Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #60143 next resume »»
CONTACT INFORMATION:
View contact information...

Educational Qualifications

Course University Year of Passing % of Marks & Class obtained
B. Tech - Instrument Technology M.I.T. Madras 1982 64% - 1st class
B.Sc. - Applied Science P.S.G. College of Technology Madras University 1979 70% - 1st class
P.U.C. P.S.G. Arts College
Madras University 1976 80% - 1st class
S.S.L.C. Board 1975 77% - 1st class

Experience

Total Experience: 24 Years

From 21.04.2000 till date
Employer
International Power -UK
and
Ministry of Electricity and Water
State of Bahrain

Title: Instrument Engineer

Nature of Experience: Involved in the installation, testing & commissioning and maintenance of Co - Generation plant 2 x 140 MW ALSTOM make Gas Turbine Type 13E2, 2 HRSG Boilers, Combustion Engineering Supplied Aux boiler and 4 nos. of desalination plant of 30 MGPD capacity (each 7.5 MGPD capacity multi stage flash evaporators). Involved in the commissioning and maintenance of DCS system supplied by ABB, type Advant OCS system. Familiar with configuration, System Engineering, programming & trouble Shooting with Advant OCS DCS and Allen Bradly supplied PLC's of type SLC-05 series and HIMA PLC. Experienced with EGATROL systems for the Gas Turbine of ABB with HART Protocol and Field Bus Communication systems. Involved with Alstom commissioning team for system testing, site commissioning modification works and plant betterment and Updating.

Involved in the design, engineering, testing & commissioning of Phase II Combined Cycle Power Plant of 640 MW supplied by M/s. Alstom consisting of Gas Turbines type 13E2 and Steam Turbine. Experienced in commissioning and maintenance of ¡* Turbotrol¡¨ systems for Steam Turbines and ¡* Egatrol¡¨ systems for Gas Turbines.

Familiar with Project Planning with package with MS PROJECTS and CMMS package ¡* MAXIMO¡¨ supplied by MRO Software. Involved in the selection & implementation of CMMS package, (Computerised Maintenance Management System) LAN network for the power plant.

Hands on experience on AutoCAD 2000 systems.

From 12.06.1996 till 20.04.2000
ľ Employer
M/s SPIC Electric Power Corporation Pvt. Ltd
Chennai, India

Title: Member (Instrumentation)

Nature of Experience: Incharge of Project Engineering for specification preparation, detailed engineering and Procurement of EPC Contract, negotiation with bidders for the 525 MW Thermal Power Plant at Tuticorin in Tamilnadu. Involved in the selection of ABB as EPC contractor for the project. Involved in the tender proposals, selection of DCS ABB make Advant OCS system, various PLC's of Allent Bradley for the project and Triconex PLC's for the BMS.
Having experience in working ¡* Mark IV¡¨ systems for GE turbines.
Responsible for Basic & Detailed Engineering of I & C systems including DCS, Field Instruments and I/O list, Control Valves and Sizing, logic diagrams, cable schedules, interconnection diagrams, installation drawings and engineering. Familiar with ¡* INTOOLS¡¨ package for instruments design.
Involved in the finalization of power purchase agreement (PPA), environmental clearances and O & M Agreement with Power Gen. (UK).

From 29.07.1994 till 11.06.1996
ľ Employer
M/s Southern Petrochemical Corporation Ltd. (SPIC)
India

Title: Manager & Head of Department - Instrumentation

Nature of Experience: Responsible for selection, detailed engineering and Procurement for the petrochemical plant in SPIC. In charge of the erection, commissioning and maintenance of instrumentation packages. Responsible for the preparation of specification, engineering, erection, commissioning, configuring and maintenance of honeywell TDC 3000 DCS. Having excellent skills in Honeywell TPS system in configuration, GUS graphic building, CL programs, sequences & logics, PHD system and App-node with experience in OPC communications. Through in System Engineering & programming and experienced with PLC's supplied by Siemens, Allen Bradley, West falia & Westinghouse and Various analytical instruments, Control Valves, Hazardous area classification and smart field transmitters.
Having experience in undertaking annual turn around maintenance and Erection & Commissioning.
.
From 13.12.1993 till 28.07.1994
ľ Employer
M/s Grasim Industries
Karnataka, India

Title: Senior Manager - Head of Instrumentation

Nature of Experience: Grasim Indistries is manufacturing pulp and viscose fibers. Responsible for modernization of the pulp plant with YOKOGAWA Centum XL DCS system, Allen Bradley PLC¡¦s, smart transmitters and analyzers.

From 01.01.1993 till 10.12.1993
ľ Employer
M/s NTPC - Talcher Super Thermal Power Project
Orissa, India

Title: Deputy Superintendent - Instrumentation

Nature of Experience: Responsible for erection and commissioning of instrumentation packages for 2 x 500 MW steam turbo generators. Commissioned Bailey INFI 90 DCS system for burner management system, PROCONTROL P14 DCS system for turbine controls such as Automatic Turbine Run up System (ATRS), Electro Hydraulic system (EHC), Turbo Supervisory Instruments (TSI) and HP/LP by-pass system. Analog control system supplied by HITACHI & DDC MIS system for the whole plant successfully commissioned.

From 07.09.1983 till 31.12.1992
ľ Employer
M/s NTPC - Ramagundam Super Thermal Power Project
Andra Pradesh, India

Title: Engineer & Sr. Engineer

Nature of Experience: Worked in erection, commissioning, maintenance and planning department for 3 x 200 MW + 3 x 500 steam turbo generators. Worked in BMS system of Sie Forney Italy, Mark IV Turbine Protection Systems for 200 MW boilers supplied by Ansaldo Italy (Elsag) and Siemens Teleperm Series Analog control systems for 200 MW and 500 MW boilers. Commissioned 500 MW Turbine protection system supplied by KWU (Siemens). Involved in the maintenance of various analyzers, motor operated valves and UPS systems. Also responsible for planning, dept. setup, overhaul, short term and long term planning.

From 07.09.1982 till 06.09.1983
ľ Employer
M/s NTPC Corporate Centre
New Delhi, India

Title: Executive Trainee

Languages Known

Language Speak Write Understanding
English * * *
Hindi * *
Tamil * * *
Tamil Mother tongue

View contact information...
«« previous resume next resume »»
Search Results (Resumes 501 to 550 of 10813)Go to Search Parameters...
Brief Description
A total of sixteen (16) years of working experience (thirteen years were in the oil/gas and petrochemical construction projects in the Gulf Region. A computer literate and proficient in oral and written English skills. Experienced in civil, building , steel structures, fire proofing and piping works
Oil and Gas Operations Mnagement
20 years experience in drilling operations
Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.
Reservoir Engineer specialized in Simulation
I have 33 plus years of maritime engineering experience. Over 18 years of this is offshore/oilfield/maritime experience as Chief Engineer, Maintenance Engineer. I have an ability to work safely and efficiently, without direct supervision, I use initiative to solve difficult problems and work well as
Thorough Knowledge of operation of Laboratory sophisticated instruments like XRF,GC,HPLC,UV Spectrophotometer, FTIR, MFR Tester, K.F titrator, Hunter Lab Colorimeter, Cast Film Extruder, Blown Film Extruder, Density Gradient Column, D.S.C, Capillary Rheometer etc.
M.E in Instrumentation Engineering with 17 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .
A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.
Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.
Posses degree in Geology. Familiar with Microsoft Work, Excel, Power Point, Project , Landmark Geosciences Workstation(Good), Petrel (Good), Well Kill Sheet Program(Good), Drill bit hydraulic software(very good), Mud logging software setup(good) and trouble shooting.
Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries. I have rich experience in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction
Mud engineer with 24 years of experience, on land and off shore, made all types of mud, OBM, SBM and WBM
Twenty-Seven years work experience primarily in Mechanical, Process Piping Design, Civil/GIS, CADD (Computer Aided Design Drafting) and CADD Management. Broad based as well as extensive expertise in Engineering Applications and Software Systems.
I am graduated from Algerian Petroleum Institute as an Enginer in petroleum geology (5 years graduation). I was involved in geological interpretation for prospect generation from 1995 to 2000, since then I have been focusing in geochemistry and basin modelling (1D, 2D and 3D) regional studies.
PROJECT MANAGEMENT
Quality, Health, Safety and Environment Manager - Offshore and Onshore
Free! Background and extensive experience in HES regulatory requirements through all stages of execution in major capital projects including Concept Design, FEED, Detailed Design, Construction / Fabrication and Hookup and Commissioning. Have 28 years of experience in the oil and gas industry which also i
Supply Chain and Procurement Management
Well Test Engineer
Experienced Professional Mechanical Engineer with 17 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.
Instrument engineer supervisor material control supervisor
Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission
Visual Foxpro RDBMS Programmer LAN Environment / Technician / CAD 3D Designer
I am a Civil Engineer, Internal Auditor & shortly being certified as Lead Auditor by IRCA.
Results-driven manager in diverse supply chain, purchasing and sourcing areas.
Well Integrity Specialist, Completion Production Engineer
I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis
Oil Industry exp: 28 YRS, CITGO/Consulting Downstream/Upstream/Latin America/Pricing. Objective: Pricing Manager, Business Development Manager, Head Economics Dept., Refining(Tech/Fin), E&P(Fin)Invest. Bank.
1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu.
EEHA and Hazardous Area Expert - Seeking FIFO - Remote Area Work
Administrative and Technical support Telecom, Electrical, Electronics and Instrumentation professional with 19 years of experience in India & Abroad, fast-paced environments demanding strong organizational, technical and interpersonal skills
Engineering Graduate with 19 years of experience in Sales & Marketing, Business Development, Operations, Supply and Distribution / Logistics, P&L Management of businesses involving Lubricants / Petroleum / Coatings offering Value added Solutions in Industrial, Power, Marine Segments
15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems
I am a highly skilled Mechanical Engineer with over 18 years of experience in engineering (oilfield equipment, rotating equipment, wind energy) and general technology with PhD in Mechanical Engineering.
I senior completion and workover engineer 19 yeas experience
To further enhance career growth and inter-personal skills, To share technical knowledge with other colleagues, To take the challenge of having a wider responsibilities within a new organization.
An Oil & Gas Professional with 30+ years experience in all facets of Drilling and Completion
ISO 9000:2000 QMS-03 Lead Auditor IRCA Course No.17047 and Internal Quality Auditor (IRCA No. R141), Senior QA/QC Engineer, Certified Welding Inspector (CSWIP3.1), SNT-TC1A Level 2 for RT film interpretation / UT / PT and MPI, Piping, Blasting/Painting, Structural & Pressure Vessel Inspector. Expert
Rigging & Lifting Supervisor, Health & Safety Advisor, looking for work in the construction industry, freelance contractor
I am a Petroleum Engineering Technologist with 29 yrs E&P experience, the last 12 yrs have been with major Operating Companies in positions of; Lead UBD Engineer, UBD Project Manager, UBD Advisor and Drilling Supervisor. Available for a new project 30 Novembewr 2009.
20+ years piping field - 13+ years PDS
22 years oilfield experience. High pressure, horizontal pumpdown experience. Experience with both Open Hole and Cased Hole Logging and Perforating. 2.5 years overseas.
ISO 9000, ISO 14001, OHSAS 18001, ISO/TS 16949, TQM, SAP R3, FOURTH SHIFT, SPC
over 35 years expierence in piping design; AutoCad, VersaCad, Intergraph 3D piping
Integrity management engineer with world leading expertise
Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager
This is to express my sincere interest to apply to your company as Mechanical/Piping Field Engineer/Supervisor
I strongly beleve that I am a match for the position of Drilling Completion Engineer with any Oil/Gas organization , and that the beneficial will be mutual.
Experience Environmental engineer in the oil and gas and fertilizer industries in the field of environmental monitoring, auditing, implementation of Environmental Management System ISO 14001, Waste Management
First   1   2   3   4   5   6   7   8   9   10   [ 11 ]   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com