Resume - joined as shift driller and elevated to drilling superintendent. experienced in ...

Misco Jobs

Resume #6119

CONTACT INFORMATION:
View contact information...

BIO-DATA

2.Date of Birth: 01/07/1957
5.Nationality: INDIAN

10.Academic qualification: B.E (MECHANICAL )

University / Institution: BHOPAL UNIVERSITY
Degree / Discipline B.E (MECHANICAL)
Year 1975-80

11.Area of specialization: MECHANICAL ENGG.

12.a. Experience in ONGC 22 years 6 months ( 22 ½ years )
b. Experience before joining ONGC NIL
c. Total Experience: 22 years 6 months ( 22 ½ years )

WORK EXPERIENCE

Joined in ONGC on 3rd October, 1981 as Asstt. Executive engineer(Drilling) and posted at Assam, Eastern Region of India.

1981 – 1984:

 Worked as Shift In charge and Rig In charge in Mechanical, electrical and Romanian rigs of type-I, type-II and type-III.
 Worked in all field of Eastern Sector of India like, Lakwa, Galeky, Rudrasagar, DVP, Cachar and silchar. Worked to the best satisfaction of self and superiors.

 Attained a good command in all drilling and completion operations (depth range from 2500 – 4500 mts.).

1984 – 1990:

 Self was selected out of 60 batch mates by the higher officers to attend training in directional drilling at Texas Houston, USA and attended same in 1984.

 Served in ONGC as Directional Driller and I/C. Directional Drilling and drilled more than 200 directional wells at Eastern Region, Assam, Horizontal Drift ranges from 100 to 1500 mts.

 Side tracking the well Sonari – 1 in 8 ½" phase during the year 1986-87 at depth of 3400 mts. After section milling of 9 5/8" casing around 25 mts in a milestone.

 Self is one of the responsible officer in switching over mode of recording Directional Survey from Russian Sangina- Kolina method and introduced American NL-Sperry-Sun method at Assam, India.

 Taken active part in introducing "cluster locations" drilling at Eastern Region, Assam. Maximum 6 wells drilled from a single cluster, hence minimizing the cost of land acquisition and Rig Building.

 Introduced long reach directional drilling profile at Koraghat, DVP by working and interacting with work representatives from schlumberger and drilled 2 wells at Koraghat with HD ranging from 1000 – 1500 mts. At TVD 2000-2500 mts.

 Introduced jetting deflection technique first time in Eastern Region at Demalgaoh field and adopted subsequently in all other fields of Eastern Region.

 Selected and undergone training at USSR in super deep drilling techniques in 1986 for three months. Acquainted with different types of casing policies and method of lowering casing both in conventional and non-conventional sizes.

1990 – 2000

 Transferred from ERBC to SRBC, K.G. Project, locations which are situated in coastal and central Andhra Pradesh, India with high temperature and high pressure variations where self established Directional Drilling cell at Project level in Rajahmundry Head Quarters.

 Completed PSP #8 and Mandapet#5 wells successfully under my supervision which were under complications for last so many days. HD of PSP#8 and MDP#5 were 0.8 and 1.5 KM respectively at TVD of 2500 and 3500 mts. respectively.

 Side tracked the deep well Bhavadevarapalli#1 in 17 ½" phase with a gap of 3.9 mtrs. successfully where casing got parted at 500m.

 Introduced cluster locations drilling at K.G. Project, Rajahmundry which reduced the cost per meter and land acquisition and Rig building.

 Establishing Tech. Cell in addition to Directional Drilling cell in K.G. Project which is responsible for well planning, design, bit selection, documentation and operation monitoring while drilling the well.

 As a member of Bit committee conducted a detailed study on drill bits and log data of drilled wells in 1994-95. Made a presentation before board for bit evaluation and recommendation of suitable bits for different wells at different locations.

 Practically made different trial test of drill bits in different fields and established suitability of bits for different depths so as to minimize rig days and cost.

 Well experienced in designing drilling and completions programme of wells of shallow and deeper depth ranging from 2000 – 4500 M. and high temperature and high pressure variations of order 350-400 degree F. and hyd + 10% - 90% respectively.

 Designed many wells in Amalapuram mud loss prone structures with high pressure of order Hyd + 60% with a suitable casing policy to drill the wells up to T.D. successfully.

 Established blind drilling technique while drilling at mud loss prone zone ( lime stone) in Amalapuram structures.

2000-2003

 Day to day monitoring & guiding different operations of 8 drilling rigs from drilling to completions successfully.

 Attending operations when the rigs are in operational crisis.

 Design and monitoring of directional wells and rig deployment as and when required.

 Well planning, GTO preparation of all locations taken up for drilling.

2003 TO TILL DATE

 transferred to Eastern India, Agartala and posted as installation manager for the rig E-1400-XIV.

 to attend complicated well drilling operations in any other rigs of the project as and when requires.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 9922)

Go to Search Parameters...

Brief Description

Materials Management, Logistics & Supply Chain Management, Stores & Inventory Control, Warehousing & Distribution, Coordinator.

Qualifications: BSC Electrical Engineering, Corporate member of the Institute of Electrical and Electronic Incorporate Engineers,

More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.

Industry and project experience in developing, analyzing, training and implementing simulation and advanced process control for refinery, chemical, and petrochemical operations.

Rig Manager/ Drilling Superintendent/ Drilling Supervisor.

17 years of experience in all phases of plant operations, production, trainning, environmental

A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.

Drilling Manager/Superintendent/Engineer with 14 years of international experience.

Project Management; General Management; Commercial Management; Project Director; Oil & Gas, Petrochemical; International; EPC/EPCM, Construction, Contracting, Joint Ventures; 30 years experience; Successful track record; Flexible and adaptable.

Operations Manager/Field Engineer - Borehole Seismic

Experience in project management, design, front end engineering, installation, testing and commissioning.

I offer demonstrated success in managing culinary and business operations activities at Defense Contracts, remote site and offshore locations in over eleven years of management for international catering companies.

I am an energetic, hardworking candidate. I am seeking an entry level opportunity.

Having, 21 years in Instrumentation Field, Maintenance, Project and Execution includes Oil and Gas and Power Plant Experience with Gulf Experience more than 7 years. Having good exposure to PLC and DCS, with Leading Role responsibility

Experienced and dedicated Land Acquisition specialist. Numerous major projects. Qualified and creditale references. Available soon. John Kellock

Obtain a position with a company that is a leader in the Drilling and Completion Fluid Markets of the Oil and Gas Industry. I offer my experience in product conception, presentations, extensive research and development skills

I'm a post graduate in M.Sc., engineering Phy & Instrumentation and having total 16 1/2 years hands-on experience on Control & Instrumentation systems (Maintenance and Projects ) being used mainly in Power plants /Steel /Pulp & Paper and Cement .

joined as shift driller and elevated to drilling superintendent. experienced in directional drilling. exposure in design, planning, drilling and completion of wells.

I graduated Texas A&M University '99 with a degree in Management, and now look to continue my career in Oil and Gas, either offshore or onshore and to dramatically increase my responsibilities and push my limits. Seeking a position as a Safety Coordinator or in Production or Operations.

General Manager - Latin American Based. International standards.

Over 20 years experience within the Oil & Gas, Power Generation, Construction and Marine industries including Owners Representative, Project Manager, Project Engineer, Senior Mechanical and Senior Process Engineer. I have worked for Developers, Operators, Consultants and EPC Contractors.

Have 22+ years of professional experience in carrying out all Operation related jobs in Gas Processing & Petrochemical units. These relate to both Commissioning & Startup. Also, well versed in Process modification / plant debottlenecking schemes.

Experienced B. Dev'l/Mgmt/Oprn candidate w/domestic and international background. Prepared budgets, forecast's, P & L's, BOD & Shareholders reports, overseen the successful startup of many Int'l BU's & Projects.

I have twenty years experience as an operational & developmental geologist. Currently involved with Barnett Shale development in the Fort Worth Basin. Desire and qualifications for both management and operational positions with the ability to generate prospects and revenue..

Qualified tradesman, Electrician 17 years Project Management Experince includes all trades Working on Syncrude UE-1 Project

Diverse, international, multidisciplinary technical and management background with primary focus on field development/exploitation, rig and subsurface operations, production surveillance and optimization, and cash flow management. Track record of continuous improvement in field exploitation.

Looking for a challenging career with a progressive company as an instrument & controls specialist to demonstrate international versatile experience and leadership capabilities in the field of instrumentation and controls.

Rotating Equipment, Maintenance Best Practices and Maintenance Excellence, Lean Manufacturing, GMP, "Toyoto Process", Asset Management, RAV, ROI, Audits, project management and Design Teams, Deming Trained.

Professional engineer,17 years, heavy & conventional oil, oil sands & gas. Expertise-hydraulic fracturing, well testing, reserve analysis, property evaluation, simulation, log analysis, workover & stimulation, water flooding, steam stimulation, SAGD, horizontal well. International. Multilingual.

Graduate in Petroleum Engineering.

SUMMARY OF QUALIFICATIONS AND ACTIVITIES 25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. HAZWOPER Certification

1. Graduate with POST Graduate diploma in Materials Management with more than 17 years experience 2. Presently working as Material Controller under computerised environment 3. Good knowledge of Windows 4. Certified Internal Auditor for ISO 9001:2000 QMS

Steam and Power Specialist

18-year experience in Procurement, Warehouse and Project Management, Construction Supervision and Supply Operation in Petroleum and Purchasing Services Industries. Also 6 years in SAP implementation projects working as functional consultant in Logistic and Material Management

I am looking for a project or production engineering position.

Twenty-four years experience in onshore and offshore oil and gas law, land management and land services, including titles, contracts, acquisitions and divestitures, due diligence, litigation support, legislative review, environmental and regulatory issues and management of land personnel.

Hydrocarbon Measurement Specialist/Expert (PE) 25 years experience Current Measurement and Allocation Advisor BP GoM Deepwater Experience E&P, Pipeline, Refining/Chemical Last 5 yrs concentrated on subsea systems, multiphase and wet gas measurement, process simulation and phase-behaviour models

A geologist with a strong technical background in reservoir analysis, geomodelling and IT. A broad range of work experience within major oil and service companies and consultancies over 8 years. Well developed communication skills to all levels of management and clients

Marine Engineer First Class Motor FG (Unlimited); Tanker Endorsement (Product/Crude) 23 years Marine Industry experience; Tradesman Fitter And Turner; Seeking a position as Chief Engineer on a DSV type vessel or as a Mechanical Supervisor /CSR in a related role on or off shore.

TAKING CARE OF REMOTE CAMP IN OIL RIGS

Former Schlumberger Senior Field Engineer, operations and maintenance in land and offshore. Maintenance eng. for camp and drilling rigs in the Peruvian jungle, By now I’m supervising the maintenance of 5500 instruments in a major copper / zinc.. I´d like to work Overseas.

A wide range of experience in the field of Petroleum Engineering: petroleum engineering instructor; sales and marketing of oilfield equipment; business development; tender preparation; management and project management skills; MS Office and MS Project; driving licence;

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

Twenty-six years in Offshore and Oil & Gas related engineering including FEED and TIE-IN work Twelve years Intergraph PDS (Equip. & Piping modelling Drawing Manager & Microstation). Including Isometric trouble shooting and PDS back-up support. ‘Optimeyes’ (Fluor Daniel CAD drafting system)

Over 25 years of diversified production and operations experience in the Northern Rockies with Majors and Independents. Unique background of field experience through petroleum engineering, operations, supt. positions and supervisory positions.

27 Years in Oil & Gas Procurement Industry. 15 years living / working in Saudi Arabia . B.S. in Business / Certified Purchasing Manager

Geologist, 17 years experience with major Oil Company in various international settings (Europe, Asia, Middle East and Africa) both as development- and exploration geologist. Analytical and flexible. Swiss national.

I am a QHSE individual but can crossover to other areas. The resume covers my international experience and gives information on my skills.

23 years experience in construction and project management professional with expertise in all facets of offshore oil and gas projects, pipelines, refinery and petro-chemical plant. Successful completion with various owners such as SHELL,TEXACO,UNION OIL, EXXON, ONGC, PEMEX, PETROBRAS

Dear Sir, I am applying for drilling personnel in the Philippines. I am a Filipino electrical engineer temporarily working in the USA. My permit will expire soon and I will go back to the Philippines. I once worked as assistant oil drilling engineer in the Arabian American Oil company.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out