administration of miscellaneous projects relevant to Oil & Gas and Petrochemical Industries.

Resume - Nilesh Roy - Service Delivery Manager - IT Infrastructure - 12+ years of experience.

Operation and maintenance of Boilers, combined cycle gas turbine power plants, and utility services

Procurement/Supply Chain/Materials Management

I am a hard working guy and just need a chance to show my skill.I have a lot of interest in designing field and simulation.I have done a ^ month course in Simulation and design and also in polymer engineering and petroleum industry course.

I have worked on and in many different environments. I'm outgoing and follow all saftey rules and regulations.

PRODUCTION PROFILE

my theoretical skills in drilling engineering is very nice.i can speak with english,kurdish and persion

8 years experience in downstream logistics. Developed logistical planning for crude oil transportation via Caspian Sea to Black Sea ports, good communication skills. Demurrage claim settlements, reduced third party demurrage claims by $3 million during 4 years.

Currently a Cryogenic gas plant operator 3 yrs. Well Head compression experience 1yr. Associates Degree in Electronic Instrumentation and Control.

b.sc with first class and 2.8 years of experience in chemical/petrochem industry

Graduated from Geological Engineering, Faculty of Earth and Energy Technology, Trisakti University Jakarta in August 2008 with cumulative grade point average (GPA): 3.14 (scale from 0 to 4). My organization experience as membership of Gathering Student Board of Geology in Trisakti University

Competency in developing HSE Management system and conducting compliance audits, advising on HSE requirements & statutory compliance.

Marine engineer seastaff 15 years/eng superintendent 5 years/ operations manager 4 years/ technical manager 4 years

Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance

I'm a diploma holder in Chemical technology having 12 yrs of experience in petrochemical field worked as Junior Engineer in Ammonia synthesis plant of all sections of desulphurization, catalytic reforming,CO2 removal, synthesis reactor, refrigeration, ammonia storage with adequate HSE practices

I am a mechanical technician I can do all rotary and stationary equipment jobs.

my expertise are using any release of autocad, rhinoceros for 3d and GHS for stability calculation.

Degree and diploma in chemical engineering.

Experienced in developing and delivering drilling plans, including wellbore and casing design,mud program,cementing program, directional plan, completion design, leading risk assessments, developing safety programs for workover, drilling and completion operations on exploration and development wells

I have been in Customer service Line since 10 years. I have experince towards handling customers and solving the inquiries as well. Further more my qualification are until SPM but the working experince towards this line giving me a lot of opportunity to built up my career.

Holder of the diploma in safety and health and certified in indsutrial hygiene management, holder of the NEBOSH certifcate in OSH

Self-motivated with experience in field of instruments, process, oil&gas valve and actuator control system. Knowledge, understanding and interesting in variety of control systems such as DCS, PLC, SCADA, and MARK series.

Microstation, AutoCad, Electrical Utility as well as Residential/Commercial, Pipeline Drafting and GIS

Mechanical engineer with 13 month experince in production

I studied B.E.,in Instrumentation and control Engineering with 75% and First class with Distinction

Registered Nurse with one year working experience in different special areas like ICU,EMERGENCY DEPARTMENT,RECOVERY ROOM,SURGICAL AND MEDICAL WARD

I have worked as a drilling supervisor for 5 years and at the moment for 1.5 year work as a completion and drilling material specialist for national iranian oil company. I am ready to relocate internationally regarding to job situation.

Mechanical Design Engineer for Oil and Gas with 10 yrs exp. for EPC companies

Paint Inspector/Supervisor

Electrical and instrument project manager construction, design and inspection

Open Hole LWD Logging and log analysis, M.Tech (Applied Geology)

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Presently working with ConocoPhillips Syria Dez.Gas Ltd. since April 2002 as a Senior Warehouse & Procurement Supervisor in Syria (Middle East) on 28 Days ON/OFF schedules through GMOS (MSI). Job Profile: Responsible overall for all aspects of materials including warehousing, procurement operations

Working In the Oil and Gas Drilling Industry Since 1986 Looking for a company that wants its employers to look after it !!

Rotating Equipment Mechanical Engineer

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Education: Bachelor Degree in Economics

Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness calculation, pressure balance in PIPENET software, etc

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 [ 117 ] 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out