Resume - Project Management

Misco Jobs

Resume #60835

CONTACT INFORMATION:
View contact information...

I am writing to express my interest in employment as Senior Project Engineer. I am enclosing a complete resume outlining my professional qualifications for your review and consideration.

You may be interested in the experience I had in the Project Management of Jackets, Top side modules of Offshore platform / FPSO, chemical, pharmaceutical and steel plants. I have worked with multinational clients like SHELL, TOTAL Indonesia, PTT Thailand, ExxonMobil, SAIPEM, Schering Plough, DuPont etc.

I believe that with my skills and experience I can contribute significantly to your organisation.

I trust you will give my application a favorable review and would be pleased to discuss the opportunity further.

(1) PERSONAL
Date of Birth: 9th June, 1961
N.R.I.C. No: S2662825C
Nationality: Singaporean
Driving License: Class 3.

(2) EDUCATIONAL QUALIFICATION
A First Class honors in Mechanical Engineering from Birla Institute of Technology, India in 1985.

- Other Certificate / Courses:

- Training in Hazard Identification and risk assessment by PT. Mitra Energy Development.
- Certified as Fire Safety Manager (Industrial) by Ngee Ann Polytechnic, Singapore and SCDF.
- Certificate in Microsoft access.
- Specialized training in cooling, cleaning and recovery of Converter Gas at Solmer Steel, France.
- IT SKILLS

a) Proficient in using common office software (MS Word, Excel, MS Access and Power point)
b) Experience in using Primavera, MS Project, EDMS (iDOCs), NAVIS WORKS, PDMS and AutoCAD. Familiar with SIMFLEX stress analysis of pipelines.
c) Use of SAP system for cost control, materials management (P.O/ P.I.).

(3) AREA OF EXPERTISE

3.1 Engineering & Procurement

* Selection, engineering and procurement of structural steel / piping as per AWS D 1.1/ B31.3.
* Selection, engineering and procurement of Centrifugal pump as per API 610 and Reciprocating pump as per API 645 codes.
* Selection, engineering, procurement, construction and maintenance of storage tanks as per API 620, API 650 and API 653.
* Interactions with Process discipline in preliminary selection of equipment type, process control systems.
* Preparation of data sheets for the mechanical equipment / packages and their cost estimate.
* Co-ordination with other departments for layout, battery limit Interface including HAZOP.

3.2 Pre Bid / Proposal Engineering

* Preparation of MTOs, requisitions for budgetary quotations, Cost and man-hour Estimation.
* Prepare Tender document, Technical bid evaluation, LOI / LOA.
* Review of vendor drawings and documents - Statement of compliance & exceptions, Technical Specification, Data Sheets etc.
* Techno-commercial negotiation and award.

3.3 Construction

* Preparation of milestone certificates, monthly progress claim, change order / notices.
* Responsible for fabrication, installation and hydrotesting activities of offshore oil and gas pipeworks.
* Planning and monitoring of spool fabrication and preparation of hydrotest packages.
* Ensuring that the projects are executed in accordance with Engineering Standards / Specifications, design guides and in compliance with QA / QC requirements.
* Preparation of schedules, monthly progress report and cost control. Also co-ordinated for permitting with authorities and statutory boards like JTC, FSB leading to TOP and CSC.
* Construction / Erection: Field work based on approved construction drawing and effect ducting / piping field changes to resolve site problems. It included regular co-ordination meeting with sub-contractors to track down progress / delays and liaise with client representative regarding progress and possible problems. Marked up 'As-Builts' were also prepared.
* Technical support during erection, commissioning and testing.
* Ensuring that the Deliverables at project completion are as per the check list.

(4) EMPLOYMENT SUMMARY & EXPERIENCE DETAILS

(a) ABB – Toyo Engineering JV, Singapore (November, 2006 to date) as Senior Engineer

SHELL's Ethylene Cracker Project in Singapore
Project value: US$ 2 Billion.

Sub-contracts and Cost control
* Deputed to Lummus Global Netherlands for preparation of Inquiry to bidders, commercial and technical bid evaluation, Letters of Awards and contracts based on lump sum / unit rate re-measurement
* Preparation of cost control report and monitoring the budget as per WBS.

(b) Nippon Steel Offshore, Indonesia ( January, 2006 to Nov, 2006 ) as Senior Project Engineer

TOTALIndonesia's SISI - NUBI Offshore platform
Project value: US$ 180 million consisting of three jackets and topside Decks of total 20,000 tons.

Procurement:
* Prepare MTOs, invite quotation from Vendors, conduct technical evaluation, submit Vendor Bid Evaluation to client for procurement of structural steel, piping and vendor packages.
* Detailed technical discussion with client and major sub-contractors / suppliers and commercial negotiation to obtain competitive price, bid evaluation and equalization.
* Preparation and issue of sub-contracting document as per contractual terms and conditions.
* Sub-contract negotiation and award of contract utilizing knowledge of market conditions and experience in estimating.
Project management:
* Updating the project schedule, issuing two week look ahead schedule using Primavera
* Liaise with client on the technical, costing and planning issues.
* Follow up with consultant for issue of drawings as per the fabrication schedule.
* Monitoring site progress by allocating weighted progress as per the terms of Contract.
* Attend weekly progress meeting with client / sub-contractors and follow up on action items.
* Prepare Technical Queries for client approval.

(c) SembCorp Marine and Offshore Engineering (April, 2004 to January, 2006 ) as Senior Engineer

(ii) PTT's Third transmission pipeline project – Offshore platform system. Project value: US$ 140 million

Sub-contract management:
* Prepare RFQ for major subcontractors and suppliers.
* Detailed technical discussion with major sub-contractors / suppliers and commercial negotiation to obtain competitive price, bid evaluation and equalization.
* Sub-contract negotiation and award of contract utilizing knowledge of market conditions and experience in estimating.
* Preparation and issue of sub-contracting document as per contractual terms and conditions.
* Prepare responsibility matrix and co-ordinate with all departmental personnel to produce best bid proposal to meet client requirements.

Project control:
* To analyze system generated reports to prepare weekly and monthly cash flows, monthly cost report.
* Liaise with various department personnel and collate information to prepare reports on cost overruns, forecasting cost exposure and monthly progress claim submission to clients etc.
* Budget allocation for procurement as per work breakdown structure (WBS) versus actual amount monitoring actual quantity procured versus budgeted quantity, prepare cost overrun summary
* Costing for variation orders
* Update list of P.O / V.O. to be back charged to client.
* Check P.O. invoices are in order for supervisor's signature for payment – cash outflow.

(ii) ERHA FPSO for Esso's Nigeria deep water project.
* Marking test packs on the P&IDs, preparation of 2,000 hydro-test packages from 7,000 ISOs, maintain test pack master register stating weight as per fit-up, welding, line check, hydro testing.
* Ensuring that the test packs are approved by client prior to testing and issued to site for hydrotesting.
* Supervise the tracing of the Ship Loose Items as per the Release Certificate.
* Submitting everyday status report to the owner with regards to how many spools fabricated and isometric drawings done.
* Coordinate with the client regarding the schedule of inspection and the system to be inspected.
* Line Checking / Punch listing of both Process and Utility lines. Prepare test and inspection report.
* Witness hydrotesting; hydrojetting, system leak test, flushing, reinstatement and commissioning.
* Resolving site issues like clashing of pipeline with different systems using the PDMS.

(d) SUT Sakra Pte. Ltd., Singapore (1999 to March, 04) as Senior Project Engineer.
Projects executed were of total value of S$ 70 million.

Piping and Infrastructure
(1) Piping: Utilities like High, medium, low pressure steam line, Boiler feed water, De-min water, waste water, High grade industrial water, Fire water both under ground and above ground in order to provide for redundancy. Piping was also done for Ethylene, Carbon monoxide and Nitrogen.
(2) Infrastructure: Extension of service corridor including 148 numbers of piled sleepers, sixteen numbers of pipe bridges of span 20 m and eight numbers of shafts for access to underground service tunnels.
(3) Plant modifications like strengthening of pipe bridges, additional sleepers in the service tunnel, changing of heat exchanger plates of Demin system etc.
Effluent treatment plant
(4) Fabrication and erection of Balance Tank, Bio-filters and Sludge Tanks including piping and instrumentation for the Effluent Treatment Plant.
(5) Inspection, Erection and commissioning of vendor packages like Dissolved air floatation and Belt filter press.
(6) Erection, air balancing and commissioning of HVAC system for the Effluent Treatment plant.
Maintenance
(7) EPC of heat exchangers of type plate / frame and shell / tube as per TEMA guidelines and pumps as per relevant API code.
(8) Inspection and repair of tanks in the tank farm periodically and before change of service.

Jobs were completed well within the schedule and budget.

(e) Mechanical Engineer, Toray Engineering Co., Singapore (1998 to 1999)
Project value: S$ 40 million.
Scope of work: SPAP 4 expansion project of Dupont, Singapore.

(1) Co-ordinated the piping for Utility equipments confirming to ASME B31.3. The job involved:
(a) Prefabrication, erection and installation of 130,000 dia-ins of C Steel, S steel 304, 316 piping.
(b) Witness NDT-- Post Weld Heat Treatment, ultrasonic test and Dye penetrant test confirming to
ASTM section V.
(c) Trace all piping works against the flow diagram (EFD).
(d) Check all test packages on individual pipe systems before hydrostatic test and pipe modification work.
(e) Consolidate punch list for mechanical completion and ensure construction is according to client's specifications.
(f) Tie-in to existing plant belonging to spinning and polymer areas including relocation of existing line to accommodate new equipment.

(2) Co-ordinated the erection of Utility equipments like Boiler, Compressor, Chiller and Cooling Tower.
(a) Equipment inspection- check against packing list, equipment dimension, check for defects (rust, flaws and distortion), orientation markings, size of bolts, center of gravity / sling position.
(b) Equipment installation- check location and dimension of foundation concrete surface, to confirm equipment hold down holes, location of anchor bolts and final application of grouting.
(c) Witness equipment setting and alignment-set and align at proper elevation and levelness within the tolerances.

(3) Co-ordinated the erection of HVAC equipments like Air Handling Units, Exhaust fans, ducting and Fire dampers.
(a) Resolving site problems like clashing of ducting with other systems.
(b) Liaison with Client, Project consultant and sub-cons for the R.F.I.s and Deviations.
(c ) Commissioning of Air handling units and Exhaust fans was done after completing the check list.
This included alignment of pulleys, belt tension and greasing of the bearings. Vibration, temperature and sound of the equipments was measured during test run.

(f) Yonkers Industries Inc- Schering Plough Pharmaceutical Project, Singapore, (1996 to 1997)
Position: Mechanical / Piping Engineer
Project value: S$ 250 million.

(1) Participated in commissioning of systems like Pure Nitrogen.
(2) Installation Qualification of a total of 146 systems as per their System boundaries.
(3) Preparation of Deviations and Punch list for all Systems.
(4) Ensure all piping was installed as per Isometric Drawings.
(5) Check the Test Packs for compliance of NDT and Pressure requirements as per the line list confirming to ASME B 31.3.
(6) To ensure pre-hydrotest line checking, hydrotesting and re-instatement is complete.
(7) Hydrotesting, flushing and blow-dry inspection of piping systems.
(8) Review the mechanical flow diagram in conjunction with piping specification to verify pressure test package limits.
(9) Application of Polyurethane Foam(PUF) insulation.
(10) Piping thermal insulation for cold and dual temperature service using composite layers of Foamglas blocks and surrounded with metallic jacketing.
(11) Assist in planning and scheduling of pipelines for insulation. Also verify pipes for any outstanding
NDT on weld joints prior to insulation works.

(g) Visakhapatnam Steel Plant, India (1986 to 1996)
(1) Worked as Maintenance Engineer. Job responsibilities included:

 co-ordinate repair of Heat exchangers including NDT testing-wet and dry magnetic particle test, Dye penetrant test, ultrasonic test and PWHT.
 Experience in maintenance of fuel oil supply system, water treatment plant and compressed air plant.
 Dry type has holder – (floating roof type) of diameter 40 metres and capacity 80,000 cubic meters
 Static equipments like Scrubber, Electrostatic Precipitators, Adjustable venturis and cyclone mist eliminators were checked for corrosion, deposits on the wall and vessel wall thickness.
 Preventive planned maintenance of equipments was carried out to increase their reliability. Rotating equipments were checked periodically for vibration, sound and temperature. Oil samples were analyzed for presence of solid particles. Alignment of centrifugal pumps using laser or dial gauge.
 Vacuum insulated evaporators for liquid Oxygen, Carbon-dioxide and Argon each of capacity 20,000 liters.
 Low temperature liquid pumps for Oxygen, Carbon di-oxide and Argon with discharge pressure of 170 atmospheres.

(2) As Operation-in-charge of Gas cleaning plant and Gas boosting station following jobs done:

 Scrubbers, venturis and cyclone mist eliminators were used to reduce dust content of gas from 200mg/cubic meter to 5 mg/cubic meter and temperature of gas is reduced from 200 degree centigrade to 40 degree centigrade.
 Gas boosting station pressure of gas supplied to Boilers, Rolling Mills was increased from 600mmWC to 1200mmWC using Centrifugal Compressors.
 Using reciprocating compressors pressure of gas supplied to gas turbines is increased from 600mmWC to 10 Bar.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6501 to 6550 of 9777)

Go to Search Parameters...

Brief Description

7 years experience in the oil filed, (Mudlogger, Data engineer and a pressure engineer)

MBA - Analyst / Commercial / Supply Chain - Oil & Gas

The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo

Ten Years Of Effective Managerial/Sales Experience At The Professional Level

I am in a position to take full and independent charge of major plant overhauls related to boiler and its auxiliaries, intake equipment, fuel gas station and fuel oil handling station

Electrical Technician/Cell Phone Technician

Project Management

Electrical Engineer - Design and Estimation

Trouble-shooting of instrument like GC and HPLC analysis of raw, intermidiate and finish goods

Procurement, Supply Chain and Contracts Professional

Country/Sales Manager Africa

Oil and Gas Drilling Professional

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

• Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles

Eight - year experience in Civil Engineering Projects.

Dynamic Supervisor for Oil and Gas plus Engineering in the Pipe Fitting and Boiler making industry

2 year of Subsea pipeline design experience and 2 years of post-graduate Research & Development experience in Hydraulics, Costal and Maritime related area.

7 years of diversified experience in the field of Quality Management Systems. Summary : Looking for a better placement within the Oil and Gas Industries preferably in the field of Quality Management System and Document Control.

ABB Thailand 3 Year ABB Industry Singapore 3 year Raywins Engineering Solution 6 Month at present time

P G Advance Diploma in Industrial Safety + NEBOSH + B Sc [Chemistry] with 4 years of experience as an HSE Professional.

Degreed, certified and innovative IHR professional with 4 yrs generalist and 2 yrs training experience, multilingual and adaptable.

self motivated, graduate in mechanical engineering with certificate course of certified petroleum manager having 10 years hands on experience in petroleum terminal operation.

Health and Safety Engineer. Well qualified for the position of Health, Safety and Environmental Manager in the Oil and Gas Industry. Ten years of senior experience as a Health and Safety Engineer.

I am a proactive self starter/confident young result oriented Client/customer services Professional/Director with a privately owned company in nigeria with over 10 yrs of experiences in the field.

Degree in Mechanical Engineering / Mechatronics from Jordan university of science and technology. Main experience: installation of surface wellhead equipment. Previous experience: coiled tubing operations. Courses mainly in the oil & gas industry.

Techno-commercial back ground , working as senior inst. engr in a petrochemical plant in the capacity of deptt. head. Having a experience of around 7 years in steel,agro and petrochemical plant. B.E. (Instrumentation) + MBA(marketing)

Strong structural engineering knowledge, Energetic, Good analytical thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

Objective: It is my objective to become a contributing member of your company and further my knowledge and become a great asset to your company. I have experience with people and different countries and Cultures and plan on furthering my knowledge and skills with your company.

Process Engineer with 6 years professional engineering experience in offshore oil&gas industry on fixed & floating installations and gas terminals. Experience covers Conceptual and detailed design of equipment, debottlenecking studies, process simulation, plant modifications & Flow Assurance

10 yrs in Well Testing, Downhole Operation, Asset Management, HSE/QAQC, B. Eng- Petroleum Engineering.

I am an hse professional having qualifications like MBA,NEBOSH and IOSH, presently working in Afghanistan as HSE officer in KBR(UK) , I am willing to work any where in the world.

Free! Senior CMMS engineer and business Analyst with expertise in Oil & Gas Maintenance, Material Management and Procurement; CMMS implementation, plant data collection and quality check; Business process engineering and business information reporting.

Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

Working as a safety officer on qatar shell gas to liquid project

Have working experience in 6 countries; around 15 years of experience in Project Management, Project Engineering, Engineering Design, R&D, Construction, Technology Management and Business Development. Have extensive experience in subsea/offshore pipeline, cross-

Highly accomplished, self motivated and performance driven young professional

Automation, Motor controls, and Programmable Logic Controls

I am an imaginative, innovative and dedicated safety professional with in excess of 10 years experience gained from working for Oil & Gas, Construction and seismic industries(onshore & Offshore),

Estimating Engineering for Oil & Gas Projects from FEED to EPC stage.

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

I have extensive experience in coal analysis, material distribution systems, combustion systems, power generation and all associated chemical processes

Mechanical Engineer with expereince in AutoCAD 2000, Piping, Welding, Installation and Erection Works, Production Plainning, Supervision

6 years experiance in Air seapration Plant

Experienced welding engineer

Mapping Specialist

B.Tech in Electronics & Instrumentation, working on under water hydrographic equipments

Looking for a MWD career

Skills: Tally, Daceasy, ATG (KSA), Digitek (KSA), Windows / MS Office & Tools etc.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 [ 131 ] 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out