Resume - Experienced Mechanical Technician,well verse vibration and industrial equipment ...

Misco Jobs

Resume #59999

CONTACT INFORMATION:
View contact information...

POSITION DESIRE: ROTATING EQUIPMENT SPECIALIST
OBJECTIVE
To expand and utilize my knowledge in the field of Vibration Analyzing and Balancing in the modern world of Technology.
EXPERIENCE
18 August 1991- present Arabian Gulf Oil Company Benghazi, Libya
Senior Mechanical Technician- Rotating Equipment
Duties and Responsibilities:
„« Assigned in Sarir Oil Field and Sarir Refinery as a Mechanical Specialist whose function is to provide technical support to all rotating equipment on both areas of responsibilities. (The oil field has an average production capacity of 200,000bpd of crude oil and 10,000 BPD of gasoline - refinery output)
Scope of Work:
1. Doing overhauling and preventive maintenance job.
2. Trouble shooting and do some modification of equipment such as impeller trimming if required( impeller will be rebalanced).
3. Vibration Analyzing: Using frequency spectrum and Phase tracking analysis (using SCHENCK vibroport 25, 30 & 41).
4. On shop balancing (using SCHENCK CAB -720 ) and field balancing(Using Vibroport 30 and 41) of rigid and flexible rotors.
5. Alignment using conventional dual gauges and ultra accurate laser alignment machine (Rotalign pruftechnik):
Kinds of equipment in the area of responsibilities knows to operate and repairs:
a) Rotary, Centrifugal, and Reciprocating pumps, and Compressors.
b) Familiarity on static and mechanical seals reconditioning and repair.

12 Feb. 1990- 28 Feb. 1991 WAHA Oil Company Tripoli, Libya
Electro-Mechanical Technician (General Maintenance)
Scope of Work:
1. Assigned in Waha Oil Company Head Office Building to maintain building heating and air conditioning system and its emergency generators set for uninterrupted power supply to the building.
2. Doing daily check to all equipment under my duty of responsibility.
3. Performed trouble shooting, preventive and maintenance of all equipments in the building. Tending operation of chillers (Centrifugal Hermetic). Took hourly records of parameters, adjustment of thermo coolers for more efficient machine performance. Starting, stopping and synchronizing of units as required.
4. Make daily reports: Weekly, Monthly and Yearly Operational and Maintenance activities in the Building Plant Room.
5. Assessed materials consumed and spare parts used and to be needed for future requirements of maintenance such as Chemicals for 2 Units Desal. Plants, Fuel being consumed by Boilers, Refrigerant and Oil for Chilling Plant (3 Units), Lube Oil for Diesel Gen. Sets and other consumables needed in Plant Operation and Maintenance.
6. On the job training to 4 Locals assigned in the operation and maintenance of Plant Room in the building.
Others:
ƒæ Performed water analysis, adjustment of chemicals feed pumps, mixing of chemicals (before) to be fed in the system; Chlorine, Iron, PH and TDS of Feed H2O and Permeate Water.
ƒæ Recording of Data for Daily/ Weekly/ Monthly/ Yearly Reportings.
11 Aug. 1981-10 Oct. 1986 SCECO West Jeddah, KSA
Gas Turbine Operator
Duties and Responsibilities:
„« As an Operator, report directly to Chief Engineer of the plant. Work on shifting basis -8 hours duty.
„« Responsible for starting, synchronizing, stopping and emergency stopping of the unit as required. Hourly reading of Main Units, accessories/ auxiliaries parameters. List down faults/ troubles and all activities encountered in entire shift. Adjustment of amperes, frequency, loads, voltage and others for optimum performances of the units.
„« Properly turn over to next Operator on duty. Remarks all the activities in Log Book and Log Sheets for Operators guidance to operators.

7 May 1979-24 Apr 1981 Al Touki Co. for Industry and Trading Jeddah, KSA
Electrical/Mechanical Technician
Scope of Work:
1. Tending the operation of (4) Four Units of Taiyo (Mitsubishi) Diesel Generators Sets, with maximum capacity of 1000 KW each unit.
2. Hourly reading of system and units parameters data. Responsible for control adjustment such as Amperes, Frequency, Voltages, and Loads for efficient Machine Performance.
3. Executed remedial counter measures to units with troubles. Responsible for stopping, starting synchronizing and emergency stopping as required
4. Doing preventive maintenance/ repairs and overhauling of the unit may either be Mechanical or Electrical. Acts as a Group Leader of 5 Crew (2 electricians & 3 mechanics).
5. Made Daily, Weekly, monthly and Yearly Reports in the Plant Room activities: Consumed Manpower, spare parts, fuel consumed, oil consumed, total generated wattage, kinds of troubles, maintenance applied and total running hours of the Plant.
6. Reports were Daily Log on Operators Log Book and Sheets for Daily Reference of Operator's itself.

11 August 1973-7 May 1979 Filipinas Synthetic Fiber Corp. Laguna, Philippines
Power Plant Mechanical Technician
Duties and Responsibilities:
„« Doing mechanical daily check to all rotating equipment in the area of responsibility and do repair to minor troubles and made appropriate reporting to major problem encountered in the entire shift.
„« As a Power Plant Mechanical Technician act as a Lead Man or Team Leader. Performed preventive maintenance, trouble shooting, minor repairs, general overhauling.
„« Performed testing and execute adjustment of controls, valve, and other requirements of the units before endorsing to Operation Department for service.
„« Conduct a daily, weekly, monthly and annual maintenance report.
EDUCATION
1971-1973 Western Batangas Technological Institute
Balayan, Batangas, Philippines
Auto-Diesel Mechanic
PERSONAL PROFILE
Born on March 2, 1953, married and a father of three. Weights 170 lbs, and stands 5¡¦6¡¨height. Expert in On-shop and Field Balancing and Vibration Analyzing of Rotating Equipment. Overhauling and repair of huges Diesel Engines,Pumps and Compressor (centrifugal,rotary and reciprocating). Repair and Reconditioning of Mechanical Seals, Alignment using conventional dual dial gauges and Ultra Accurate Laser Technology. With basic understanding in electrical circuitry.Basic knowledge in AutoCAD 2D drawing. An innovative, sociable,systematic and has deep sense of responsibility.
CHARACTER REFERENCE: will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 10902)

Go to Search Parameters...

Brief Description

Petroleum Engineer with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology and application of new technology for onshore/offshore rigs and office operations in Drilling, Completions, Testing and Workover of vertical, directional, multilateral and hor

Exploration geophysicist with 26 years experience in both exploration and development prospect generation. Major strength in 2D, 3D depth imaging, seismic interpretation, integration, and team management. Excellent communication and presentation skills.

MBA marketing and Electrical Engineer

Drilling fluids engineer. 17 years experience in drilling and drilling fluids, Familiar with all mud systems, tendering, mud programs and waste management. Sales engineer. Computer literate.

Class 2 Mate unlimited IFO 10353

Lead Piping Engineer, Procurement Engineer, Engineering Coordinator, Pipe Stress Analysis

I have 12 years of experince in Instrumntation engineering. I have worked in oil and gas fields, Engineering consultancy, Power plant and etc.

Project Mechanical-Piping Engineer

An engineer technical assistant with progressive experience, working in Environment and Reclamation, Production and Operations, as well as Drilling departments.

Production supervisor

Manager (Production and Reservoir engineering, subsurface studies)

Motor Rewind Techinician

Education/ University/Year : Bachelor of Engineer in Mechanical Engineering (B.E.,) / University of Madras-1994 Professional Qualifications: ASNT Level II in UT, RT, MPT & PT Training Undergone: H2S and B.A training at, Qatar petroleum, HUET (Helicopter under water escape training) at Ventur

15 years autocad experience, off shore platform design, mechanical design, machinery design, civil drawing experience, Senior Designer, Group Lead.

Maintenance Planner/Schedule with 17+ years of work experience out of which 14+ years in Oil&Gas, Petrochemical, Refinery and Fertilizer Industry Maintenance and Maintenance Planning activities. Good working knowledge of Planning&Scheduling, Reporting, SAP-PM, Primavera 6.1 etc.

Available 2nd Engineer -UK CoC Unlimited ,Offshore DP Vessel

I am a successful, experienced and qualified Commissioning Start up Specialist Engineer, Commissioning Engineer, Production Supt-Supervisor, Shutdown Coordinator with over 18 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Instrument technician

Petroleum engineer,involve in drilling activity and post exploration - exploitation. willing to work any place in the world (no exception), ready to start working asap.

2D/3D seismic interpretation for structural and stratigraphic plays in the areas of both compressional and extensional tectonics, seismic attributes on 3D volume, AVO modelling and integration of acoustic impedance inversion.

Experienced Mechanical Technician,well verse vibration and industrial equipment balancing ,knows o/h of all types of pumps and compressors.

Electrical Engineer, Engineering.Construction and commissioning of offshore oil & gas facilities

Electrical Engineer with over 13 years diverse experience in managing medium scale of new & revamp projects. Proficient in design reviews, electrical equipment selection, installation & construction, monitoring, commissioning, testing and maintenance of electrical equipment.

Petroleum engineer with more than 8 year experience as System analyst, familliar with Oil/Gas production system (Scada, Historian) and SAP R/3

Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro

SCADA and Automation and I&C Engineer

Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.

(PRODUCTION MANAGER)

I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.

Seeking an entry position in Management Consulting. Can leverage diverse skills in Engineering, Management and Business. Interests in productivity/process improvement and culture change management.

Energy industry economist and manager with broad experience in both the private and public sectors covering exploration & production, refining & marketing, transportation, utilities, public policy and regulation.

Team Oriented Land Drilling, Production and Management Professional

I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

I have experience as a tool pusher and driller.

Free! Drilling Superintendent: 21 years’ of progressive experience in land drilling, including extensive experience in international environments, with comprehensive management background.

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

Skillful, energetic and dedicated Project Controls Planner/Cost Analyst with extensive international Oil & Gas experience. Seven plus years interfacing with engineering, procurement, manufacturing, finance and accounting plus one year marine construction; installation and vessel operations with emp

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out