Resume - Electrical instrument enginer, Prject engineer, maintenance, Loop checking, test...

Misco Jobs

Resume #60908

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
A qualified electrical and instrumentation engineer with extensive experience and an exceptional track record in design, supervision and installation of electrical and control systems and equipments for various high end projects. Seeking a senior engineering post with a well-reputed engineering organization to make technical contributions that translates to tangible contribution to the financial bottom line.

KEY SKILLS:

* Project, Financial & Operational Management, Value Engineering, Costing, Budgeting
* Leading Teams, Strategic Planning, Quality Control, Inventory Management, Procurement
* Familiar with international codes and standards,
* Review FEED (Front End Engineering Design)
* Prepare QCP (Quality Control Procedure) and ITP (Installation Test Plan)
* Installation & Maintenance of Electrical Instrumentation Equipment, Calibration, SCADA, PLC, DCS
* Liaising with Subcontractors, Suppliers, Manufacturers and Clients.
* Strong interpersonal and communication skills, Analytical thinking and Negotiation skills
* MS PowerPoint, Access &Office Applications, Networking, PLC Programming, Embedded Systems Engineering
* Schedule Planning, MTO's & Progress Monitoring, DWG Design Shops, Cable & Drums Schedules
* Procure permanent and temporary material. Liaise with suppliers for early delivery.

WORK EXPERIENCE
CONSOLIDATED CONTRACTOR INTERNATIONAL CO.

Qatar - QAPCOII Project 2005 – Present
Contract Value: US$ 56 Million.
Project Engineer (Electrical & Instrumentation)

Responsibilities:
* Acting construction manger during the construction manager leave.
* Coordinating and controlling all financial and operational aspects of assigned project, by liaising with other engineering departments as well as clients. Supervising engineers under purview, addressing design anomalies and onsite problems.
* Planning and budgeting, manpower, finance and timelines for E&I activities. Reviews productivity, contract & tender documents/responses, technical & financial evaluation reports.
* Review subcontractor agreement and Liaise with subcontractor for schedules and work execution plan.
* Reporting on a daily and weekly basis to the upper management.
* Researching, identifying, designing, installing, purchasing, developing, testing and maintaining electrical measurement and control systems. Devising ways to control mechanisms by applying automation techniques and computer-aided processes.
* Preparing manuals of specifications, maintenance procedures, trouble-shooting manuals for construction and refurbishment of new and existing setups.
* Creating equipment/Installation specifications and control philosophies & function descriptions, instrumentation data sheets for, transmitters, switches, Control Valves etc.
* Ensure all work comply with quality standards and work carried out in accordance to the installation test plan.
* Technical background in Completing Pre-commissioning. Using DCS System, TDC3000, PLC Modicon and Triconex, to perform loop and functional checks on all motor controls, pumps, compressors and other equipments, for all analogue and digital inputs/outputs. Verifying operational parameters and alarm/shut down set points. Computing key design parameters and personally modifying as per the operational narratives.
* Implementing modifications in existing design setups to address any discrepancy and adhering to client specifications
* Preparing and implementing shut down schedule
* Prepare mobilization and demobilization plan for manpower and equipments.

Other Major Projects to credit
1.RMSGPP – Rass Laffan to Mesaeed Sweet Gas Pipeline Project. 2004
Client: QP – QATAR PETROLUIM -
Contract Value: US$ 77 Million.
Position: E&I Section Engineer
* The project is new installation of a 120 Km Sweet Gas Pipeline from Ras Laffan to Mesaeed Sweet Gas Pipe Line Project. With installation of three new stations (SBV – Section Block Valve Station) and extension of five existing stations. The scope involves instruments installation, PLC, SCADA system, F&G system, Telecom. System, Transformers, Switchgear installation, lightings and cathodic protection.

2. QAFCO-4 Expansion – Qatar (Q4) -QAFCO – 4. 2003
Client: KRUPP UHDE/QAFCO S.A.Q.
Contract Value: US$ 77 Million
Position: Instrument Site Engineer
* The Project is the third phase expansion of an existing fertilizer plant.

3. Project: Polyethylene, 1 – hexane & Off Sites Projects - Q-CHEM (PEP) 2001
Position: Instrument Site Engineer
* The project involved the construction & pre-commissioning of complete Polyethylene, 1- Hexanes & Off Sites.
* Executed more than 7000 DCS and Triconex PLC Loops as a part of pre-commissioning activity.

4. Project: QVC Vinyl Project at Messaieed – Qatar 2000
Client: Qatar Vinyl Company
Contract Value: US$ 100 Million
Position: Instrument Site Engineer
* Engineering, procurement, construction and commissioning of a complete process plant based on ethylene as feed-stock. Producing 220, 000 tons of VCM and 180, 000 tons of EDC per year. Also a complete chlorine producing 270, 000 tons per year.
* Executed more than 4000 DCS loops.

5. Project: Onshore Gas Development Project (OGDII)-Phase II, Abu Dhabi- United Arab Emirates. 1999
Client: Abu Dhabi National Oil Co. (ADNOC)
Contract Value: US$ 75 Million
Position: Instrument Site Engineer
* The project involved the full construction of civil works, steel erection, piping works, product pipelines, mechanical works, electrical and instrumentation works, modification and revamping of OGD I, as well as pre-commissioning.

6. Project: AROMAX BENZENE & CYCLOHEXANE Facilities Project-Jubail (SCPP) 1998
Client: Chevron Petrochemical / Chiyoda
Value: US$ 75 Million
Position: Jr. Instrument Engineer
* Engineering, procurement, construction and commissioning of grass-root 480, 000 MT/year of Benzene and 220, 000 MT/year of Cyclohexane facility at Jubail. It also involved construction management of the administration building.

Highlights:
* Rewired the control for 6.6Kv Switchgear as per the vendor details in order to make the system operational as per the design philosophy.
* Loop checking, Pre-commissioning in charge
* Buildings lighting and small power work.
* Develop my subordinates and fresh graduates skills.

EDUCATION
* APPLIED SCIENCE UNIVERSITY February 1998
Graduated the Bachelor program in Electronics and Communication

TRAININGS
* PMI/PMP Course, On going
* CCNA.
* Team Work Seminar.
* Cost Control Seminar for one week
* Safety Seminar indefinite number.
* Leader ship seminar one week.

MEMBERSHIPS
* April 1998: Jordanian Engineering Association- Member
* August 2002: Australian Engineering Association - Member

LANGUAGES
English: Fluent spoken and written
Arabic: native spoken and written

PERSONAL DETAILS
Date of Birth: 28 September 1974
Nationality: Jordanian
Marital Status: Married with two cute kids.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9601 to 9650 of 10917)

Go to Search Parameters...

Brief Description

I am a male, 25 years old, D3 Graduated of Politeknik Negeri Bandung, Majoring of Mechanical Enginnering. I am a well organized person, hard worker, and have a good dicipline. I have had experience in working in industry. So I know I can do this job excellently

Today professionals must become part of the company’s teamwork approach to accomplishing projects on time and budget. doing things differently, more effective, or more efficiently. I search for Early Responsibilities, achieve Technical Challenges.

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.

Troubleshooting

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

Bachelors - B.A., Applied Mechanical Engineering

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

willing to work in a challenging Electrical carrier

A Credit Analyst and an Administrative Officer for more than 2 years, experienced in Accounts Receivable Management and other Administrative works.

To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;

Exploration,Groundtruths-GPS,Drilling - Log analysis,M.Tech,81%, Geological Remote Sensing and GIS,Centre For Remote Sensing,BARD University,2005

Ability to prepare leases, comprehend legal documents, titles, surveys, legal descriptions and contracts

Experienced Graduate Mechanical Engineer & Post Graduate (Marine Engineer) from United Kingdom HOLDING COC (CERTIFICATE OF COMPETANCY), With Shipping background,Drydock,Offshore & Sailing experience as Engineer Office in Command. I have 7 ur on hand experience on International Level.

Safety Manager/Auditor with Fire/Security and Enviromental experiance

Laboratory Analysis, Administration, Safety

I am a versatile professional, with experience in Construction and Oil/Gas industries. Have worked under very professional environment both onsite and, management levels. My experience and expertise in the field of management and or site, will be very beneficial for any hiring organization.

Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.

Wire line Operator, Well service and Production Operator.

DP Junior experienced in Ultra Deep Water Drilling.

Totally, more than 18 .6 years of experience in Diversified Fields, of which 15 years in Retail Trade in a Service-Related industry & 3.6 years in Wholesale Trade.

Bachelor of Commerce (Computer Application)

Geologist available immediately for contract work in Mineral or Oil & Gas Exploration and Environmental

VBA Programmer for Microsoft Access and Excel

As a professional in oil and gas industry with 10 years experiences, I have been working in various positions : Supervisory; Instrument- Control, Power System, Reliability Engineering; and Maintenance Planner. Within these positions, I have greatly enhance my analytical & mangerial skills

Mechanical Engineering Technologist

A chartered marine technologist with a broad cross discipline outlook with particular experience in the legislative, quality and risk management aspects of the upstream oil and gas industry.

Provide Project Control Scheduling Support

Over 14 years of professional experience of Design, Draughting and Checking of Plant layout and Piping System.Conceptual & detail engineering like Preparation of Plot Plan, Equipment Layout, Piping Layout, Piping Isometrics, Nozzle Orientation & Bill Of Materials preparation.

5+ yrs. experience in the petroleum industry, extensive knowledge of drill data analysis, drill rig site tech support, drill bit technical sales & support, BHA & Hydraulic designs, seismic data & gas transportation data analysis, hard worker and solid work ethics.

LANGUAGES Basics of C & C++, OPERATING SYSTEMS MS-Office, Windows 2000, XP. APPLICATIONS MS-OFFICE

Bachelor Degree in Mechanical (Industry)

Electrical instrument enginer, Prject engineer, maintenance, Loop checking, testing, operation, elctromechanical, F&G, ELV, MV ...etc

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

I possess a strong background in the areas of well stimulation and completion. I am a straight-forward, personable leader with the experience, capability, and focused decision making talents needed to serve as a valuable asset to your organization.

Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto cad Software

A position that will utilize my 10 years of Administration, Recruitment, Education and Tourism experience in positive & sustainable contribution to organization and self with challenging working environment.

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

Project & Contract Management, Project Control, Planning, Estimation & Proposals

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

A 41 years young, energetic and Resourceful, a graduate from college of education Ekiadolor, Benin City, Edo State with National Certificate of Education (N.C.E) in Economics and social studies with 13 years experience with Dickson international limited (Offshore), Niger Construction limited (Onsho

Very skillful, motivated person looking for a job overseas

Offshore Materials & Logistics Coordinator / Controller

Over 25 years of design and engineering experience; providing design, engineering and management services for a variety of projects and fields. Expertise includes estimating, conceptual and finalized layouts, piping design, instrumentation, process, P&ID development, sizing/specifying/requisitioning

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 [ 193 ] 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out