Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #59543 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONNAL EXPERIENCE:

Quality Control for Frac fluids, Alberta. SyNoil Fluids, Aug 2006- Now

* Field Testing of Fracturing Fluids for Parameters like: pH, BS&W, RVP, density....etc.
* Supervising Cleaning of flowback Gelled Frac oils.
* Planning and booking third party companies for upcoming jobs.

Coiled Tubing Supervisor, Halliburton, Saudi-Arabia. Oct 2006- June2006

* Running different type of 38 K, 60K, 95K units. Performing on site jobs like Acids, Cleanouts, Logging jobs, Fracturing, Nitrogen Lift,.. etc, plus the ticketing and other maintenance tasks.

Coiled Tubing Supervisor, Halliburton, Red Deer, Canada Feb 2004-Oct 2007

* Coil tubing service Supervisor. 38 K, RT60 PLC mast units, 95K Crown mast units. 95K and 45K conventional Units. Conventional work like Nirtogen lift, Clean outs, heater and siphon strings, acids, fisdhing, Cobra Fracs, CBM N2 Fracs. Ticketing and taking care of all paperwork including road permits.. etc.

Corrosion Tech, Corrosion Service, Montreal Sept 2002-Dec 2003

* Installing Cathodic Protections, Anodes and surveying for corrosion protection systems around pipelines, refineries, gas stations, factories and plants.

Telemarketing in heating and ventilation, Sears, Mtl Jan 2003-Mar 2003

* Taking bilingual phone appointments and data entry on the computer.

Coiled Tubing Drilling, Baker Hughes Inteq, Algeria, Hassi-Messaoud 2001-Aug 2002

* Control the UB horizontal drilling in real-time, rig-up, move and rig-down of both the rig and the camp. Injector used is Hydrarig HR 5100, the CTU has a Parabolic Loop System, PLC controlled Hybrid CTD rig.
* Helped translated weekly safety meetings for the crew from English to French and Arabic.

CT Field Engineer, Schlumberger, Algeria, Hassi 1998-2001

* Well intervention with coiled tubing (stimulation, kick-offs, clean-outs, Acids, logging, rigs,..etc) and ensure that HSE and company standards are met. Using HydraRig Units Like HR60, HR480..etc, both on Mast and crane units.
* Write reports and design well stimulation programs using adequate software.

Telecommunication Eng (PLC and SCADA), SONELGAZ 1995-1998

* Troubleshooting, maintenance and installation of electronic modules for a power utility company telecommunication department.

EDUCATION:

Electronics Engineer Degree – Polytechnic School of Algiers / University of Algiers. 1989-1994
Some post-Graduation not finished ( Data acquisition / signal processing) – University of Algiers. 1994-1995

COURSES ATTENDED:

WellHead Boom Truck and Crane ticket, Enform, Nisku. 2006
Aramco Helicopter Safety – Saudi Arabia. 2007
Coiled Tubing Hydraulics - 95 K System, Red Deer. 2006
Coiled Tubing III, Halliburton, Duncan, Oklahoma. 2006
Coiled Tubing II, Halliburton, Duncan, Oklahoma. 2005
CT Well Service BOP ticket, Enform, Nisku, Canada. 2004
First Aid, H2S, WHMIS, Class1, TDG, Confined space. 2004
Cathodic protection inspection course and safety tickets, Montreal 2003
Well Control School, RandySmith, Houston-USA 2001
G3 Coiled Tubing Drilling Introduction course, BakerHughes, Houston 2001
Coiled Tubing Operational and Technical course OTS2, Schlumberger,UK 2000
Coiled Tubing Operational and Technical course OTS1, Schlumberger,UK 1999

COMPUTER KNOWLEDGE:
* Solid computer basics and a facility for learning softwares and other applications.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7051 to 7100 of 9871)Go to Search Parameters...
Brief Description
Almost 6 years relevant experience in Instrumentation Technology. Having experience in refineries, Petrochemical Plant, Fertilizer Plant & Oil & Gas Plant.
Seeking for an entry level position.
I'm a qualified Aircraft Autopilot maintenance engineer, seeking a challenge in the oil industry. I would like to challenge myself, working with all electronic and related fields.
3rd Class Power Engineer
i am working in the field of painting for 9 years mainly in in application and inspection
industrial maintenance mechanic/millwright ( red seal ) any thing mechanical ,some electrial
Skilled pump technician w/ 4 yrs experience building & repairing down hole pumps incl. insert & tubing pumps. Completed training for field repairs and pump certification (Levels II - well operations & Level III - pump mechanics). Hard-working, good attention to detail. Excellent evaluations.
I am a fresh graduate from the Jordan University of Science and Technology. I have a bachelor's degree in Mechanical Engineering with a minor in Mechatronics Engineering.
GIS Packages: MapInfo Products, AutoDesk Products, ArcGIS,
Well versed in P3e, P3 and MS Projects with very good knowledge of spread sheets and MS Access database. Have experience of Petrochemical, Oil & Gas and Chemical Projects. Have also seccessfully executed few projects as Project Manager.
Highlights of Qualifications: Diploma in Electrical Engineering from Maharaja Sayajirao University of Baroda, Gujarat, India. Registered license holder of Industrial Electrician from Ministry of Training colleges and University, Ontario, Canada (Licenced 442A), Applied for C.E.T. certification to OC
Ten years with major Oil and Gas company; managing,planning ,tracking drilling and completion operations up to 100MM$ AFE. High expertise in Contractual Strategies (Incentived Contracts, Risk reward) Areas of experience are worldwide Off Shore and On Shore.
About Ten years experience with engineering of Oil and Gas project (Process Platform & Well head Platform), Electrical Substation, HV/MV/LV apparatus switchgears/ MCC, MV/ LV Motors, power supply unit, UPS control equipments, Electrical on Mechanical Package (Gas Compressor, Fire Water, Gas Turbine)
Oilfield Supervisor fracturing high pressure
5 years with schlumberger oilfied sevices company as high pressure pump operator
Instrument Tech that is capable of working on most end devices and bend 1/4" to 1/2" SS Tubing
To join a competent and reputed organization and exhibit talent to be promonent as an excellent professional engineer
Oil Field Inspection Specialist (30 year career), experienced in all aspects of plant equipment inspection: Pressure Vessels, Gas fired and Waste Heaters, Tankage, Piping, Pipeline, PSVs, Offshore Platform structures & Cranes. Skilled in Risk Based Inspection & Equipment Strategy procedures.
To acquire a technical/management position where engineering experience and managerial skills will significantly contribute to use the skills obtained through my experience and qualifications to benefit my employer and grow my self with organization.
MASTERS - Mechanical Engineering – [GPA: 3.6 / 4]
BE Chemical with more than 5 Yrs of Experience in Water treatment industries and also Petrolium Industries.
Structural Engineer with broad knowledge on design and analysis of Buildings (concrete and steel structures). Full knowledge in using Computer aided design Software such as Etabs, Staad pro, Prokon, Sap2000, CSI Safe, Xsteel, AutoCAD, Microstation, and other Computer programs (MS Office Word, Excel,
·Languages: Advanced Levels in Arabic, English and French (written and spoken)· Computer Literate: Advanced Levels in MS Word, MS Excel, MS PowerPoint, Internet, Fortran, Pascal, AutoCAD· Technical competency, design experience, communication skills, & problem-solving abilities
10 years Systems Administration experience, wide verity of systems.
Hands on experience in plant maintenance instrumentation as well as commissioning and precommissioning activities of the various chemical and petrochemical plants. Have experience in control valve overhauling, maintenance of transmitters,DCS,PLC etc.
Experienced Professional in Port Operations, Security Operations, Marine Operations, Operations Management, Environmental, Health, and safety, Administration, Logistical, Maintenance, Planning, Scheduling and Human Resource.
A well-established and competent professional with 8 years experience gained in offshore drilling operations within the oil and gas industry.
Mechanical Engineer
8 yrs experience in oil and gas industry, looking to start career in offshore or allied industry, available immediately
Worked as Senior Engineer in the Instrumentation Department of Travancore Cochin Chemicals Ltd., Kochi from Oct 1999 till date. Got trained in the calibration, troubleshooting, and maintenance of different types of pneumatic, electrical and electronic instruments.
I'M READY TO WORK WITHOUT SUPERVISION
BSC in petroleum engineering. experienced in 2 petroleum services companies as directional drilling for 1 1/2 years , courses in directional drilling , DRILLING SOFTWARE , H2S AND BREATHING APP., LITHIUM BATTERY SAFETY. READY FOR RELOCATE IMMEDIATLY.
Petroleum Engineer with 08 years of highly diversified experience in different countries, companies & in Production, Reservoir, Facilities, Stimulation, Completions, and Drilling; major and independent responsibilties.
*2 years in R&D division of Memcor Australia (a Veolia Company); *Applied Science / International Studies degree at the University of Technology, Sydney (2003); *Languages: French (fluent), Russian (basic); *Ability to work anywhere.
Pipe fabrication, pipe fittings, layout, maintanence and servicing, assembling
maintenance millwright-28yrs. from trainee to maint. superintendent
Over twenty years experience covering all aspects of Document Control and Information Management responsible for the supervision of junior staff and the management of Document Control. I have worked in a variety of locations in the UK and overseas (Libya and Qatar)
DIVERSE POWER GENERATION and MAINTENANCE MANAGEMENT PROFESSIONAL
Diploma In Electronics & Communication.Has 11 years of experience in the field of Implementation, Operation & Maintenance of Telecom Voice & Data /Fiber Optic/Copper Networks.
Ten years experience as Production Engineer and Asset Manager for Schlumberger Integrated Project Management. Certified Project Management Professional (PMP)
good command of DCS
I am a petrophysicist working on geoframe software of slb and elan volumetric analysis .
Lead Control Systems Engineer / Project Manager having more than 16 years of experience with multinationals
Drilling Engineering skills - all facets of offshore and land well planning and execution. Specialties - underbalanced drilling and horizontal wells
Application for the post of BOILOR OPERATOR
Plant/field/well head operator
Coiled Tubing Supervisor
A+, Computer Engineer
Human Resources, Industrial Relations, General Affairs, Site Administrator, Representative, or Logistics/Material Handling.
Floorhand certification,driver lic.,whimis,H2S
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   [ 142 ]   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com