Resume - PROCESS ENGINEERING OF OIL AND GAS PROJECTS

Misco Jobs

Resume #5935

CONTACT INFORMATION:
View contact information...

SPECIALISATION: Process Engineering

DATE OF BIRTH: 25th September 1967.

NATIONALITY / SEX: Indian / Male.

QUALIFICATION: Bachelor of Chemical Engineering
(1991) from Jadavpur University with First
Class Honours.

PROFESSIONAL ADD ON: PG Certification in Computer application
From CMC Ltd.

ORGANISATIONS WORKED IN

: I) Balmer Lawrie & Co Ltd as Deputy Manager (Projects) from June 1997 - till date

: II) Development Consultants Ltd as Senior Design Engineer from March 1992 to May 1997

: III) Dunlop India Ltd as Management Trainee from June 1991 to February 1992

NATURE OF PROJECTS HANDLED
: Gas Gathering Stations (GGS)
: Lubricating Oil Blending Plants ( LOBP)
: Liquified Petroleum Gas (LPG) Bottling Plants
: Petroleum, Oil & Lubricants (POL) Depots
: Grease Plants
: Hydrochloric Acid Regeneration Plants

PROJECTWISE ASSIGNMENTS

A) Projectwise Assignments- WITH BALMER LAWRIE AND CO. LTD

A1. PROCESS ENGINEERING ACTIVITIES

A1.1 For Gas Gathering Stations

(5 Nos of Such Projects Handled namely GGS of ONGC at Kovilkalappal, Kuthalam, GGS IV, VII, VIII at Gujarat)

Entire Pre-Bid Engineering during competitive bidding

On-award of Contract

* Development of P&I Diagrams for Main Process and Utilities from Process Flow diagrams.

* Preparation of P& Ids for Water Injection Systems.

* Carrying out Material Balances

* Selection & Sizing of Gas-Liquid Separators using LV-soft software programs

* Preparation of Data Sheets for main process equipment like Separators, Pumps, Demisters etc.

* Preparation of Line Schedules.

* Preparation of Flare Load Charts. P& ID of Flare System. Design of Flare Systems comprising sizing of Flare Header, Flare Stack, Knockout drums etc.

* Pipe Sizing & Pressure Drop Calculations for two phase flow systems using two phase software programs eg PIPEDROP

* Hazard Analysis and Estimation of Fire water requirements based on single largest hazard as per OISD guidelines.

* PSV Sizing Calculations

A) Project wise Assignments- WITH BALMER LAWRIE AND CO. LTD

* Providing Process Input for instrument data sheets

* Thermal Design for Water Bath Heaters

* Review of Vendor Drawings/ Documentations for Critical equipment like Separators, Demisters, Heater-Treaters

* Vent Sizing For Storage Tanks

A1.2 For Lubricating Oil Blending Plants

(* 3 Nos of Such Projects Handled namely 60,0000 MTPA LOBP of HPCL at Silvassa, 50,000 MTPA Aviation LOBP of IOCL at Faridabad, 20,000 MTPA LOBP of IBP Co. Limited at Budge Budge, 60,000 MTPA of M/s Emirates Lube Oil Co (ELCO)

* Preparation of Entire Basic Engineering Document and Process Design Basis

* Estimation of Utility Requirements like Steam, Cooling Water and Compressed Air.

* Preparation of P&I Diagrams for Main Process and Utilities.

* Thermal Design and Estimation of Heat Transfer Area Requirements for Batch Blending (Heating & Cooling Operations)

* Estimation of Agitator Power Requirements for mixing and blending operations.

* Design of Agitators for Blending Operations

* Preparation of Data Sheets for main process equipment like Blending Kettles, Pumps, Heat Exchangers.

* Design of Socony Mixers / Eductors for recirculatory Tank Mixing.

* Preparation of Batch Cycle Time Charts for Batch Blending

A) Projectwise Assignments- WITH BALMER LAWRIE AND CO. LTD

* Thermal Design for Tank Suction Heaters & Bayonet Exchangers

* Pipe Sizing & Pressure Drop Calculations

* Sizing of Tank Heating Coils.

* Preparation of Line Schedules

* Vendor Drawing review for main process equipment

A1.3 For LPG Bottling Plants

(*5 nos such Projects handled namely LPG Bottling Plants (22000 MTPA) of M/s IOCL at Bokaro, Jharsuguda, Guna, Erode & Malda)

* Hazard Analysis and Calculations of Fire Water Requirements as per Oil Industry Safety Directorate (OISD) guidelines, Fire Protection Engineering including Network Analysis of Fire Hydrants by Hardy Cross Method.

*Preparation of P&I Diagrams for main process & Utilities

* NPSH Calculations for LPG Pump Design

*Pipe Sizing

* Safety Valve Sizing

* Preparation of Data Sheets for LPG Pumps

* Preparation of Line Schedules

A1.4 For Grease Manufacturing Plants

(*3 nos such Projects handled namely Inhouse Grease Plants at Silvassa, Calcutta and Chennai, Grease Plant for ELCO)

* Preparation of Material Balance and Energy Balance for Emirates Lube Oil Company (Elco)

* Estimation of Utility Requirements like Thermic Fluid and Air

* Preparation of P&I Diagrams for process and Utilities

* Preparation of Grease Formulation packages for ELCO

A2. OTHER ENGINEERING INCLUDING PROJECT ENGG ACTIVITIES

Have carried out project engineering activities as support for project exigencies eg. Tendering, tender evaluation and ordering, preparation of RFQs, purchase requisitions interfacial engineering, mechanical design of pressure vessels (bullets)

B) Projectwise Assignments- WITH DEVELOPMENT CONSULTANTS. LTD

B1 PROCESS ENGINEERING JOBS

B1.1 Hydrochloric Acid Regeneration Plants

* Was Involved is HCL Regeneration cum Synthetic Ferric Oxide plant of M/s Associated Cement Companies at West Bengal and Tinplate Company of India

* Review of P& Ids given by Process Collaborator

* Review of Material & Energy Balances given by Process Collaborator

* Preparation of Data Sheets for process equipment eg Absorbers, Venturi Separators, Tower Packings

* Hazard Analysis for acid handling plant

C) EXPERIENCE- WITH DUNLOP INDIA LIMITED

Was involved in cycles of Production, Maintenance, Industrial Engineering, Planning, Engineering Services as a Management Trainee at Dunlopâ€™s Rubber tyre and Industrial Rubber Product Manufacturing Unit at Sahagunje, West Bengal

SITE EXPERIENCE

- Was deputed to Grease Plant at Silvassa & Calcutta for involvement in the entire Construction Cycle of Mechanical Erection & Piping,Hydrotesting of Pipelines and Tanks, Precommissioning and Commissioning

- Was deputed to LPG Bottling Plant at Bokaro & Malda for involvement in the entire Construction Cycle of Mechanical
Erection ( eg Bullets, Horton Spheres, LPG Pumps, 20 M Dia Tanks, Air Compressor, Air Dryer, Conveyors), Pipieline (with 100 % Radiography, WPS, PQR, Welder Qualification at 6G
SITE EXPERIENCE

etc), Erection of Fire Protection items (like Fire Engines, Piping Network,Hydrants, Monitors ),Valves, On-line Instruments, Hydrotesting and Pre-commissioning Check up, Gas â€"In and commissioning etc

CODES AND STANDARDS USED

Oil Industry Safety Directorate (OISD)

ASME Boiler And Pressure Vessel Code Section VIII,IX

IS 803, API 650, API 620 for tanks

API RP- 520, 521

Tubular Exchanger Manufactures Association (TEMA)

ANSI B 16.5 (Flanges), B 16.9 (Butt Welded Fittings), B 16.11 (Socket Welded Fittings) & other related ANSI std

IS 875 (Wind), IS 1893 (Seismic)

Process Heat Transfer ( By DQ Kern)

SOFTWARE USED

LV-Soft for Separator design, PIPEDROP, MS Word, Excel, Autocad, Primavera, Network Analysis Software, In-house Pipe size Software, Design II for windows, Piping Systems Fluid Flow etc

PERSONAL

Hardworking, Team player, Proficient in English, Likes to achieve targets with stringent deadlines

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5201 to 5250 of 10923)

Go to Search Parameters...

Brief Description

Geophysicist. Current area - Exploration Seismology. Strong experience in Geophysical Data Processing, Theory of Polarization Anomalies, Numerical Modeling.

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

adaptability, flexibility, coputer knowledge

DEsign Engg., PLC, SCADA, I&C work Experience

Skills include Petroleum Engineering,reservoir Engineering,Petroelum Geoscience,Geochemist,Mud Logging

I have recently completed M. Sc. in Petroleum Technology, from University of Karachi.

Pipe rack design, routing of pipes on rack, Preparation of Tank farm Layout in detail and piping layout for the same from the process point of view. Preparation of detailed piping layout, Equipment layout, General Arrangement drawings, Isometric checking.Isometric drawing preparation

I have been working construction in the Petroleum/Oil/Gas field for the past three years. I have done turnarounds and capital work.

Cogeneration, gas engines

• Results-driven, logical and methodical approach to achieving tasks and objectives

Wide experiences in Occupational Health, Safety and Environment, advisor to the employer on the measures taken in the interest of the safety and Health of persons employed in the place of work. Inspect the place of work to determine whether any machinery, plant equipment substance.

2.6 year of experience in Detailed Engineering work of the refinery units helped me understand the profile and the responsibilities of a mechanical engineer (Static) and to realize how important this field is to the oil refining business and I have learned how important it is to be flexible.

Highly personable Drilling Fluids Engineer with over three years of experience in laboratory work, project supervision, logistic services both air and land logistics and mud engineering.• Proficient with Microsoft Office System (including Microsoft Word, Microsoft Excel, Microsoft PowerPoint®, Micro

Project Planning & Control Engineer / Scheduler / Earned Value System Designing and Development/Primavera Group Software Developer/I have been working in Engineering and Construction phases of EPC oil, gas and petrochemical projects/PMP (Project Management Professional)/Project Planning & Control

I am a certified lead auditor in ISO ¡V 9001, OHSAS 18001, ISO 14001 standards.

Monitor daily well progress; provide verbal and written technical input as required to well operations/production department, Prepare well supplemental programs and specifications.

opweration, commissioning,refinery, LNG unloading, termonal operation, plant operator, refinery operator,

Title research and Ownership Reports, Deed Plotting and Runsheet Preparation

Long experienced man, good language skills, oil field experiences and certified as a radio officer, ready to work in the worldwide.

SAP HR Implementation, Recruitment, Training, Compensation Management, employee Relation, Performance management

A chemical process engineer with 12 years experience in oil refining and petrochemical industries

Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL, Abu Dhabi. Has experience in the maintenance of Rotary Machinery like pumps, compressors, turbines, etc. and stationery equipments like heat exchangers, columns, vessels and piping. Has computer knowledge.

Skilled in all planning shutdown, shutdown supervision, servicing, modifications design and total project cost control, mainly in power stations and refineries

Pipeline, Pipe Stress, Piping or MEchanical Engineer

Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, PowerPoint), Training The Junior Process Engineers & Process Technicians

A professional electrical engineer; more than eight years of active experience in electricity sector of Pakistan in controls, protection, SCADA. BSc Elect. Engg.; MSc Controls; MBA. Has also worked in Northern Electric plc, UK. Technically competent; has ability for business and financial analysis.

OBJECTIVE A challenging position in managerial level QUALIFICATION FOR THE JOB Good education and fully experienced with engineering and management duties,, have initiative and willing to accept engineering responsibilities.

: PROJECT ENGINEER //SENIOR ENGINEER /ELECTRICAL -- ENGG./(DESIGNS)/PROC./CONSTRUCTION/SUPN./O & M OIL/GAS/PETROCHEMICAL INDUSTRIES ETC.

12 yrs exp in Chemical Industry . strong academic background B.E. Chem +ICWA+LLB+MM (AIM, Philippines) seeking for a suitable opening

cnc turn mill machinist setter

JR. PDS DESIGNER PIPING WORKING FOR WELLCOMPANY IN MUMBAI ON PDS FOR PIPING. GOOD EXPERIANCE OF PIPING.REFER DETAIL BIODATA.

This is the Drafts man C.V for Zueitina Oil Company, Libia.

Please see attached cv regarding your procurement requirements

PROCESS ENGINEERING OF OIL AND GAS PROJECTS

OBJECTIVE To secure a position with a corporation wherein I can apply the skills, knowledge and expertise obtained during my 18 years in the Health & Safety and Emergency Response fields.

Well Services Engineer/Supervisor

Highly skilled hydraulic engineer with 12 years of experience in the field of producing energy, maintenance , commissioning and start-up operations within multi millions contracts. Knowledge and experience in working with international teams.

I’m a civil engineer with studies in HSEQ, I have worked at Cusiana and Cupiagua Oil and Gas CPFs, I have been working for the past 6 years in HSEQ areas an I´m free to go wherever the job is. I speak Spanish as a mother tongue and have good English skills.

A recent graduate from Ohio University with a Master of Science degree in geological sciences is looking for a career in research, development and application of advanced geological processes related to petroleum and mineral exploration.

Application for the post of Control & Instrumentation Engineer. post graduate in Instrumentation engineering having more than 9 years of experience in automation Oil & Gas, Petrochemical and Fertilizers projects.

A highly skilled and very experienced Supply Chain Professional with over 15 year’s expertise in Procurement, Logistics and Materials Control in Europe and mainly overseas. Acclimatised to work with varying cultures in diverse countries world wide.

Senior Structural Designer in the Oil and Gas industry with experience of PDMS, Micro station and AutoCAD

• Drilling Engineer - Oil and Gas Drilling Wells Planning; • Rig operations experience; • GPS units, GIS’s methods and procedures; • Manage/coordinate teams of 15+; • Software programming knowledge and experience.

I am highly motivated, self-starter, team player and resourceful. I have worked in harsh conditions and adapt easily to any situation. I have just finished working in Iraq on the RIO recover Iraq Oil project for KBR. Prior to that I worked in Chad on the ExxonMobil Oil Recovery Project.

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

I am having Diploma in Petrochemicals technology as my basic qualification with 12 years of solid track experience in the field of plant operations in heavy petrochemicals plant i.e. polyethylene plant, and oil & gas terminals. Well conversant with DCS panel of FOXBORO & YOKOGAWA'S CENTUM-XL,

Setup PDMS, customize PDMS program in PML I and II to greatly reduce man-hours. Piping designer, draftsmen, produce drawings, model pipe support and ran pipe. Train others on PDMS.

Dedicated and resourceful geoscientist with three years professional experience in the E&P industry, mainly in (quantitative) seismic interpretation.

Process engineer, Sharif Institute of Technology, B.Sc. Degree, Tehran University, Equipment design, Takestan Industrial Systems Company, Well Engineer, Integrated Project Management, Schlumberger Company, Heriot Watt University, Student of Petroleum Engineering, Voluntary work in Indonesia and Iran

Looking for position of Lead Engineer of Rotating equipment in Design, Engineering and Construction organisations.

First Prev 101 102 103 104 [ 105 ] 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out