Resume - Instrument Technician with over 25 years experience in Project Engineering, Fiel...

Misco Jobs

Resume #62589

CONTACT INFORMATION:
View contact information...

Personal Profile

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC's, and DCS's. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the National and International Market.

Strengths
Able to communicate at all levels; prepared to follow up and complete breakdowns; have mutual respect for co-workers in various fields with in-depth knowledge of interface requirements within multi-disciplined projects such as mechanical, piping, electrical, software and safety; enjoy implementation of new equipment and ideas. Participate in project hazardous Analysis and Operability Studies and safety reviews as part of a multi-disciplined team. Review project technical submissions to ensure compliance with internal and international engineering standards.
Over 5 years experience with an International Company (Lucite International) recognized for its Extreme Safety Standards.
Career History
ESCOM OCGT Plant Mossel Bay
August2006 to July2007
Contracted to Siemens Ltd as Site Manager for the Electrical installation of 3 Open Cycle Gas Turbines which drive 150 Mega Watt Generators. Initial scope of work was to supervise and control off loading of some 500 tons of equipment per unit into Siemens lay down area. The second shipment arrived some 4 weeks later followed by the third 5 weeks thereafter. Assisted by Safety and Quality Manager, Site Commercial, Sub Contractor and Siemens AG Electrical Installation Manager all planned project dead lines were met even though no project plan could be adhered to due to delays by civils. Daily activities included morning meeting with Siemens SSM, weekly report, and monthly progress claim. Staff recruitment escalated from 10 members to a peak of 158 as access and acceleration patterns had to be met. Some 110 km of cable were laid and 4000 termination completed. On completion of the bulk of contract Siemens Ltd were congratulated by D. Timm Siemens AG Electrical Installation Manager for a job well done.

S.A.B. Breweries Prospecton –Durban
January 2006 to July 2006
Contracted to S.A.B. via Dynotronics, immediate function was to take over daily maintenance of high speed beer bottling, pasteurising, keg, and packaging plant, there after plan and prepare and execute shutdown on line 6 3 5. Achieved status as 'Builder of the Week" a first for any contractor normally reserved for permanent employees.

Engen Oil Refinery –Durban
August 2005-to November 2005
Contracted to Kentz for the Clean Fuels Project, Inspect calibrate commission all Honeywell (Smart) flow, pressure, temperature transmitters, Fisher field view valves and positioners. This equipment was linked to the Honeywell TDC 3000 and ESD systems. My secondary function was "Selling" Loops or Pack's to the client, first to Fluor and then Engen. The project was run on a tight schedule and working 140 hours per fortnight was the order of the day, Kentz E&I were congratulated by the Client for a "first "in the history of completion ahead of schedule.

Natal Analytical Services
February 2005 – July 2005
Joined a small Analytical company as this promised to be an exciting challenge which I was hoping to be a part of by providing a service in this field after the new Pollution Bill was passed in February 2005
The ranges of equipment I have been exposed to in this field are:
Procal Stack Monitors
Mipoy Laser Dust Monitors
Monitor Lab (Environmental machines monitoring 02, S02, N02, C02)

Kagera Sugar Mill- Tanzania
June 2004 – January 2005
Senior Instrument and Electrical Technician.
Joined a Sugar Rehabilitation team that rebuilt a Sugar Mill in Tanzania – Kagera Sugar Mill. The Mill had been decommissioned 8 years ago, with great effort and perseverance the Mill was commissioned again in October 2004.
The system consisted of 3 Allen Bradley PLC coupled via Servo running an Adroit Scada Package.
The Mill also covered a wide range of Instrumentation as it consisted of 2 new Alstrom 75 ton/hour boilers plus 2 x 2.5 MW generator sets.

Lucite International
June 1999 – June 2004
Instrument Technician:
Responsible for day to day running of the Perspex Factory, i.e. Standby, Planning Maintenance, Projects, Quality Control, Alarms and Safety, and Annual Shutdown.
Reporting to the Maintenance Manager and Engineer.

Ola Ice Cream & Acrylic Products
June 1997 – June 1999
Instrument / PLC Technician
P.L.C. Installation
Redraw all documentation to "As Build", general maintenance commission and document 75 KW microwave generator plant – Allan Bradley PLC and Citech Scada.

N.C.S.
October 1996 - May 1997
Instrument / PLC Technician
P.L.C. Installation
Level installations N.C.S Isipingo
Install and commission, load cell system to 10 x 40 ton vessels.

Intershore- Angola
July 1996 – August 1996
Instrument Inspection
Inspection of all instrumentation equipment for Intershore Platforms North N'Dola and South Sanha in the Gulf of Cabinda. Drawings, updates and commissioning. Quality control of class 1 division 1 intrinsically safe equipment on desalination, oil and gas separation systems.

CSE-Paper & Pulp-Indonesia
February 1996 - June 1996
Part of a team of 10 Instrument Tech's that were contracted to repair and improve a self contained
Factory in Asia. The section designated to myself; Evaporator Plant, Recovery and Multi-Fuel Boiler's
As a team we shared our knowledge and expertise to complete the project.

Kennedy Projects
December 1994 - January 1996
Sub contracted to and ran the following contracts and projects.
Service and standby contact to N.C.S. Resin Plant – Isipingo
Service contract to V.D.B.& J - Service & Standby Coates Brothers.
N.C.P. Installation. Paper Chem. Service & Standby
Pneumatic Installation at N.T.E. Mondi Eshwepe.

Mantec
July 1994 – November 1994
Contract position at Durban Fibres. Plant upgrade and new Orssi D.C.S. installation.

Universal Industries (Tiger Oats group)
June 1990 – June 1994
Instrument Technician with the following responsibilities.
Maintenance and upkeep of instruments that controlled a dry milling plant extracting starch and converting it to glucose; continuous configuration changes to D.C.S. including backing up of system; updating drawings; controlling and implementation of a P.L.C. installation that controlled a batching sequence. From August 1992, took full control of Instrument Department as immediate Supervisor was promoted to Production Manager.

V.D.B. & J (Unilever group)
December 1988 – May 1990
Instrument Mechanic with the following responsibilities:
Upkeep of instruments that controlled an edible oil refinery. This extended to fault-
finding that overlapped other engineering departments. Responsible for small projects from start to finish.

Lever Brothers (Unilever group)
June 1986 – December 1988
Instrument Mechanic with the following responsibilities:
Upkeep of instruments that controlled a soap manufacturing plant. This included stand-by as well as servicing V.D.B. & J to which I was designated.

Instromatics
June 1984 – June 1986
Instrument Mechanic with the following responsibilities:
Originally employed to work on "Wellies" project on Lever site, contracted to Kent Inst.
To calibrate and loop check each instrument over a 12 month period. Acted as
Service Technician to various companies such as S.A.B.; Toyota S.C.I.; Dunlop;
Universal Mills; Saicor & Tioxide, Illovo Sugar, Chrome Chemicals,

Gap Year
August 1983 – May 1984
Toured England, Ireland, Holland, Greece, Canada, United States, & parts of South Africa.

Tescor 1984
August 1982 – July 1983
Instrument Mechanic.
Duties included maintenance of hydro-electric power station, radio network and hydro monitoring system.

Escom
June 1979 – July 1982
Qualified as Instrument Mechanic from Escom, completing practical training at Rosherville and in service time at Kragbron Power Station.

Personal Details

Surname Langley
Name Peter
Date of Birth 1 May 1959
Age 46
Nationality South African
Marital Status Married
Children 3
Drivers Licence Code 08
Education Matriculated 1976
Apprenticeship Escom - Instrumentation

Languages English, Afrikaans, Xhosa (Fair)
Hobbies & Interests Wave Ski, Squash, Motor cycling, Fishing, Reading

Skills & Experience on the following Equipment

Allen Bradley Plc Installation & Fault Finding
Allen Bradley Plc Basic Programming Experience
Modicon Plc Installation & Fault Finding
Modicon Plc Basic Programming Experience
Mitsubishi Plc Installation & Programming
Hartmann & Braun 5 Years Experience with Various External Courses
Telemecaniqe Installation & Fault Finding
Honeywell T.D. 3000 Basic Experience
Kent K90 Training & Fault Finding Experience
Orssi D.C.S. Installation
Sentinel Scada System
Citec Scada System
Adroit Scada System
In Touch Scada System

Installation & Engineering Of The Following

Krohne Magflow Krohne Coriolis
Krohne Density E & H Magflow – E & H Mass Flow
E & H P.H. Meter E & H Temp. Tx.
E & H Ultrasonic Level E & H Press. Tx.
Kent Magflow Kent Press. Tx.
Kent Level Tx. Kent Temp. Tx
Kent Recorders Honeywell Controller
Honeywell Press. Tx. Honeywell Control Valve
Fisher Control Valve Fisher & Porter Magflow
Nellis Control Valve Tuchen Hagen Control Valve
Mason Neelan Control Valve Foxboro Pressure Tx.
Foxboro Temp. Tx. Foxboro Conductivity
Foxboro Level Tx. Rosemount Pressure Tx.
Rosemount Temp. Tx. Rosemount Magflow
Rosemount Density Fuji Controller
Fuji Pressure Tx Fuji Level Tx
Fuji Recorders Shimaden Controller
Shinco Controller Hengsler Counters
R.K.C. Controller Henglsler Batch Meters
Pneumatic Range: Festo – Bosch – Asco- Burcket – Joucomatic
Actuator Range: Norbro – Keystone – Amery – Natco

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 10923)

Go to Search Parameters...

Brief Description

SIVAKUMAR - QC Welding Inspector

Senior Drilling Engineer with more than 10 years experiences in Drilling, Measurement and Logging While Drilling. Outstanding background in field operations especially in drilling related job. International work experiences as Drilling Engineer, Directional Drilling Engineer, Rotary Steerable System

I am a chartered Engineer with ten years experience in the area of Instrumentation & Control. I have a 2(H)1 degree in instrumentation & Control from the University of Teesside, Middlesbrough, U.K. My experience spans trades, E+I design, senior/lead office roles in a global consultancy, site commiss

Use my skills and experience for your mission critical UNIX Infrastructure

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

I am having experience in Both static & rotating equipments

BE Chemical

I completed B.S. Chemical Engineering and I have 19 years working experience in Refineries and Gas plants in which 9 years worked as a Shift Supervisor. At present I am working with multinational workforce in Adnoc, Ruwais Refinery, Abu Dhabi, UAE.

Electrical technician:Plus 28 years of experience at drilling rigs. Electric & electronic maintenance at many kind of land rigs,with "IPS", "Ross Hill"& "GE" SCR's Drive systems,Varco TDS4 & TDS11SA top-drive, Kato generators,GE,Toshiba,Reliance DC motors,etc.English,Spanish Italian and Portuguese l

Capable of Loading and Off-loading Products from ships,barges,railcars,and 18 wheelers

A graduate of Petroleum Training Institute,Effurun,Nigeria with Diploma in Drilling Technicians Course and Higher Diploma in Petrochemical Technology in 1990 & 1994.Had varying experience in the upstream sector of the oil industry covering Drilling & Production operations.Worked in offshore & land

Engineer, Operation supervisor, SIMOPS team, Permit to Work Specialist.

Basic and detail design of electrical power generation, distribution & utilisation system and various system studies as short circuit & earth fault study, relay co-ordination study, load flow study, motor starting & voltage drop study etc primarily in manual in the beginning of career and later in E

Twenty-nine years experience in production operations, twenty-five years in an offshore oil and gas environment.

Project Manager/Engineer with 25 year experience in Oil and Gas Pipeline and related Stations. USA Professional Regestration Mechanical Engineer and Certifiec projectmangement Professional PMI USA. Oversea work prefered including remote sites. Currently with Saudi Aramco, Saudi Arabia.

SKILL SETS. Purchasing Department Director for a large International Organization, Contract Negotiation, Vendor Selection Process Management, Projects Management and Follow Up, Inventory Control Management, Strong Computer Skills

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

Senior Project Manager/Engineer (Offshore Projects)

I am interested in helping to improve the workplace morale of oil rig workers by conducting highly interactive and motivational workshops.

International Geophysicist with over 23 years experience in all facets of petroleum exploration, created and promoted prospects through use of seismic and well data. Expertise in use of Geoquest and LandMark geophysical software, experience in both 2D and 3D data acquisition and processing.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

20+ years in oil industry with extensive international exposure. Most part in drilling rigs management, but also human resource management, general management and more recently a training coordinator and Instructor for well engineers.

25 years exploration and production experience. Maintenance engineer.

Chartered offshore/structural engineer with seventeen years experience in design, analysis and reassessment of offshore and onshore structures in the in the North Sea and Middle East.

Exploration-Project Geologist, Petroleum Geologist, Well Site Geologist,

Highly motivated, results oriented with extensive and broad experience in the petroleum industry ranging from producing operations, reservoir and production engineering to management of a large technical staff.

Objective: Employment in petroleum production engineering, rig supervision, production operations supervision, or project management where seasoned experience, effective logistics, HSE practices, and practical technology can be brought together to attain corporate objectives.

Offering extraordinary experience in areas of purchasing, material coordination, project management, inventory control, and supervisory abilities. Seeking opportunities with a team organization in the natural resources extraction industry.

Seeking challenging and rewarding career that will utilize my 13 years' work experience in the Oil Services Industry and more than 20 years of Physics, Mathematics and Computer knowledge.

I am interested in a position in the EHS field. I have a degree from University of Findlay

A material analyst with a strong ability to plan and execute build schedules that support material requirements and maintain manageable inventory target levels. Develops and manages the inbound and outbound flow of materials and parts.

To obtain long-term employment with an organization that will allow me to utilize my sales, management, and organizational skills in order to achieve company objectives. An honest approach that has resulted in exceeding set goals in the petroleum industry for the past 22 years.

My experiences in mechanical works covered maintenance/construction of oil/gas processing plant and power plants. See attached Resume.

Over 14 Years of Strong Experience in Project Management, Estimation, Design & Procurement in Petroleum OIL,LUBES, Gas, and HVAC System.

Progressive and diversified experience in operation of gas pipeline transmission and oil field production. Proven track record in: Legal negotiations; Operations supervision; Budget management; System design; Project management; Conflict resolution.

Consulting Services Plant Construction & Modifications Reliability Inspections & Risk Assessment Maintenance Programs Pressure Equipment Design QA /QC Management Project Engineering & Management Procurement of Equipment Repairs and Alterations of Pressure Vessels and Storage Tanks.

I am a very experienced Seismic Crew Party Manager (23 years), currently seeking a Field Crew Management, QHSE, Mechanical Supervisor, or Consultancy position within the exploration industry. I am available for immediate relocation worldwide.

A drilling professional with over 20 years experience. Able to work effectively in both field and office drilling positions with the ability to achieve results. I can offer proven technical, planning, execution, leadership, decision making, risk management and communication skills.

Wide ranging petroleum engineer with successful record in reservoir development planning/management, 17 years: BHP, PGS, BP, Agip, Burlington, Phillips, Marathon, UT Austin(1982-85), NL Baroid, international experience in Nigeria, Kuwait, Egypt, Angola, Norway, Algeria, Syria, NorthSea

Cost Engineer with gas pipeline & oilfield production background also some power plant and mining background.

Environmental professional with a solid background and experience in environmental projects and permits under CERCLA, RCRA, OSHA, FERC, NESHAP, CAA, and CWA regulations. A highly motivated project manager and effective communicator.

Having completed my service at the age of 60 in Sept, 2000, I still want to live a busy life. Earn and live a better living exploiting 36 years of my experience in oil well drilling industry.

Looking for QHSE MANAGER position in international operations. 20 years experience in Oil&Gas. International work experience in Russia (West Siberia), Canada, Kazakhstan, Turkmenistan, Azerbaijan, Oman, Georgia, Cameroon. Bi-Lingual (English and Russian.

20+ years of Manufacturing experience, with 16 years with oil and gas operations. Supervised 4 plants, 8 departments and 350 men.

International Technical Sales/ Business Development

Chemical Engineer with 15 years of Safety, Environmental, & Transportation regulatory experience in oil, gas processing, chemical distribution, and trucking industries, including design, construction, operations and policy and procedure development compliant with regulatory requirements.

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering

Ingeniero de Petróleo en Operaciones de Producción. Pozos Productores y métodos de Levantamiento: Artificial por Gas y Bombeo, Flujo Natural y Cretácicos. Manejo de Estaciones de Flujo, (almacenamiento, tratamiento, separación, prueba de pozos, instrumentación y automatización).

Over 20 years experience, proven with successful results. As Country Manager, Director, and VP of international energy corporations, managed the operational strategies, financial functions, planning and reporting of large oil production and service organizations around the world. Fluent Russian.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out