Resume - MAINTENNCE SUPERVISOR /ENGINEER/ CORDINATOR/ MANAGER

Misco Jobs

Resume #63547

CONTACT INFORMATION:
View contact information...

Date and place of birth 16 September 1975 AIN ZAATOUT - BISKRA
Familiar situation Married + 1boy.
Nationality Algerian

EDUCATION AND DIPLOMA
Primary school: Sep-1981 / June - 1987
* BEP*
Medium school: Sep-1987 / June - 1990
*BEF*
Height school: Sep- 1990 / June- 1993
BAC *Baccalaureate on technical mathematics*
University of BOUMERDES IN engineering faculty
2000 -Industrial Maintenance engineer the first graduate on the university with very good mention

EXPERIENCE

*EXPRO GULF GROUP LTD

MAINTENANCE SUPERVISOR

* Plan and co-ordinate onshore activities to meet operational, project and engineering delivery schedules.
* Ensuring all equipment is completed in conformance with operational load out lists or production plans.
* Monitoring and logging base personnel performance to define training needs and potential improvements and efficiencies.
* Ensuring all products are kept in a fully operational status in accordance with expro maintenance QA procedures.
* Ensuring that all personnel when working in base to ensure compliance with quality procedures and base and workshop rules and regulations.
* Always in close liaison with operation s support management regarding all base activities.
* Ensuring all base operation staff are briefed prior to starting an operation and de-briefed if any operational problems are incurred.
* Ensuring all activities are conducted in a safe and reasonable manner
* Reviewing all post job operational / maintenance reports and implement any suitable recommendations.
* Responsible for insuring all job cards issued to work have all necessary drawing and procedures prior to issuing.
* Performance of periodic inspections of well testing & wire line equipment integrity testing
* Certification and witness test of well test and wire line equipment
* Maintenance of Pumps (Haskel, txt, sandpiper, Inerpac, …etc)and calibration of dead w
* On site faults finding and resolutions
* Development of diagnostician and maintenance procedures
* Assessments and optimisation of spare stocks to minimise down time
* Supervision of periodic maintenance requirements and safety.
* Supervision of EXPRO GROUP well test and wire line teams and material movements.
* Talk box talk and safety meeting animation and risk assessment if is it necessary.

3*WOOD GROUP PRESSURE CONTROL \ GROUPEMENT SH/ANADARKO

SERVICE ENGINEER
Developed a Xmas tree & wellhead maintenance management database for Berkine fields wells.
* Performance of periodic inspections of wellheads and integrity testing
* On site faults finding and resolutions
* Development of diagnostician and maintenance procedures
* Assessments and optimisation of spare stocks to minimise down time
* Supervision of periodic maintenance requirements
* Supervision of any repairs required.
-Maintenance and repair of manual and actuated (HYDRAULIC AND PNEUMATIC) Xmas trees -and well head type CAMERON. FMC. WOOD GROUP. VETCO GRAY.BAKER
-Maintain all Groupement owned BPV`s TTP`s running /t pulling tools and other related equipment
-Install and test and maintenance of Xmas tree and wellhead.
-Run/Pull Back Pressure valve and tree test plugs (BPV`s/TTP`s)
* Maintenance of well panels control systems.
2*NABOURS DRILLING SERVICE LTD 6 MOINTHS

RIG ASSISTANT CHIEF MECHANIC, RIG 810
Completion of periodic inspection and maintenance needs, faults finding and resolution on equipment's/ generators/ draw work / rotator table / mud pumps/pumps/BOP/Compressors wheel loaders forklifts /electric motors, etc

*CATERPILLAR <BERGERAT MONNOYEUR>

MAINTENANCE ENGINEER
* Technical consultant
* Assessment and optimisation of spare part stocks to minimise downtime

WORKSHOP SUPERVISOR
Supervision of any repairs required to caterpillar material<electric, hydraulic and mechanic systems for heavy equipment, Generators-Forklifts -Diesel and gas Engines 3306- 3406-3508- 3512- 3408-D389-D399-D379, HYSTER forklifts Perkins engines.

INFORMATIC AND COMPUTER

Use very well Computer including the practice of deferent software as windows and Dos too.
-Word/ Excel /Power point /Access (developed logistics programmes)/Win project/Binder/outlook/
Basic /Fortran /Pascal /acrobat /AutoCAD /Internet explorer

IN FIELD TRAINING
*Dangerous goods regulation lowstof folk training England
*Maintenance supervision in expro north sea base great Yarmouth England
*Hydrocarbon containments
*SAP
*Risk assessment and work permit.
*Well Control panel operations and maintenance.
*Well production and testing
*Defensive driving V.A.S.T driver's passport (on road and off road driving)
*First aid
*Crane drivers and slingers
*Manual handling
LANGUAGE

Able to communicate (written & verbally) in Arabic, French and English.

Job seeking: Maintenance Manager, Engineer or Supervisor – Mechanical engineer. ……Etc.
Have a good understanding of any technology and fast adaptation to it.

- Driving Licence
-Good presentation
-Ability to work under pressure whilst achieving maximum productivity, safety and cost effectiveness.
-Sound leader ship and man management skills
-Organisation and communication skills.
-Sound knowledge of maintenance procedures and practices.
-Flexibility.
-Aptitude for multi skill engineering.
-Free has proposition
-Residence system or rotation is acceptable.

.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 10014)

Go to Search Parameters...

Brief Description

Process Instrument & Control and Analytical Insrument Specialist

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

Innovative and motivated Electrical and Electronics Engineer with 15 years lead experience in Commissioning, Operations of Combined Cycle Gas Power Plants and Thermal Power Plants and Maintenance of Combined Cycle Gas Power Plants and Thermal Power Plants Control & Instrumentation and Electrical S

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

M.sc in Applied Geology with M. Tech In Petroleum Exploration and working with one of the most successful exploration company in India.

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Contract Oil & Gas Technical Writer Twenty years of progressive responsibilities in oil and gas industry.

Mapping, exploration, aerial primary data acquisition.

Police Officer ,Hostage negotiator, Field training officer, Investigation officer,MS Office,Communication skills

Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.

Can Handle any related Jobs such as Work Controller, Procurement Officer and Administration Assistant or Staff. More details mentioned on my Resume Body.

Management of geological work at rig, Detailed sample analysis including accurate porosity and permeability estimation; Petro physical QC; Geological Operational QC; Liaising with client Geologist, reporting and striplog submission, representing oil company at the Wellsite; Work in the W

9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.

I am hardworking, trustworthy and responsible. I can work under pressure with minimum supervision. I like to take challenges which has a growing and rewarding concepts; love to share and learn new ideas in my working environment.

I am an MBA student at College of Business School at Auburn University. I hold chemical engineering degree from India¡¦s Top Engineering School. I have strong reasoning and analytical skills. I have 3 years experience in Corporate Marketing with British Petroleum.

B.Sc (physics-instrumentation), ACAD and Microstation expert, Designing 12 years experience

I have endeavor to have broad base safety experience.

Responsible for managing the Project Electronic Document Management System (EDMS) which processes and stores all technical documentation including selected contractual and other correspondence.

Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

Experienced Consultant Wellsite Geologist with 10 years of International Experience

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

I have over 13 years in oil field and work in logistics for most of that 13 years.

project leader or senior engineer in oil , gas and petrochemical industries for projects and commissioning with middle ease, european and indian exposure for more than 13 years in production, operation, precommissioning and commissioning with smooth run and trouble shooting and DCS controls.

Graduate, PGDCA., Shorthand, typing, 16 yeas experience, 6 six in Middle East, Excellent Finance. administration, conract background

xsteel detailer/checker

I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.

I possess a BS in petroleum engineering, and ten years of work experience with Core Laboratories as Special Core Analyst (SCAL), duties including: performing laboratory analyses of petrophysical and fluid flow properties, coordinating projects, data evaluating, and report generation.

MAINTENNCE SUPERVISOR /ENGINEER/ CORDINATOR/ MANAGER

M.E. (Welding Engineering),

Production optimisation,workover, well test,drilling

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

BE (Electrical) from VJTI – Bombay with rich experience in Contracts & Procurement, MM logistics, EPC Project Management, Sales tender, Profit & Cost centre Operations in career spanning 25 years in India and Overseas for Oil and Gas Process, Petro Chemical, Metal, Power, Civil MEI Infrastructure BU

Contribution Twenty Two Years comprehensive professional experience encompassing the succeeding different area of responsibility.

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out