Resume - Master Degree Of Science Major In (( Synthesis of cascaded refrigeration systems...

Misco Jobs

Resume #59678

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To seek the job which will take me in a direction where my career growth and my capabilities will increase as well as rewarded appropriately.

SUMMARY OF EDUCATIONS

* M.Sc. in Chemical Engineering & Petroleum Refining FEB. 2006
Faculty of Petroleum & Mining Engineering, Suez Canal University
((Synthesis Of Cascaded Refrigeration Systems))
Which is the main part for LNG & NGL Industries this gives me high knowledge in refrigeration systems like Cascade, Complex and MR. Refrigeration systems and Cryogenic operation.

* B.Sc. in Chemical Engineering & Petroleum Refining–Aug., 1998
Project major in, (Tow phase pipe line design)

PUBLICATION:
F. Rabea, S. aly and M. awad," Fuzzy approach for cascade Refrigeration Synthesis ", HYDROCARBON PROCESSING March 2008.VOL.87 NO.3

CURRENT JOB TITLE

Section Head Process Engineer in Ras Shukur Gas Plant at Gupco
EMPLOYMENT HISTORY (Gupco petroleum company )
Dec.,1999 – July 2002 Operation Engineer
July 2002-July 2004 1st.Process Engineer
Aug., 2004-Till july 2007 Senior Process Engineer.
From july 2007Till now Sec Head Process Engineer

SUMMARY OF EXPERIENCES IN PROCESS

* Participated in the preparation of Trans Gulf Gas plant shutdown plans, many times, through shutdown meetings, outstanding items list, process isolation procedures and isolation registers for all units or vessels.
* On job training for Gupco operators and new engineers.
* Participated in the DCS Operator station upgrade from Infi90 to 800 XA for the Trans Gulf Gas Plant, FAT and SAT Tests.
* Built HYSYS simulation program to estimate the optimum operating conditions for refrigeration unit to obtain the minimum cooling temperature at the minimum power consumption and developed new approach to design cascaded refrigeration system.
* Professional in operating refrigeration units.

SUMMARY OF EXPERIENCES IN SAFETY
* One of the team auditors who followed up the preparation for
ISO 14001 certificate to Trans Gulf Gas Plant.
* One of the two auditors who take the responsibility to ensure & verify that the safety management system is implemented and meet the requirements of OHSAS 18001 certificate to Trans Gulf Gas Plant.
* Perform all risk assessment, STOP card, Safety audit and Hazop studies.
Job duties:
My job responsibilities as Operation and Process engineer were:-
- Carry out Material & Heat Balance, unit's performance check, Optimization, and process equipment Sizing using HYSYS simulation package.
- Process HAZOP Review.
- Review of in-house engineering works including drawings, Specifications, Data Sheets.
- Operate the plant in strict adherence with existing safety and environmental regulations.
- Follow and review the waste disposal from the plant to ensure save Environment.
- Follow up the design works of consultants/ contractors & sub-contractors for any new modification / package / project.
- Participate in the preparation for the different shutdowns.
- Give the guide to the operators inside the field and in control room on (DCS) distributed control system.
- Ability to operate on (DCS).
- Prepare the daily, monthly, the annual activity & production report.
- Perform job procedure, risk assessment analysis, I C C, hazop& safety audit.
- Ensure that all safety rules are respected and executed well.
- Follow the general maintenance in there work.
- Perform corrective actions to prevent equipment or system failure
- Monitor Fire & Gas System through monitoring and control system and take immediate corrective action in the event of alarm or malfunction
- Respond to and handle plant emergencies and upsets.
- Attend the operations meetings to eliminate any bottlenecks

* Senior Process Engineer

- Manage and provide on site technical support, plant trouble shooting.
- Normal operation and troubleshooting with very good knowledge of DCS Baily Infi 90 & ABB 800XA systems.
- Follow & make the necessary change for the operating conditions.
- Issue material requisition for shortage and required spare parts at Gas plant from vendors.
- Follow up with the Chemical lab. Dep. to achieve the recommended LPG, condensate & gas specification.
- Reporting the daily production report & process activities to main office.
- Execute annual, ½ annual overhauls programs of process Equipments (filters - heat Exchangers - vessels – columns – air coolers, etc….).
- Report and arrange with maintenance crew for equipment maintenance and any equipment failure
- Follow up all PM's & CM's for all the equipment in the plant.
- Have the authority to issue all types of work permits and work orders through Maximo.
- Perform the operating and capital budget.

Trans Gulf Gas Plant (GUPCO) -EGYPT

The Plant is designed to Produce 900 Ton/Day of LPG, 4000 BBL/Day of condensate and 137 MMSCFD of sales gas. the gas output from the gas plant is compressed to sales gas national grid and to gas lift system at
October complex platform.
LPG recovered from the gas plant is pumped to Assuit and Suez area.
Condensate recovered is pumped through the crude oil pipe line to
Increase its API.
.
The facilities consists of:
* Gas Compression (11 Centrifugal compressors )
* Gas Dehydration using Molecular sieves.
* Hydrocarbon Dewpointing using 2 Propane chilling unit.
* 5 LPG spherical tanks with 10000 ton storage capacity & 2 Condensate tanks total capacity of 30,000 BBL condensate

* Utilities (6 air comp's. – 4 Gas fired heaters (cylindrical type – direct
Fire) – High & low press. Fuel gas scrubbers - H.P, L.P. flare sys. (auto ignition) - Open & closed drain - 2 Gas turbines gen. "Solar- 7.2 MW" - 650
kw Emergency diesel gen.

* Fixed Fire Fighting water loop ( Fiber Glass ) of 16" diameter, The fire fighting water is fed by sea water using 4 diesel engine pumps and 2
Jockey electric water pumps

PERSOANAL DATA

Birth date & Place: 29/07/1974 Cairo, Egypt.
Nationality: Egyptian.
Gender: Male.
Marital status: Married.
Military Service: Fully exempted
LANGUAGE
- Arabic: Mother tongue.
- English: Very good command of English spoken and written.
*) I have certificate from ELS Language centers of level 105
with average grade of 86 %
*) also have TOFEL.
- French: Basic knowledge.

TRAINING COURSES

1- T321 Configuration system 800XA with Harmony Conducted in CLEVELAND,OH, USA)
2- Gas Production Facilities.
3- Natural Gas Processing.
4- Processing In The Natural Gas Industry
5- Advanced natural gas processing.
6 -Gas Dehydration
7- HAZOP & HAZARD
8- Flow measurements.
9- Heat Exchanger & Fired Heaters Design Fabrication & Testing.
10- Advanced Lead Auditor (OHSAS 18001).
11- International Environmental Auditor For Evaluation Of ISO14001 & ISO 10011.
12- (STOP) safety training observation program.
13- Protection from Fire
14-how to work inside a team work.
15-Process Design for sourer gas services.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 9855)

Go to Search Parameters...

Brief Description

DCS OPERATOR

After completing my Diploma in Mechanical engineering from India I joined Shipping as Engine Cadet on a Product Tanker. After completing one year cadet ship I went to UK in March 2000 for National Vocational Qualification course In Marine Engineering and down all advance survival courses from there.

Maintenance Engineer (rolling mills)

INSTRUMENT ENGINEER / SUPERVISOR

Free! M.Tech with 7 years of work experience in managing functional aspects of Static Equipments Design & Engineering. Expertise in planning, executing and spearheading projects involving Design Engineering and Resource Planning with a flair for adopting modern construction methodologies in compliance to

Mechanical supervisor / Technician with experience in permit coordination

Petroleum Engineer with expertise in pipeline inspection, MFL technology, corrosion diagnostics, pipeline integrity management and assessments, large-scale petroleum relational database design and interpretation, financial analysis, budget analysis, and project management.

Process / Systems / Operations

Drilling Superintendent - Senior Drilling Supervisor, International Positions Only

Electrical / Instrument Inspector

Objective: To share knowledge on Best Practices on Health, Safety and Environment (HSE) in the development and implementation of HSE Management System and promote a culture of Continuous Improvement.

I am a senior instruments engineer. I have 15 years experience in the design and specification of instrumentation for petrochemical plants. I was involved in developing P&IDs, specifications, data sheets, logic narratives, instrument indexes, systems diagrams and alarm summaries.

Bioinformatician and clinician

To obtain a challenging engineering position in an internationally active oil/service company. Education The University of Texas at Austin May 1993 Master of Science in Petroleum Engineering. Overall GPA 3.83/4.00

I have extensive experience in Production Operations in the oil and gas industry.

Experience in Exploration and Development Geology, having involved in exploration of new areas and Enhancing of Oil Recovery in the fields of Northern Potwar Deform Zone and Middle Indus Basin of Pakistan. Day to day duties include studying the current reservoir properties via interpretation of geop

Stage 3 crane operator 25 years experience oil / gas / subsea / construction

Experienced Engineer working as Test Engineer for latest released versions of DeltaV software applications. Flexible knowledge in hardware technologies like Fiedlbus and SIS.

Engineer- electrician. Electrical installation testingand setup electrician.

Oil and gas Utilities Senior Operator, start up, power plant shift enginner

diesel mechanic&fitter turner machinist with technical management skills. 28yrs exp. expat . job locatio no problem. brief off shore exp.

Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as SABIC projects (Yanbu national petrochemical company) with Technip JV Irem sPa, and other than working with Steel plant in one of the major company JINDAL group.

My name is Garry Jennings and I would like to introduce myself as a possible candidate for the fulltime Operations Technicians positions.

Sales, marketing & Applications Eng. for all ESP applications

I am an experienced Fire Protection personnel. My experience not only in hands-on fire protection activities but also in fire risk assessment, fire protection training and supervising of down line personnel, fire protection system auditing, safety at work issues auditing.

Metallurgical & Welding Engineer with experience in failure analysis, materials characterization, welding Technology, Microstructure-Property correlation, Research and Development, QA/QC, NDT, WPS, PQR Certification Project Quality Management System, Internal Quality Audit. Expert in engineering eva

I am experient with AutoCAD by new released and CAD worx to made 3D model of piping

Drilling Engineer

Calculated volumes, Maintained well, equipment and compressors, participated in well reviews, intered volumes in computer.

TECHNICAL QUALIFICATIONS:

Have worked and travelled all over the Pacific region, NZ and Australia. I have interacted and worked with a wide diversity of cultures. I am a very hard worker, I learn new skills quickly and am able to implement them accordingly. I wish to continue utilizing my skills as a Diesel Fitter,

Master Degree Of Science Major In (( Synthesis of cascaded refrigeration systems)), *PUBLICATION:F. Rabea, S. aly and M. awad," Fuzzy approach for cascade Refrigeration Synthesis ", HYDROCARBON PROCESSING March 2008.VOL.87 NO.3,** HYSYS PROCESS SIMULATOR , Word – Excel – Power pointInternet,windows*

My backgroung is in Mechanical Engineering but I have been working in Utilities Plant Operation since past 11++ years. My expertise in Steam Boiler and Steam System, Water Technology, and others related to utility plant.

Oil wells,oil process,gas dehydration,control room DCS,storage & dispatching etc

Rotating Equipment Engineer

Principal Process Engineer (B Eng - Chem), (M Eng - currently enrolled), 12 years design experience worked in RSA, USA, UK

I have graduated from the University of Khartoum and got my M.Sc. there among my carrers since then is working as a mud logger and a wellsite geological supervisor

Senior mechanical draftsman

Seeking middle level managerial assignments in the domain of Procurement / Materials Management to excel with organization of repute.

i am chemical engineer and have 11 years experience

Qualification:DIPLOMA IN MECHANICAL ENGINEERING;Iam having 18 years experience (10 years in Gulf + 8 years in India) in the field of Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.

Landmark Drilling Consultant seeking international position with 28 and 28 rotation.

Over 14 years of experience covering industries of Engineering, Oil & Gas , Chemical industry, Offshore and Space Industry in the fields of Quality Surveillance, Project site Inspection & Management, Product certification (ATEX, MD, PED, RoHs, WEEE), Type approvals, WPS/PQR & WPQR approvals, Coatin

16 yrs. plus Instrument & Control Maintenance & Engineering experience in Gas & Petrochemical Industries, Copper Smelter & Refinery, Aviation Air Defence & Telecommunication systems.

IT with expertise in systems business analysis, database management, ERP implementation & support

Business and Customer focused team player, qualified engineer and lead auditor specializing in Quality solutions for project and corporate applications

Planning Engineer

Batchelor Degree, Chemistry with 17 years of exeperince in Process Industry

Installation,Commissioning ,Maintenance of process instrumentation -oil and gas based plants/facilities[onshore/offshore]

I am enclosing a copy of my resume in hopes you will consider me for a Petrophysicist position with your company. I believe that my petroleum engineering, petrophysical interpretation, and reservoir characterization background are a good fit for the qualifications needed the petrophysicist position

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out