Resume - A highly skilled Petroleum Engineer with over 20 years domestic and internationa...

Misco Jobs

Resume #63598

CONTACT INFORMATION:
View contact information...

Education and training:

● Graduated from the Oil & Gas University of Ploiesti-ROMANIA at 1986, Bsc. Petroleum Engineering
● Graduated special courses for laboratory testing for cementing and fracturing operations, 1986, Petros Ploiesti, -cementing engineer, basic level
●Special training for the problematic of cementing job to oil, gas and water wells from Petros Ploiesti, a Romanian national service company in 1986, 1992, 1997, 2002-cementing engineer high level
●Special courses BOP and fire intervention, of Romanian National Petroleum Training Center, CIMPINA-ROMANIA at 1986, 1992, 2000.

Personal skills and competences:
●A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company, and good knowledge of the problematic to cement oil, gas and water wells and conversant with all most cementing equipment.
● The managing experience
●Experience in cementing techniques.
●Experience in cementing operation of HPHT wells, and deepwater wells or cementing operation for low positive temperature wells
●Experience to redress and RIH cementing tools.
● Experience to prepare the work procedure for cementing operation
● Good experience to prepare the cementing programmes for routine development/work or special conditions
● Experience to prepare job recommendations based on the available job criteria and knowledge of discipline and past performance
● Experience to carry out a cementing operation with cementing pump unit
● Experience to perform routine maintenance of the cementing equipment
● Knowledge of laboratory testing equipment and procedures for cement, mud and concrete parameters
●Experience with Gravel Packing and Sand Control Operations.
● Knowledge of decimal book
●Good working knowledge in English, spoken, read and written
● Good interpersonal skills to mix with people from a wide range of nationalities, cultures and educational backgrounds
●Some experience with job simulation cementing software.
● Experience to work in desert conditions
● Good knowledge of Microsoft Word/Excel/PowerPoint and AutoCAD,
● Languages: English-good level
Arabic -protocol level
Russian-basic level; Romanian-mother language
●Driving licenses, from 1992

Work experience:

Present-March 2006 Cementing Field specialist
Dowell Schlumberger-Service Well Company in Libya

Working for Dowell Schlumberger- Well Service Company in Libya, in position of Consultant Cementing Supervisor. During this project my main duties were:
* Executes successful jobs according to design and client specifications.
* Ensure that people, equipment and materials arrive on location in a timely manner as required by the client.
* Maintains and repairs product line equipment as needed.
* Ensure that all phases of treatment are carried out in a safe, efficient and professional manner.
* Assist Field Service Manager in preparing performance evaluations for assigned personnel.
* Trains and develops assigned employees to operate in a safe, efficient and professional manner within Company policy and procedure.
* Initiates disciplinary action when necessary, on location with crew or assigned personnel, within Field Service Manager Guidelines.
* Prepares product line report for Field Service Manager and clients.
* Promotes Company approved safety and operational policies and insures that Both Company and client safety objectives are achieved.
* Applies technical and operational knowledge by completing training modules.

2003- March 2006/ 1997 –2000 Cementing supervisor
S.N.C. LAVALIN INTERNATIONAL INC.

Working for S.N.C. LAVALIN INTERNATIONAL INC. Canadian Company acting like drilling and pipeline contractor in Libya, in position of cementing Supervisor, on Great Man-Made River Project. These projects include many water fields like TAZERBO, DJAGBUB, SARIR and pipeline connection systems. During this project my main duties were:
* Performed the cementing job for wells design including casing diameters between 4 ½¨ and 32 ¨ and depth to 1600 m and laboratory analyses for cementing and gravel pack operations.
* Carry out a cementing operations with FRACMASTER PUMP UNIT
* Managed cementing department activity with main responsibilities to:
-coordinated and supervised the work of the cementing team
-assisted in managing/training junior engineers, field engineers/technicians
- ensured safe working practices and conditions for successful operations
-prepared and accomplished the cementing programmes for routine development/work over operations, according to the procedures, during all drilling activities
-prepared the cementing programs for casing according well design and caliper log information
- prepared job recommendations based on the available job criteria and knowledge of discipline and past performance
--prepared the gravel packing programs for screen filters according drilling procedure, well design and caliper log information
-design, install and maintain a range of pumping according cementing programs
-evaluated the pumping process
- assured the routine maintenance on the cementing equipment
- ensured proper communication between cementing crew and rig crew during operations
- prepared post job reports
-prepared the mix fluid for cementing job with cement additives
-prepared the adequate program for loss of circulation of the wells
* the testing laboratory operations of the cement, hard cement (concrete), mud and gravel were done and coordinated in our laboratory from Sarir according owner request, ASTM and API standard and include,
-testing parameters of cement and cement slurry as:
- thickening time,
-slurry viscosity and rheological properties
- fluid loss,
-slurry density,
-stability of cement slurry
-testing parameters of hard set cement as compressive strength,

-testing parameters of gravel were done according ASTM, BSI or API standard according specifically manufactured procedure and include:
-sieve analysis for granulometrics test
-angularity of gravel
-organic impurity test and chemical analysis
The work also involves estimating and formulating requirements cement and chemicals required for project. The cementing job was performed with FRACMASTER PUMP UNIT; a Canadian brand pump unit similar with Halliburton or Schlumberger equipment and gravel pack operations were done with AQUA FRAC equipment.

2003-2001 / 1997 – 1986 Cementing engineer
PETROS S.A. PLOIESTI

Working for PETROS S.A. PLOIESTI, a Romanian Company, main service Company in special operations for drilling and production well of oil and gas industry.
Main responsibilities of my position were:
* Supervised cementing and packing operations, hydraulic fracturing and kill of well blow out, participated at 3 times to stop blow out from gas wells. Cementing job was performed for wells at 4500 m and casing diameters between 4 ½¨ to 32 ¨ with normal gradient of temperature or high.
* Coordinated and supervised the work of the cementing team and lead directly special operations at the oil and gas drilling wells, production and hydro geological drilling wells, as:
- Cementing - squeeze cementing,
- Cementing casing,
- Liner casing,
-multistage with DV
-cementing plug
-hydraulic fracturing or acidization for stimulation of the wells with acid or sand laden fluid pumped under pressure to improve production levels
- Pressure test to packers engaged
-prepare the cementing mix fluid with cementing additives
-testing rheological parameters of cement slurry as:
- thickening time,
-viscosity
- fluid loss,
-slurry density,
-stability of cement slurry
- testing parameters of hard cement as compressive strength,
-preparation of procedures/technologies for squeeze cementing of loss zone
-- ensure proper communication between cementing crew and rig crew during operations
- ensure safe working practices and conditions for successful operations
-prepare and accomplish the cementing programmes, according to the procedures, during all drilling activities
-prepare the cementing programs for casing according well design and caliper log information
- prepared job recommendations based on the available job criteria and knowledge of discipline and past performance
-designing, installing and maintaining a range of pumping according cementing programs
- assure the routine maintenance on the cementing equipment
-record cementing parameters in drilling report and prepare a report about cementing operations to drilling department and management department
-prepare the adequate program for loss of circulation, in special for water wells
-sand control operations for perforations
* Carry out a cementing operations with AC 500, ACF700/ACF1050 PUMP UNIT
* Prepared cement admixture with:
-bentonite, gilsonite, fly ash materials used for lower weight of cement slurry
- barite for increase density (heavier weight)
-silica (sand or flour) and weighting agents for wells with high temperature.
The cementing job was performed with AC 500 and ACF700/ACF1050 PUMP UNIT, Romanian brand pump unit equipment and gravel pack operations were done with BLENDER equipment for fracturing operations

Social skills and competences

- Dedicated with positive attitude
- Outstanding ability to communicate with various types of people
-Ambitious and hard working with the ability to work long hours
-Good interpersonal skills to mix with people from a wide range of nationalities, cultures and educational background
- Resourceful, self-motivated, and able to work well independently or as a team player
Organizational skills and competences
-managing the cementing department I had currently crew between 20 to 50 peoples depend of project
-the stress resistant is result of 20 years on drilling activity
-I am calm, rational and a good communicator for this job
- planning is the key to this job
REFERENCES: Available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 9906)

Go to Search Parameters...

Brief Description

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

Project Management & Supervision, System Analysis, Design & Development Work, Device Wiring & Installation, Commissioning, Operation & Maintenance, Planning, Schedule & Decision Making

Had 27 years of work experience on Commissioning, Start-up and Operation of numerous Oil/Gas Production facilities, Petro-chemical, Chemical and Power Plants. Currently working as Operation Support/Pre-Start up Safety Coordinator in Oil/Gas/Sulphur Plant plus almost 7 years of Supervisory position

Experienced with trouble shooting all aspects ships electrical installation and automation, DP Experience

Managing Oil Field Operation and maintain high safety and low budget operation. FPSO Project Engineering.

An experienced and professionally qualified HSE Manager/Safety Engineer with proven leadership skills. Experience has been gained in both challenging and demanding working environments. Oil and Gas, Petro Chemical and the Nuclear/Power industries, also Engineering /Construction including Demolitio

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

Summery Of work Experience:-

Versatile mechanical engineer within the oil and gas industry

painting and insulation supervisor - oil and gas industries

35+ years of multi-disiplined engineering practice, 24 years of direct supervisory experience, in power, petroleum & process industries

Senior Petroleum Engineer, 20 years experience in petroleum engineering. Areas of interest: Well test analysis. Production optimization & forecast. Productions operations Work over & completion design

Experienced Completing and Producing Petroleum Engineer

An astute techno-commercial professional having 13+ years (of 15+ years) diversified experience in grid connected wind energy sector.

Free! Top-notch Instrumentation Technologist and Process control Team Leader of an US based MNC for the Central Engineering Division in Mumbai to meet the requirement of Asia Pacific and Europe who are pioneer in the manufacture of specialty chemicals with over 18 years of notable experience in the field

High level technical knowledge and understanding of execution methodology on engineering aspect. About 5 years in a QA/QC jobs engage in Power Plant Construction under the management of Japanese Firm. Had a background on Piping/Mechanical Designs using Autocad. Advance computer literacy.

As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability

Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,

Highly qualified, and experienced Fully conversant with all aspects of evaluation and testing of drilling mud. Expertise in testing of all the mud parameters

I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.

Experienced for over 24 years in project & multi-disciplinary engineering management, planning, civil/ structural engineering, and computer software applications. Directly involved for more than 21 years in OIL & GAS offshore and onshore industry.

Control & instrumentation

A HIGHLY ADAPTABLE CIVIL WORKS AND CONSTRUCTION SUPERVISOR/INSPECTOR

I have accumulated thirty years experience in the oil & gas/heavy engineering/construction industry.

AWS- Certified Welding Inspector

Four year degree in Chemical Engineering from IIT, Roorkee and having 20 years of experinece mainly 17 years in Natural gas industry and five year in pipeline project development and three years in chemical industry. Working from last Sixteen years with Gas Authorityof India Limited under MoP&NG

20 Year experience in Oil & Gast Sector Project Management , Operation & Maintenence of Cross country petroleum/crude oil Pipeline

Degree in Mechanical Engineering & PG Dip. in Materials Management. Fully Conversant with the Materials and Maintenance modules of SAP system. Knowledge in materials standardization & cataloguing of upstream as well as downstream companies in Oil & Gas industries.

KEY COMPETENCIES

Extensive experience in commissioning, operation, maintenance and supervision of water treating, steam generation, power generation, and power distribution equipment and systems, and in the planning, design, and project development of electrical equipment in the power, oil and gas industries.

Highly aspiring to Excel in my Professional Career and seeking a Core Organization, which can provide a Motivational ambiance and Exposure to Creative Innovations in Advanced Technologies, where one can grow and benefit the Society Globally.

Expert knowledge in the integration of core and log data to help geologists, geophysicists and engineers be more productive.

I am having 21 years experience (10 years in supervisory cadre)in oil &Gas / Petro chemical / LPG Plant operation and maintenance . Experienced in the installation, maintenance and troubleshooting of a wide range of Power Generation and high voltage transmission equipment, distribution systems

Ram Babu Singh

I have 27 years in Petroleos de Venezuela (PDVSA) specializing in the area of Geodesic and Topography, developing activities related to several petroleum’s operational processes.

Design and Construction supervision experience in connection with Structural Steel Works and Steel Fabrication works using Code of Standard Practice of the American Institute of Steel Construction (AISC, ASTM), Mechanical Piping and Material Take-off required for Petrochemical Plant, Oil Refinery, P

Senior geophysicist, SMT and geographix work station expert,offshore data experience throughout world

I am a Chemistry post graduate having 17 years of laboratory experience from petrochemical and hydrocarbon industries.

Gradute chemical engineer

Oil / Gas / Petrochemical Project-Commissioning Manager. Registered Professional Chemical Engineer in UK / Europe.

Solid knowledge of: -drilling equipment and spares, inventory management and cost control

Familiar with : CPM (Critical Path Method), WBS (Work Breakdown Structure), Developing Budgets, Cost Tracking and Cost Control against budgeted data, Managing contract execution, Risk management and change control procedures, Work well independently or as a team member, good communication skills

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

A Bachelor's degree holder in Chemical engg, have about 20+ years of Hydro carbon Industries experience both in Oil & Gas refineries and Oil production facilities. Having very good knowledge and trained in Fire fighting techniques and Plant safety equipments.

Industrial, B2B and Retail sales & marketing of ‘Fuels, Lubricants and other Petroleum Products’

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out