Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #60954 next resume »»
CONTACT INFORMATION:
View contact information...

Please paste your resume here. Don't include 'Contact Information' because it will be added automatically from corresponding field above. If you used symbols/special characters such as bulletted lists make sure they are properly displayed. We suggest you to replace bulleted list symbols with minus symbol (-).
THALASSERY
KANNUR (Dist)
KERALA STATE
PIN- 670107
INDIA.

Subject: Application for the post of Instrument Technician
(Prefer Offshore or on/ off jobs)

Objective: Seeking a challenging career with in a reputed
Organization that will best utilize my skill and enhance my professional growth.

Qualification: I.T.I in Instrumentation
(Govt. I.T.I Kannur)
Computer
Knowledge: M.S.Office

Experience: Presently working in Kuwait Oil Company's north oil field under
PETROFAC FACILITIES AND MANAGEMENT LTD
From 18.09.2005.

: Worked as an Instrumentation Technician in QATAR PETROLEM REFINERY shutdown under Doha Petroleum Construction Co contract from 16.03.05 to 17.05.05

: Worked as a Control Technician in ABUDHABI for Descon Engg Co in Borouge Polyethylene plant shutdown from 22.12.04 to 16.02.05.

: Worked as a Instrument technician in
SADHAV Offshore Engg Co on ONGC Contract in TITAN department from 13.01.2004 to 30.11.04.
(Mumbai High Oil Field)

: 2 Year experience in Kochi refinery as Instrument technician
Under contract system

: 1 year Apprentice in Kochin Refinery as
Instrument technician

Note: I am a Permit Applicant under KOC work permit system.
Undergone KOC HSE Training.

Duties and
Responsibilities: > Calibration, Repair, Loop checking.
> Cable glanding and termination.
> To attend preventive maintenance and corrective
Maintenance of process control instruments in running plant.
> To maintain calibration records for critical instruments.
> To attend and fix the problems after receiving request from Process Dept. on priority basis.

Conversant with (Field Instruments)

„« Kent, Rosemount, Fuji, Honeywell,ABB (SMART& Analog).
„« Taylor, Foxboro, Fisher, Yew Electronic Transmitters and Controllers.
„« Familiar with PT 100RTD and Different types of Thermocouples.
„« Masonelan, Tokyokeiso Float type and Displacer type level Switches.
„« Masonelan, Magnetrol and Foxboro level Transmitters ( Displacer type & Proximity)
„« All types of control valves(smart also), ESDV¡¦S, SBDV¡¦S.
„« Fire&Gas Systems ( Smoke, Heat, Flame & Combustible Gas Detectors, Manual call Points, CO2 Systems, Deluge Systems etc)

Associated Systems

„« HONEYWELL( TPS,TDC3000),ABB, YOKOGAVA CENTUM (CS/XL)
„« HONEYWELL FSC,GE FANUC
„« MARK V Turbine Control System (GE)

Experience in
Details

I have worked in various Mumbai high oil process platforms in TITAN section.TITAN means Telemetry Instrumentation Telecommunication in an Automated Network. Our job is to maintain a good communication between process platform and various unmanned platforms (wellhead platforms).
I am well experienced in maintenance jobs occur in unmanned platforms like checking and calibration of field instruments, Remote Telemetry Units (RTU), Radios, Solar panels, Charge controller, Batteries etc.Also have experience in cabling, Installing and commissioning of man Access Control Systems in offshore platforms and rigs.
In shutdown we used to recalibrate and reinstall almost every field instruments such as Transmitter's ( Pressure, Temperature, Differential pressure, Level ), RTD¡¦s, Thermocouples, Level switches, Pressure switches, Temperature switches, Control valves etc. We calibrate both level and interface level transmitter's using wet and dry leg application.
Presently working in KOC's North oil field Gas Booster Station BS-131. In BS-131 it has mainly 6 Nuvao Pignone Turbine Compressors with Mark 5 control system by GE. It has also Bently Nevada vibration monitoring and Fire and Gas system by Detronics and Sieger.It has HONEYWELL control system ( TPS) and FSC.Also. In shift duty we have to attend on call duty in Crude Gathering Centers, Pumping Stations, Water injection Facilities etc.Our team has indulged in start up of Compressors ( Instrument Air, Gas ), CRU's. Heaters and also fix problems in Deasalter, Separators, Booster Pumps etc.

Academic: S.S.L.C Passed with 65%
Qualification P.D.C Passed with 44%

: STCW - 95 (PST, Survival at Sea, Basic Fire Fighting, Safety at Rigs & Platforms, Elementary First Aid )

Salary Expected: 1500US $ ( Monthly)

Availability: 15days Notice Period

Passport Details:
Passport No: E3790715
Issued Date: 14.11.2002
Expire Date: 13.11.2012
Place of Issue: Kozikode

Hope the above mentioned experience suits your requirements. All the original documents shall be produced as and when demand.

Date: 30.07.2007

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6401 to 6450 of 10848)Go to Search Parameters...
Brief Description
Camp Boss
Service Engineer, Completed Aircraft Maintenance Engineering (3 Yrs)
Over three years title experience in the Barnett Shale. Experience leasing in the Barnett Shale and Fayetteville Shale. Advanced experience using ESRI GIS mapping software.
Instrument Technician with maintenance and commissioning experience
Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.
Currently attending Saint Tech College and will be graduating in may.
Application for the post of Safety Officer
Safety Supervisor
Application for the Post In Engineering Department
Seeking a challenging career with in a reputed Company
This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.
More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming
Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.
Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.
Engg.graduate with exp.in projects at various Breweries in India
actual position: Senior well site geologist
Senior Qa/QC For Oil/Gas Projects
Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning
LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization
Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.
Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar
My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.
Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.
A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.
a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable
Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.
Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience
My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.
Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.
selling ABB Instrumentation Products Range, which includes the Installation, and commissioning.
An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.
Camp Supervisor Unit Manager English and French Teacher Sales Representative English Teacher (Sociology and Politics Departments)
With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.
I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.
As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.
Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.
Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.
Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. Extremely keen to have the opportunity of working within the any function in the oil and gas industry.
Please accept my resume for consideration.
Throughout the last five years I have gained valuable experience in both the academic and work related worlds and I am looking forward to applying my acquired skills to the position you have available.
Mechanical engineer.
Extensive experience in gas operations,vast knowledge of its systems and procedures.Considerable experience planning, putting together, maintaining and managing new facilities.Superior managerial, organizational and inter-personal skills that produce results.
Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure
I am a first class degrees holder in BE (Mechanical) and M.Tech (Energy Systems) and I have 2.3 years experience in the field of piping design and pipe stress analysis engineering and looking for a job in a reputed concern
I want to work in your company to improve professional skills, to obtain an engineering position in a petroleum industry which will enable me to utilize my analytical and interpersonal skills. Engineer with broad experience in seismic exploration, especially in the sphere processing 2D/3D data.
Analysis and Design of various Structures Analysis and design of vessel
Early Career Petroleum Eng, with trilingual (Incl Arabic) and Dual Master's degree (Petroleum and Computer Science).
An international, multi-lingual, technically proficient Sales & Marketing professional
I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.
Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   [ 129 ]   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com