Resume - December 2000 to 2003 Field technician in the field of power system protection. ...

Misco Jobs

Resume #63229

CONTACT INFORMATION:
View contact information...

PERSONAL DETAILS
2. Date of Birth 06-03-1981
3. Gender Male
4. Nationality PAKISTANI
5. Marital Status Single.
6. Religion Muslim

EDUCATIONAL QUALIFICATION
Name & Place of Institution Degree/Certificate Grade Distinction Duration
From To
Government college of technology, Multan. Diploma of Associate Engineer. A First Position 1997 2000
High School, Multan HSc A+ Second Position. 1995 1997

WORK EXPERIENCE
December 2000 to 2003 Field technician in the field of power system protection. Power Industry.
January 2003 to date. Field supervisor in the field of power system protection. Power Industry.

EXPERIENCE (In the Field Of Power System Protection.)
Generator Protections
Troubleshooting, routine testing for the protection schemes of Large and medium size generating units (2MW,5 MW, 18 MW, 300 MW)
Transformer Protections
Troubleshooting, routine testing for the protection schemes of Transformers (100MVA, 400MVA)
Switch-Yard Protections
Troubleshooting, routine testing for the protection schemes of 11kV, 33KV, 220 kV GIS (Gaseous Insulated Switchgear)
Working on Other Equipment
Operation and troubleshooting of UPS, DGs, motorized Valves, DC/AC control circuits, batteries chargers,

EXPERIENCE (In the Field Of Power System)
Generator
01- Emergency Diesel Generator (03 no) Make ANSALDO, FRANCE, 3.4 MW each, maintenance, troubleshooting, fault tracing, preventive maintenance, control circuit fault rectification. Understand its protection logic & excitation circuit. Take Part in Periodic Testing and load sharing with Grid. Ensure its availability in emergency condition. Maintenance of auxiliaries, preheating system and cooling system.
02- Emergency Diesel Generator (03 no) Make Cater-Pillar U.S.A, 1.4 MW each, its installation, commissioning and maintenance, Fault tracing and rectification in control circuit. These DG,s are controlled by plc controller Type Intelligen make U.S.A, Its Auxiliaries maintenance and conduction of periodic testing and load sharing with gird.

Transformers and power Network
Troubleshooting and maintenance of transformers and power net works of 11kv and 400v. Installation commissioning & testing. Its fault tracing in control circuit and rectification. Maintenance (preventive & corrective) and Testing of HV And LV Circuit breakers (make ABB, Merlin Gerin And G.E) Routine testing and Maintenance of protection schemes of 11KV & 400V Systems.
Power cables meggering & HI POT (Hi Voltage) testing.

* Can understand and read Electrical circuit drawings and logic diagrams.
* Preparation & maintaining of equipment history card and call up cards.
* Having experience of Electrical Testing equipments used for various testing purposes.
* Primary injection test set (ODEN-AT) USA Programma.
* Secondary injection test set (Sverker-750) USA Programma.
* Hi-Voltage Insulation Tester (Biddle USA).
* Micro-ohm meter (Biddle USA).
* CB analyzer TM 1600 (USA ) Programma
* Siemens relay test set CMC -256 pc operated make Switzerland.
* Calibration of measuring instruments (meters and transducers).

PROFESSIONAL OBJECTIVE.
To join a national / multinational company with an environment of consistent growth, that can utilize my experience in the field of Power System Protection.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7501 to 7550 of 10903)

Go to Search Parameters...

Brief Description

HSE/QA Advisor, Coordinator, Manager, Supervisor

December 2000 to 2003 Field technician in the field of power system protection. Power Industry.

B.E mechanical + piping in petrochemical /power plants + service of diesel engines + autoCAD

Inspect, diagnose, and locate mechanical difficulties on buses and trucks. Replace or repair faulty parts including wheel bearings, clutches, oil seals, shock absorbers, exhaust systems, steering mechanisms, & related parts and equipment. Fabricate and assemble parts and equipment for buses.

4 years experience working on land rigs, compotent in running all test, keep good records, good communication skills, finished valeditorian in a 7 week mud school with a 95 avg. I enjoy working. Overtime is always welcome. I truely believe that I would be a valuable asset.

Pipe Drafter/Design: AutoCAD - CADWorx - CADWorx Review - Isogen - Microsoft Office

4 yeras of pipefitting experiance as a journyman and helper

Multi skilled mechanic with experience both in the military and seismic industry.Excellent people skills and able to work well within a team or as a highly motivated individual

Oil Field

A proactive, result-oriented hands-on planner. A graduate of physics and also holds a post-graduate diploma in information and computer technology, with 12 years of post graduation experience and over 9 years of work experience in the oil and gas industry.

While in Matrix construction, I was involved in multi discipline projects that involve mechanical, Civil and instrumentation works. I have completed projects both on oil fields both offshore and onshore involving installation of various kinds of electrical switchgears, electrical systems, field inst

Hands on

Skills: Characterization, heat treatment, basic computer work. Education :Masters in Material Science & Engineering, Bachelors in Metallurgy. Two related projects and one metallurgy internship.

Experience in Catia, Design & Modelling of Welding Fixtures in BIW,Sheet metal,Kiln&Construction equipments with engineering concepts,6 months onsite experience in GERMANY, German Language skills,

Piping Designer

worked as a asst. wireline operator for 2 years in middle east oil field on offshore & onshore with schlumberger. hold high school qualification.

Proven SR Manager with Project Management Skills, SAP, ERP, eSolutions, SQL, and SOA. Have strong, SAP, ERP, eSolutions, Data Management, Process Management Maturity Assessment (PMMA) and SOA Compliance process experience. Lead start-ups, systems integrations/automations, rollouts, operational impro

Seeking a position in Maintenance Management as a Manager, Supervisor or Planner

I consider myself responsible, available, an esaygoing person at the sometime i serius in job and my personality and i like to be sociable

service engineer with six years experience

I hold a work permit for South Africa.I have eleven (11) years experience in multidisciplinary drawing offices with Zimbabwe Alloys, BOC GASES, Manhattan mining and TMP Process Plants. My skills are in designing and drawing (for heavy engineering equipment, petro-chemical plants, production plants,

Operations manager

Senior operator/panel operator

SADRA Shipyard at Neka-Iran-Caspian Sea Manager of Planning of the Projects Work Schedule for the Khazar Semi Submersible Drilling Unit,(Project value: USD 300 million)&Oil tanker 4800dwt&Tug boat1200&4400hp&Sincro lift(Capacity3000t)&Oil storage tanks Capacity9000&6000m3)&Cutter Suction Dredger

I would like to apply with your organization for the position of an Offshore Telecommunications Specialist where I can use my extensive background and significant experience to help you obtain your company's mission.

I used to run my won business for 12 years. CURRENT JOB: Cost Analyst for two years.

Although my background is in retail for the previous eleven years I am looking for a entry level position as a technician.

Engineering Professional with over four years experience in the oil and gas industry in reservoir development with expertise in the design, execution and evaluation of production projects

I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.

Background in OLGA modeling of subsea tiebacks and dry trees. Analyzed steady-state and transient multiphase flow fluids through wells and pipelines. Posses a good understanding of wax deposition and gas hydrates in flow lines.

OBJECTIVE I would like an opportunity with a world-class operation in which I could utilize my experience with advance technologies and modern production methods to achieve the profitability, quality and service goals of the organization.

I am a young, dynamic, confident result-oriented and self-motivated graduate of Chemical Engineering with two years of experience in the Oil and Gas industry.

engineering in dcs and plc system specialy YOKOGAWA CENYUM CS et CS3000 Prosafe PLC and APACS DCS of MOORE. GE MARK V and SUVIMAC II+

I believe that my work experience and positions of responsibility I have held in my previous jobs clearly illustrate the organizational skills and adaptability needed to work for your organization and demonstrates my ability to work in a business context.

Over 5 years experience in Steel Structure

Document controller with 6 years experience with EPC & well knowledge of EDMS and online documentation.

HND in Industrial Engineering Polytechnic Calabar 2008, Diploma in Applied Computer Studies. Baccalauréat De Brevet De Tehnicien in Electro-mechanical Maintenance

I'm mechanical engineer, I also have a mention in petroleum engineer, I did my practices in companies such as Repsol YPF, Pacifpetrol S.A, and I did visited Weatherford to get information for my thisis of degree.

Having Diploma(3 years) in Instrumentation Engineering with 8 years Exp. in Oil/Gas field (Offshore / Onshore) projects, commissioning, maintenance.

IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I am interested in working for your organization. Presently I am employed at Sultanate of Oman. My responsibilities are Vessel berth assignments for the Container Ships, Bulk Cargo Ships, Passenger Ships, Oil and LPG Tankers calling in Port. My responsibilities also include Plan, Manage and Monitor

Mechanical Engineer - Rotating Equipment Engineer

A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.

Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.

i am a qualified Chemical and petroleum engineer with a masters degree, with upto 2 years experience in the exploration and production sector of the oil and gas field both in the field and design while using various softwares.

Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.

Qualifications: Teesside University: 1st Year HNC Instruments, Cleveland College: BTEC National Cert Engineering, BTEC First Cert Engineering.

Strong engineering management and design background with a broad range of skills including: construction management, process plant design, subcontractors management, mechanical equipment specifications, project controls, material handling design including barge loading and unloading, AutoCAD

Geologist / Geotechnical engineer

First Prev [ 151 ] 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out