Resume - I have extensive experience as a process engineer in refining and oil production...

Misco Jobs

Resume #6013

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
* Eighteen years experience as a chemical engineer: three years as a research/teaching assistant, nine years in refining and six years with engineering/construction companies.
* Experienced in Cat Reforming, Hydrotreating, H2SO4 Alkylation, Sulfur Recovery, Process Design, Process Trouble Shooting, Process Controls, Crude Distillation, Gasoline and Diesel Blending and Scheduling, Process Safety Management including Process Hazards Analysis, Aromatic Extraction, Pilot Plant Operation, Gas Dehydration, and Crude Oil Production Facilities.
* Professional Engineering License - Colorado Registration No. 28824 and Alaska Registration No. 9728.

EMPLOYMENT HISTORY
Roddey Engineering Services - Shreveport, Louisiana June 2003 to Present
Senior Process Engineer – Process simulation, development of PFD's, and equipment specification sheets for cost estimating of ultra low sulfur diesel projects. Developed gasoline blending models to for various refinery configurations.

Saudi Aramco - Ras Tanura, Saudi Arabia April 2002 to June 2003
Refinery Process Engineer – Day to day operations, trouble shooting, turn around planning and catalyst selection for two semi-regenerative reformers. Mentoring young engineers and assisting in preparation of capital budgets.

Williams Energy Services - North Pole, Alaska August 1999 to April 2002
Senior Process & Project Engineer - Development of process options and preliminary estimates to support feasibility studies and capital budget planning. Developed Low Sulfur Fuel options for refinery. Carried out scope development, cost estimating, economic evaluation, AFE preparation, process design, PSM documentation, and management of refinery projects from inception through start-up.

ASRC Parsons Engineering, LLC - Anchorage, Alaska July 1997 to August 1999
Principal Process Engineer - Start-up engineer developing start-up plans, operating procedures, operator training, and start-up execution. Lead process engineer developing PFD's, P&ID's, equipment specifications, and instrument specifications for North Slope production facility.

Sinclair Oil Corporation - Sinclair, Wyoming August 1992 to July 1997
Process Engineer - Day to day operations, trouble shooting, and turn arounds of Reformer, H2SO4 Alkylation Unit, Crude Unit, Sulfur Recovery Unit, Distillate and Naphtha Hydrotreaters, and Amine Unit. Worked vacation relief for Operations Unit Foreman. Involved with engineering and construction of a distillate hydrotreater, sulfur recovery unit, and sour water stripper. Involved in gasoline and distillate blending and scheduling.

United Engineers & Constructors-Denver, Colorado October 1990 to August 1992
Process Engineer - Worked as a contract engineer for ARCO Alaska in their Alaska office trouble shooting and design work. Worked on development of PFD's, P&ID's, equipment specifications, instrument specifications, and preparation of operating manuals.

Brown & Root Braun - Houston, Texas May 1989 to October 1990
Process Engineer - Developed presentation on how 1990 CAAA would effect the refining of gasoline and diesel. Collected and analyzed data while operating a pilot plant for an aromatic alkylation process.

EDUCATION
Colorado School of Mines - Golden, Colorado January to December 1988
Completed one year towards a Ph.D. Degree in Chemical Engineering – GPA: 3.37/4.0
Oklahoma State University - Stillwater, Oklahoma December 18, 1987
Master of Science Degree in Chemical Engineering – GPA: 3.23/4.0
University of Wyoming - Laramie, Wyoming May 19, 1985
Bachelor of Science Degree in Chemical Engineering - GPA: 3.19/4.0

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 9777)

Go to Search Parameters...

Brief Description

Operation Management for FPSO / FSO

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

I am a master degree holder having 13 yrs experience presently in UAE as well testing supervisor.

I am a professional engineer with M.Sc. in Chemical Processing from University of Strathclyde, Glasgow, U.K in October 2003 and presently working on process design and process detailed engineering for ARAMCO and other clients of JACOBS-ZATE in Saudi Arabia. This is Engineering, Procurement, Project

QA/QC Welding Supervisor: SSCL. DME (3years welding), WI (QA/QC) 1992, Safety Training qualified and 21 Years Experience in working with ASME, AWS, API standard in EPC Industries upstream & onshore ,Seeking employment in your EPC industries, please find the attachment.

I have a variety if experience in administration, marketing, direct & retail selling, Operatios Management and an engineer with Executive masters in International Business & PGDBM in marketing.

I have total Twenty-Three years hand on working experience in Electrical maintenance and operation fields in various organizations.

Long experienced (25years) in marine bunkers-lubes business, with a strong ability to multitask expertly and efficiently.Mainly active in negotiating, promoting and developing the supply business, while at the same time maintaining strong values and ethics.Able to work under pressure.

CSWIP (3.1) welding inspector

i am worked in refinary at india as a process operator in distillation unit and give a so many suggation to get energy saving and cost reduction.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

As a former top-ranked, sell-side, Bay Street equity analyst, I am very familiar with the communication required between a listed company & the capital markets. I am proficient in financial statement analysis & modelling, & have proven written & oral communication skills.

Over 30 years in the Marine and oil Industry. I posess marine Qualifications and have worked my way up through the Oil and gas Industry. I am a Team leader and also a Team player.

Oil and gas treatment and injection and water treatment and iunjection.

Senior mechanical engineer

Instruments & control, electromechnics, electrical

Drilling Supervisor for 29 1/2 years with major international operator. Drill, complete, workover, and testing experience on land, jackup, inland barge, platform, self-erecting tender assist, and semi rigs. Worked last 20 years on overseas operations.

36 years in land administration, due diligence, division orders, supervisor & manager

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

A proactive and enthusiastic individual with 15 years of extensive expertise in the field of hydrographic surveying, has the ability to work both in a team and individual.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

QA/QC Engineer-International projects-Oil&gas industry

Highly motivated, energetic, hardworking, result oriented QA/QC professional, with Master of Science (Chemistry) who is well organized, flexible and determined to exceed performance standards. Offer a broad technical background with 22 years of profound petrochemical experience.

Pre-commissioning, commissioning, de-commissioning & Re-commissioning of Hydrocarbon tanks/LPG bullet/Double Wall Ethylene tanks & hydrogen bullets(150 kg/cm2) for statutory inspection ,Gas Turbine commissioning, Safety measures in Hydrocarbon storage, loading & handling system, SAP Operation

More than 15 years total experience on combined field in construction, inspection, engineering project management, commissioning and maintenance of instrumentation and control on gas and oil production facilities, geothermal, power, petrochemical and oleo chemical refinery plants. Extensive knowledg

Analyst/Technical Assistance for reservoir/production operations

I have extensive experience as a process engineer in refining and oil production that I would like to put to use in a technical service or economics and planning management position.

Chief Engineer/ Barge Mechanic with work experience more than twenty years incl. 8 years of Offshore (Juck-up's - 5 years). Education: Maritime Academy (five years course). CEng, MIMarEST.

Natural gas/ oil system Simulation and Optimization

B. Sc. ,Industrial safety diploma & environment diploma

Experience in inspection of Reformers, Heaters, Vessels ,columns, Heat Exchangers and piping

Electrical Engineer

Millwright/Industial Mechanic and Power Engineer 3rd class.

Procurement / Administrative

25 years in oil and gas production,constuction,commissioning and start up, very good written and spoken English

25 yr + hand seeking night tour wellsite supervisor slot either land/offshore, shallow/deepwater, underbalaced/hightemp, international/domestic

EDUCATIONL BACKGROUND: Diploma in Electrical Technology.

Science graduate with extensive Supervisory experience in Ammonia and Petrochemical (Ethylene/Sulfur and Formaldehyde) Plant operations/training. With having over 23 years in operations, comfortable working as Supervisor/ Training coach/Co-ordinator/DCS operation, ready to join immediately.

Registered master electrician

HVAC BOILER TECHNICIAN

I have experience of more than 22 years in the field of Power plants (CCGT/COGEN), MSF Desalination plant operations in the middle east (Saudi Arabia, U.A.E. and State of Qatar) and Chemical process industries (Bhabha Atomic Research Centre, Department of Atomic Energy, in India),. Presently working

Drilling Supervisor, Workover Supervision, Concentric Consultanting

Subsea Engineer FPSO Girassol, Subsea Technical Support related to FPSO production (280 Kbpd)

Lead Assessor

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently

All STCW certificates are valid and available

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Over twenty-five years management, technical, and business experience in a multi-national Oil and Gas environment. Several years experience in Indonesia as both Client and Contractor, with extensive experience in LNG. Strong technical background with broad business skills to match.

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out