Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #60296 next resume »»
CONTACT INFORMATION:
View contact information...

Personal Details:

* Gender: Male.
* Date of Birth: 1969.
* Nationality: Syrian.
* Family: Married to a Syrian nationality (Bachelor degree) with 1 child (3 years old).

Education:

* B.Sc Physics, 1999 University of Damascus.

Summary of Qualifications & Performance:

* Operational experience in Open Hole Logging measurements in both Clastic and Carbonate reservoirs, on both wells drilled using water based mud system and synthetic oil based mud: Logging Programs, Data Analysis and maintenance, Quick Look Interpretation and final Formation Evaluation, integrating and presenting results.
* Follow up MWD data for Well A: integrate results with the team for geosteering and making decision.
* Acquire WL formation pressures, analyze results, and integrate it with the team to give advice to managers for production/injection and perforation strategy.
* Familiar with CMR and T2 analysis: Logging program and interpretation.
* Familiar with image log interpretation and integration with geologist (UBI/OBMI).
* Evaluate Cased Hole logs for reservoir surveillance and Hydrocarbon tracking, or to assess inflow (and injection) performance, (performed numerous TDT log interpretations and Production log data analysis in different reservoirs and well completion environments).
* Successfully completed a field study for the field ABC (14 producer and 4 injector wells) within an integrated field study team. As a result of the study, there were recommendations to drill 5 new wells in the field, one well to be abandoned, perforations and water shut off's to enhance oil production and reduce water cut and TDT/PLT jobs to be performed for more information.
* Establishing parameters for Open Hole and TDT log interpretation.
* Experience in the use of rock typing and its integration into petrophysical interpretation.
* Edited density and sonic logs in ABC wells for seismic purposes (e.g. inversion).
* Exposure to Petroleum Engineering activities from field development planning to well planning and operations.
* Part of different multicultural and multidisciplinary integrated operations and field study teams.
* One of 4 Petrophysicists who independently participate in petrophysical duty scheme.
* Familiar with all facets of open and cased hole logging using Schlumberger tools.
* Teaching basic Petrophysics and physical principles of logging tools to junior petrophysicists.
* Supervising petrophysical data management (QC received data, rush print and digital, and keep eye on archiving data).

Professional Experience:

2006-Present Petrophysics Section Leader
AFPC / Petrophysics department

* Responsible of managing, integrating, presenting and reporting all Open and Cased Hole Petrophysical activities for 14 fields with over 400 wells with different types of reservoirs and depositional environments, and give advices for decision making.
* Supervising and coaching a junior Petrophysicist.

2005-2006 Field Study Petrophysicist.
AFPC / Technical Study Center

Performed Petrophysical Studies integrated with a field study team:

* Data quality check and Depth matching.
* Established petrophysical parameters for Open Hole formation evaluation.
* Concluding fluid density by correlating core to WL data.
* Porosity-Permeability relationship and X-plot facies analysis.
* RFT analysis to determine field FWL.
* Saturation Height Function.
* Editing logs for seismic inversion.
* Production Log analysis.
* Established parameters for TDT interpretation.
* Petrophysical Uncertainties.

"For more details, please look at the attachment below".

2001-2005 Operations Petrophysicist
AFPC / Petrophysics department

* ntegrated Petrophysicist in a high activity environment. (35 new successful wells and 80 TDT/PLTs per year).
* Petrophysical Responsibility for six fields with 120 wells, where open and cased hole logs are evaluated day-to-day including Triple Combo, PEx, RFT's, TDT's, and PLT's.
* Member of six multidisciplinary teams charged with proposing wells and making recommendations for development.
* Planning and logging programs for WL and MWD jobs of new wells.
* Active participation in well reviews and yearly field development planning cycle.
* Established Petrophysical Evaluation Parameters.
* Provided reservoir properties as input data for reservoir monitoring.
* Keep the petrophysical logs database up-to-date.

Language Proficiency:

* English: Very Good
* Arabic: Native Speaker

IT Experience:

* Fully conversant with SHELL software LOGIC in UNIX environment.
* Skilled user of UNIX Operating System.
* Fully conversant with PC software (Win 2000, MS Office, Xvision).
* Able to quickly learn new software.
Training:

2007 Carbonate Reservoirs 1 week ResModTec UAE
2006 NMR Logging Workshop 1 week SPWLA China
2006 Applied Structure Geology 1 week ResModTec Syria
2006 Carbonate Petrophysics 1 week Petroskills-OGCI UAE
2005 Sandstone Reservoirs 1 week NEXT-SLB Syria
2005 Production Geology for Other Disciplines 1 week Petroskills-OGCI UK
2004 Petrophysics-P262 2 weeks Shell Holland
2003 Applied Well Log Interpretation 2 weeks Tri-Star Egypt
2003 Wire Line Logging 1 week SLB Egypt
2002 Routine and SCAL Core Analysis 2 week Tri-Star Syria
2001 Basic Logging and Petrophysics 3 days Shell & SLB Syria
2001 Basic Petroleum Engineering 11 weeks Tri-Star Syria

References:

* Robert Pimentel, Head of Petrophysics, AFPC, TSC, Damascus, Syria.
Email: r.pimentel@afpc.net.sy, tel (off): +963 11 618 0459, mob +963 933 619 639.

* Frans Hermsen, Senior Operations Petrophysicist, South Rub Al-Khali Company Limited, KSA. Email: frans.hermsen@srak.com.sa, tel: +966 3895 8851, mob: +966 50 369 5640.

Attachment:
, Summary of the performed field study,

1.Field Study Justification:

There are 2 main reservoirs in the ABC Field, Current Recovery Factors for the Reservoirs B and A are 30% and 10%, respectively, which are lower than those of surrounding fields. A number of uncertainties have been identified associated with such low recovery factors:

* Reservoir A continuity and connectivity.
* Reservoir A and B interaction.
* Sweep efficiency by water-flooding.
* Poor productivity in Reservoir A.

The proposed study aims to provide reasons to the above questions and advise on an optimal sub-surface development plan for the field.

2.Objectives of the study:

Phase 1:

* Examine the potential for further development from the Reservoir A.
* Understand the Reservoir B behaviour in particularly the efficiency of the water-flood mechanism, and develop an optimization plan.
* Provide a technical feasibility study to justify drilling the currently planned well in the Reservoir A.
* Provide opportunities for the optimum development plan for 2007.

Phase 2:

* Carry out a seismic inversion study to assist in defining the reservoir property distribution
* Generate a 3D static model incorporating the inversion results
* Update the hydrocarbon in–place volume distribution
* Generate dynamic models for the purpose of reservoir production optimisation of the reservoir B and sub-surface development planning of the reservoir A.
* Create a ranked and risked portfolio of sub-surface development opportunities.
* Generate a reservoir management and surveillance plan for the field.

3.Work Plan:

A phased, toll-gated approach is to be undertaken for the integrated study, including the following steps:

Phase 1:

1.Review previous studies / work
2.Integrated well and reservoir behaviour review
3.New structural seismic interpretation and coarse 3D static model
4.Productivity analysis – Reservoir A
5.Complete discipline data integration

Phase 2: Detailed Static and Dynamic modeling.

4.Petrophysicist Tasks:

Phase 1:

* Create sums and averages per well and per reservoir unit.
* Review Petrophysical (PP) evaluation parameters for both open and cased hole, based on CCA and SCAL Core data.
* Establish net reservoir criteria for static and dynamic models [jointly with Geologist(GG), Reservoir Engineer(RE) and Production Technologist(PT)].
* Evaluate wells and determine net reservoir, porosity and saturation.
* Evaluate wells and determine cased hole evaluation (TDT/PLTs).
* Interpret RFT data and log data and establish FWL/OOWC; estimate COWC from TDT
* Create porosity-permeability relationships.
* Establish saturation-height functions (together with RE), based on both log and cap curve data.
* Define main petrophysical uncertainties.
* Integration with other disciplines.

Phase 2:

* Generation of multiple-realization models for porosity, net-to-gross and permeability.
* In-place volumetric estimates based on well data realizations.

4.Work performed by the Petrophysicist:

1.Checked and reviewed the reports of previous studies and reviews.

2.Checked the availability of the data: Open and Cased Hole logs, RFTs, Cores taken and core reports.

3.Checked the quality of the OH logs and performed depth shifting or editing where required.

4.Provided the GG with the edited and shifted Rho-data for correlation and formation tops.

5.Determined parameters for OH formation evaluation:

i.Porosity parameters: we mostly calculate porosity from density:

* Defining Rhoma: Made histograms of the measured grain density from the CCA reports and took the average as Rhomatrix parameter.

* Defining Rhofl: Made X-plot of in-situ core porosity vs. log density, using the Rhoma value @ Phi=0 to make a regression line, my Rhofl will be the reading of density @ Phi=1, this was done 4 times to cover the 4 cases of OBM over oil/water bearing zone, and WBM over oil/water bearing zone.

ii.Archie parameters: (m, n and Rw)

* Defining m: in order to take the average of m reading in the SCAL reports, I X-plotted all the measurements of m vs. FRF and concluded the slope of the regression.

* Defining n: The technique of porous plate was used to measure n which is not recommended. It gave unreliable measurements, so the standard n=2 was used.

* Defining Rw: Picket plot technique was used to determine Rw. The result was confirmed by using Schlumberger chart after acquiring results of a salinity analysis sample.

6.Acquired formation tops from the GG and loaded them into the software for OH evaluation.

7.Analyzed RFT pressure data and determined gradients in each zone of each well.

8.Run the OH evaluation, and shared results with the team, and provided the GG with the evaluation output as summary tables (including net thickness of the reservoir, gross, n/g, porosity, and saturation): per well, per units and subunits.

9.integrated RFT pressure and logs analysis with the reservoir engineer(RE) and GG to determine FWL of the field.

10.Porosity Permeability relationship (integrated with the GG):

* There are 2 main reservoir in the field: one of them was clearly divided into 2 separated facies on the X-plot with 2 classes of porosity supported by the core description with few scattering points.
* The other one was more complicated, the facies based on the core description were mixed, plotted the data by well, and by integrating with the GG it was noticed that the wells in the north-east of the field (where n/g is higher) are better quality than in the north-west (this formation was eroded in the south). As a result, was agreed to divide it into 3 facies.

11.Built from logs a saturation height function model and provided the concluded formula and transition zone to the reservoir modelers.

12.TDT/PLT analysis:

* Determined parameters for tdt interpretation: Ósh, Ów, Óhc, Óma.
* Discussed the injection and flushing scenario with the RE before running the tdt evaluation
* Analyzed the production log and compare it with the results from the tdt.
* QA/QC the results together with the RE.

13.Defined petrophysical uncertainties for the PP outputs: Porosity, N/G and HC Saturation and shared them with the team.

14.Edited density and sonic log (by integration with the Seismologist) in support of the seismic inversion study.

15.An extra task for PP was to evaluate porosity in the carbonate reservoir C (a formation with mixture lithology deposited directly above the reservoir B), and generate porosity-permeability relationship and provide results to the reservoir modelers:

* Performed lithology analysis using density-neutron and sonic-neutron SLB charts.
* Performed porosity evaluation regarding the washouts and lithology in each well (limestone, dolomite or sandy limestone).
* Used the standard parameters(m=2, n=2) for formation evaluation due to the absence of core measurements.
* Used the core measurements of few meters in one of the wells to generate Phi-K relationship.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 5351 to 5400 of 10820)Go to Search Parameters...
Brief Description
Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.
"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”
8 yrs.exp in the commissioning and operation of gasturbines, boilers & all other utilities in a big power plant and fertlisers company
Automotive and Locomotive Mechanic - Knowledgable and Reliable
HR Generalist with 14 years of experience
14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.
-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /
Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill
Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.
HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field
I had a diploma of INTERNATIONAL WELDING ENGINEER in central metallurgical researches and development institute under certification of IIW (international institute of welding). Certificate no IWE AT 0708.. I worked in EMEC as a Drilling fluid Engineer in syria from 3/2009 till now.
BE Mechanical, Good surveying and project management skills, Sales and Marketing
My unique mix of previous work experience combined with my completion of the Associate of Applied Science Degree in Process Technology makes me an ideal candidate for employment with your company.
I'm 31 years old working as a condition monitoring engineer in Badr Petroleum Company joint venture with SHELL company where my nature of job is to manage and develope predective maintenance programme for rotating machinery through vibration analysis, lube oil analysis and thermography
I am a petroleum engineer from UT-Austin. I want to go offshore for my first full time job. I enjoy being in the field over the office. I will be up to any task that is required.
Key responsibility of Marketing and selling our Products like ATC, Auto Loader, Chillers & Coolers, Hypoid Motors, Telescopic Covers, Rotary Tables, Spindles for south India Region.
Working at SUI FIELD GAS COMPRESSOR STATION (SFGCS), having daily throughput of 600 MMSCFD
Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as Qatar Gas, other than working with petro power plant, oil/gas industry & Heavy metal industry
To work in a challenging and stimulating environment envisaging personal growth and career development by associating with an organization, which provides an ambience for learning and growth, where my problem solving talents and designing skills can be utilized.
Panel operator with over 10 years experience in gas receiving facilities, looking for overseas experience
Senior Drilling Engineer & Supervisor
Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.
WELDING INSPECTOR CERTIFIED WITH B.E MECHANICAL
Bachelor of science degree holder with skills in mineral exploration
2 yrs exp in piping engg and pdms ,mechanical engineer
.Bacholar Degree In Chemical Engineering. Two Year Experience As Drilling Fluid Engineer.
Mechanical, Fitter, Basic Welder and Electrical
8 years comprehensive experience as a Senior Condition Monitoring Technician in Oil & Gas / Petrochemical / Fertilizer Industries in Middle East, like RasGas LNG Company Limited Qatar, Kuwait Oil Company (K.O.C), Kuwait, Fertilizers and Chemicals Travancore LTD (FACT) Cochin, Petrochemicals etc.
Ship Design Engineer - Piping & Machinery
Independent Professional Landman with 8 years of experience in running title, lease acquistion, due diligence, curative, surface damages, ROW and easements , permits and environmental issues with Federal and State regulatory agencies, including Phase 1,2 and 3 ESA and remediation.
Eight years of experience in Oil and Gas industry and Stimulation positions with experience in drilling, tools, and cementing. Strengths include knowledge with all Frac fluid systems, frac equipment, stimulation techniques, coordinating, and teamwork.
Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.
Project Manager
Experienced sandblaster/painter/foreman/safety tech
Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)
Control room operator-process operator-gas-lift operator-gas dehydration-..
Total Experience 14 Years – [Gulf 10 Years & India 4 Years]
November 1998 - Present at Reliance Industries Limited [Refinery Complex]
I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa
Fire Marshall or fire Captain
Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.
Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.
I believed to be a dynamic responsible and autonomous person. I am very polyvalent. I present a high degree of adaptation to accomplish new tasks. I worked on team my entire research and teaching career. I communicate easily with different culture using different languages.
I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.
Reservoir development, geologic modeling Landmark
I am currently employed as Marine Technical Manager for ASCO Plc in Aberdeen.
14 years with Texaco. ChevronTexaco. Sales & marketing professional. concentrating on downstream, fuels, retail lubricants. Educated to MBA
More than 11 years business consultancy, project management, professional engineering and supervisory experience primarily within the oil and gas industry
Experienced about fourteen years in Refineries,Gas,Petrochemical and industrial units including teaching.
UNIX / LINUX / AIX Systems Administrator
First   Prev   101   102   103   104   105   106   107   [ 108 ]   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com