Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #60048
next resume »»
CONTACT INFORMATION:
View contact information...
Skill Set
¨ Shift-in-charge of a Petrochemical Plant
¨ Operation of Digital Distributed Control Systems (DDCS) – CENTUM XL (Yokogawa)
¨ Operation of process utilities viz., Water Treatment Plant, Cooling Tower, Utility and Instrument Air & Nitrogen Production Unit, Boiler, Process Effluent & Sewage Treatment Plant, Burnt Lime – Storage and Slacking Unit, Storage Tanks.
¨ Operation of High Pressure & High temperature Mixed Flow Reactors, Heavy Duty High Pressure Compressors and Pumps
¨ Operation of Fractionation, Vacuum Distillation, Azeotropic Distillation and Acid Absorption columns with both packing and tray internals
¨ Operation of Combined Oil and Gas fired heaters with natural and balanced draft
¨ Plant Commissioning Activities – Cleaning, Gauging, Air Blowing, Hydro-testing, Pneumatic Testing, Nitrogen Purging, Chemical Cleaning, Preservation
¨ Handling of chemicals viz. Propylene, Chlorine, Benzene, Kerosene, Hydro Fluoric Acid, Hydro Chloric Acid, Chlorinated Organics, Caustic, Fuel Oil, Hydrogen, LPG
Academics
Technical Qualification: Bachelor of Technology in Chemical Engineering (2005)
Institution: SRI VENKATESWARA COLLEGE OF ENGINEERING, SRIPERUNBUDUR, CHENNAI
University: Anna University, Chennai.
Aggregate & Class: 80 % (excluding I year) – First Class with Distinction
Project: Manufacturing of Bio-Diesel from used vegetable oil using
Sodium ethoxide.
Schooling: Higher Secondary (XII) – 2001, 81.25 %
: SSLC (X) – 1999, 78.85 %
Institution: Government Model Hr. Sec. School, Pudukkottai.
Organizational Experience
Working as Executive (Production), in M/S Tamilnadu Petroproducts Limited (TPL), Chennai since June 2005 (2 years). A joint venture of Southern Petrochemical Industries Corporation (SPIC) and Tamilnadu Industrial Development Corporation (TIDCO), TPL is a leading manufacture of Linear Alkyl Benzene, Epi-Chlorohydrin, Chlorine and Caustic
Job Responsibilities
To achieve the Production Target, maintaining the Specific Consumption Ratios by:-
¨ Leading a team of Engineers and Technicians, coordinating the overall Operation and Maintenance of the Process Plant and its associated Utilities
¨ Supervise the Operation and Control of the Process and Utilities through DDCS
¨ Monitor Start-up and Shutdown activities, ensuring adherence to the procedures
¨ Trouble shoot operational problems and continuously monitor plant performance & quality though Management Information Systems (MIS) and Enterprise Resource Planning (ERP)
¨ Co-ordinate with the Service Departments, ensuring safe work procedures and timely completion of maintenance and service activities to minimize downtime
¨ Act as the Chief Emergency Coordinator, lead the crew in stopping the emergency and preventing it from escalating
¨ Assist the Head of Department in Reports generation, ISO Documentation and in Training
¨ Maintain Log of all the shift activities and represent the Head of Department in his absence
¨ Material Management and Man Power Planning for smooth functioning of the plant
Personal Contributions
¨ Member of the Plant Performance Improvement Committee
¨ Suggested to recycle raw material wasted through process vents, back to Storage area with a simple modification without plant shutdown – implemented successfully resulting in appreciable decrease in Specific Consumption
¨ Suggested to recover raw material loss through compressor packing, back to its suction -implemented successfully reducing the loss to about 20%
¨ Studied and reduced product slippage in Purification Units by modifying the operational parameters
¨ Suggested to recover the excess heat produced in the De-Oxidation Unit for Nitrogen, because of the increased Oxygen load without changing the existing Catalyst
Computer Skills
¨ Operating System: DOS, Windows
¨ Packages: MS Office, SAP R/3 (User)
Extra Curricular Activities
¨ Member – Indian Institute of Chemical Engineers (IIChE)
¨ Executive Member – Chemical Engineering Association in College
¨ Hobbies – Music, Chess, Motor Bike racing
Personal Details
Date of Birth: 22.08.1983
Nationality: Indian
Marital Status: Unmarried
Languages: Tamil – Speak, Read, Write; English – Speak, Read, Write
Availability: After three month
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 6751 to 6800 of 10903)
Go to Search Parameters...
Brief Description
multi ndt technician ASNT level II
Logging engineer
I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.
B.S. in Chemical Engineering with a good background in Chemical Process environment .
Process Engineer and B.Tech Chemical Engineer from IIT, India looking for a bright opportunity in Oil and Gas Sector
Field Engineer for Schlumberger graduated from Sultan Qaboss University with bachlore degree in Telecommunication and Signal processing
I am an HND graduate in Petroleum Engineering, got the ability to work in an environment where innovation, integrity, implementation and impact are necessary ingredients of success, ready to work with the team,with little or no supervision and perform task even under pressure.
Senior Civil Structural PDMS AutoCAD Designer
IT Specialist with emphasis on Project Management, Technical Services and International Project Coordination
Metallurgist, Welding Inspector, CSWIP Radiographic Interpreter Level 2, ASNT Ultrasonic Testing Level II
Administrative Officer cum Sales Coordinator
Working as a process engineer in reputed company, Finished the B, tech., (chemical engineering)
Hydrocarbons measurement specialist (crude oil)
A person with 5 years extensive experience in making Design Drawings and Working Drawings for both Mechanical and Civil fields using Auto CAD and Micro station.
Growth with Profit (Marketing, Operations, Sales & Business Development)
Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager
MBA, 100% Spanish and English.
Executive management, business development, supply chain, IT, embeded system
B.Sc (Hons) Accounting. Ability to learn and assimilate, Good team player with analytical mind, Ability to adapt in any given situation, Good communication and problem solving skills
PRO-ENGINEERING Designing Software,3D Solid Works Designing Software,MS office, Basics of C language.
But I have directed groups of technical people as well as managed a mexican project in monterrey.
Cswip 3.4U Underwater Inspection Engineer CV
Over (3) years practical experience in surface and underground mining environments. Experienced in short-range mine planning. Familiar with production scheduling and phase sequencing using Net Present Value (NPV) method. Proficient in relevant mine planning and geotechnical software.
Planning Engr. + primavera + MS Project + AutoCAD
Goal oriented professional with experience in corporate and agency recruiting, customer service, training & supervision. Proficient at handling multiple tasks simultaneously, problem solving & articulate with strong interpersonal skills.
Dedicated material control and procurement specialist for piping, electrical and structural materials in the energy, oil and gas industries. Proficient in timely requisitioning of inventory items with outstanding verbal and written communication skills.
Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking
1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv
Qualified for Piping Stress Analysis Static and Dynamic knowledge with CAERSAR II Stress analysis software certification by COADE, ASME B31.3 Piping Process Standard knowledge, International codes & Standards such as ASME, ASTM, API, ANSI, DIN etc, Piping Engineering knowledge,
I finished Masters in chemical and process engineering in Otto-von-Guericke University, Magdeburg, Germany and I did Bachelors in Mechanical Production and Industrial Engineering in Andhra University, India. I am skilled to learn the new things easily and perfectly.
Stress analysed all of the critical piping systems in which are under critical conditions in onshore and offshore projects including PSV''s, piping connected to rotating/static equipments/1200 kW reciprocating compressors, piping subjected to tank settlements, bridge movements and etc.
B.Sc. (chemistry) 13+ years experiencei in oil/gas &petrochemicals plantoperation. Experience to work with contract resourses(USA), UOP(USA), planttech(india)COSDEN(USA) people in enert entry in vessels for catalyst replacement jobs. DCS /PLC experience, fire trainning, first aid trainning attended
Control Systems Engineer
Confident and experienced engineering professional.Skilled communicator and determined influencer. Computer literate.
Knowledge in Autocad 14, LT2000, 2002, 2004, Pipe Designer 3D.
I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).
Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.
I am candidate who has excellent research and development skills along with good manufacturing experience.
Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.
Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.
Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.
Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.
Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.
Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service
Post Applied Document Controller
Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports
Geologist looking for employment in the Oil Industry
Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours
I am full confident about the any job of analyzer/instrumenation for detail see my resume
Good research aptitudes intellectual, potential and creativity.
First
Prev
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
[ 136 ]
137
138
139
140
141
142
143
144
145
146
147
148
149
150
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com