Resume - Mechanical Maintenance professional with exceptional interpersonal and communica...

Misco Jobs

Resume #6365

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION
Date of Birth: 04 January 1976.
Marital Status: Unmarried
Nationality: Indian.
Current Salary: 3.8 lacs INR approx PA

REFERENCES: Upon Request.

SKILL SET

Highly energetic and skilled Mechanical Maintenance professional with exceptional interpersonal and communication skills and an extensive background in following broad based competencies:
Static Equipments Inspection/Repair Rotary equipments Maintenance
Gas Turbine O/H ATR Material & Manpower Planning
SAP 4.6C PM & MM Module Cost & Energy Conservation Oriented
Concepts of 5-S, RCA System
British Safety Council Certification for the Plant

EXPERIENCE

M/S CHAMBAL FERTILIZERS & CHEMICALS LTD - Gadepan, Kota (Raj)
Senior Engineer: Mechanical Maintenance July 2003 –PRESENT
Chambal Fertilizers and Chemicals Limited, K.K. Birla flagship company with a turnover of around 4500 crores is one of the finest and high-tech Gas/Naphtha based fertilizer company in India handling the need of Urea in the north-west sector of India to the large extent.
 Maintenance of Ammonia-2 plant (Based on Kellogg's Technology), which also comprises one Auxiliary Boiler (with capacity 156 Tons/Hr Superheated Steam at 115 kg/cm2, 510 Deg C), Instrument air Plant & Cooling Towers (capacity: 25500 CUM/Hr).
 Material & Manpower planning of ATR for Ammonia Plant
 Study, BOQ preparation & execution for various Modification schemes for the plant.
 Overhauling of various high speed & high pressure Pumps, Turbines, Compressors, gearboxes & Fans etc.
 Exposure in material selection, Fabrication, Erection and commissioning of high pressure & high temperature process piping and their components being used in Fertilizer plants.
 Familiarity with engineering standards applicable to process industries.
 Maintenance of each type of Valves, Dampers for Fans, Cooling tower system, Chlorination Section & Acid handling section.
 NAPHTHA/NG FIRED HEATERS (Primary & Secondary Reformer)
* Internals inspection of Primary reformer, it includes catalyst tube health checking, Burner gun maintenance & critical dimensions measurement during ATR.
* ID & FD fan and their drivers (Turbines) maintenance/overhauling.
* Secondary reformer Gun cleaning & replacement of Gun.
* Repair of Liner & ferrules.
 AUXILLARY AND REGENERATOR BOILER
* Boiler hydro testing for IBR certification.
* Calibration & Overhauling of Boiler PSV's
* Leak repair in tubes.
 HEAT EXCHANGERS
* Cleaning & Hydro testing of Heat exchangers during ATR.
* Overhauling of PHE (343 plates, supplied by HISAKA, Japan)
* Re-tubing of Naphtha effluent cooler (1006 Tubes, 6.0m long)
 TOWERS & VESSELS
* CO2 reactor internal Inspection & repair of distribution tray, Demister & other internals.
* Internals Inspection of various High pressure & High temp towers.

M/S TATA CHEMICALS LIMITED FERTILIZER DIV.- Babrala, UP
Engineer: Mechanical Maintenance Jan1999 – June2003
Worked in Urea plant and offsites & Utilities section during the stay in company. Major work exposures are listed below:
 Major overhauling of Gas Turbine (Supplied by THOMMASSEN GE) of 20 MW capacities employed to satisfy plant power requirement. It includes Rotor removal, Blades inspection of turbine & compressor, liner checking, Load gearbox overhauling, Auxiliary Gear box o/h etc.
 General Maintenance of Gas Turbines (2 units) of 20 MW each, Hot gas path & Combustion path inspection, Maintenance of Heat Recovery Units (2 units) of 98TPH Superheated steam, Auxiliary Boiler (110 TPH) and various types of valves for different services viz. Ammonia, KS Steam, HS Steam, LS Steam, Acid, Alkali etc.
 Complete Overhauling of Boiler feed water pump of KSB make and having 11-stages.
 Overhauling of CO2 compressor, which is a four stage centrifugal compressor (160 kg/cm2) supplied by BHEL.
 AMMONIA REACTOR FEED PUMPS (Reciprocating Pump with Diff. Pr: 220 kg/cm2)
* Change Seal Oil flushing system to Condensate Flushing system in 2 nos. Ammonia Feed Pump supplied by URACA (Germany) model no KD-827. Replacement of traditional Valve Block to Modified Valve block, which use profile rings for sealing Tandem valves & block cover in place of o-rings.
* Completely Overhauled Power End & Fluid End of Ammonia Feed Pumps (High Pressure Pump (240 kg/cm2), required for reactor feeding. It includes replacements of Crankshaft, Main bearing, Small end Bush Bearings, Crossheads & Crosshead Bushings.
* Completely Overhauled Torque Converter (Model RL-211) supplied by M/s Voith (Germany).
* Made & Implemented the Overhauling/Schedule checking for Torque converter, Main Pump & Gear Box.
 CARBAMATE TRANSFER PUMPS:
* Overhauling of high RPM pumps (Model: 3512, Two Stage, (16216 RPM)) employed for carbamate transfer services supplied by SUNDSTRAND FLUID HANDLING (GERMANY).
* Overhauled the Seal flush pumps of Carbamate pumps.
 UREA REACTOR (OPERATING PR:160 KG/CM2)
* Annual Inspection of Reactor for checking the weld condition of liner with the Shell.
* Complete welding of both the reactors was carried out.
* Involved with the M/s FBM Hudson, Italy during Inspection of reactor. As per suggestion of M/s FBM Hudson full penetration welding of both the reactor trays supports were carried out.
 UREA STRIPPER: (OPERATING PRESSURE: 145 KG/CM2)
* Carried out the Stripper Reversal activity for two nos. of Urea Strippers.
* Annual Inspection of Urea Stripper. It includes the internals removal, Inspection, Repair & Box up.
 Maintenance of Steam Turbines and Reciprocating Compressors.
 Maintenance of High, Medium and Low-pressure Reciprocating, Centrifugal pumps, barrel type vertical pumps, Screw Compressors and FD Fans.
 Maintenance experience with High, Medium and Low Pressure vessels such as Reactors, Strippers, Heat Exchangers, Condensers, Tanks and etc.
 Vendor's development for supply of quality spares parts at reasonable prices.
 Indianization of spares as much as possibly but not at the cost of quality.
 Executed many improvement initiatives in Urea plant as British Safety Council Award, 5-S activities, TBEM (Tata Business Excellence Model based on Prestigious Malcom Balridge Award) etc.
 Implemented the RCA (Root Cause Analysis System) model in the department. It is based on famous 8-D model for identifying the root cause.
 Planning, Scheduling and Execution of preventive maintenance, predictive maintenance, breakdown maintenance and shutdown activities.
 Familiarity with Engineering Codes and Standards.
 Preparation of Annual budget for Annual Maintenance Contract, Spares and Consumables.

EDUCATIONIONAL QULAIFICATIONS

GRADUATION: B.Tech in Mechanical Engineering with distinction from University of Lucknow (College name: Institute of Engineering & Technology, Lucknow, State Govt. college) in 1998 with 78.0 %.
12th STANDARD: From UP board & secured 73% marks
10th STANDARD: From UP board & secured 72% marks

COMPUTER PROFICIENCY

* Working knowledge of SAP-R/3 as this is the package used in our organization. Presently we are extensively using Plant Maintenance (PM) module, Materials Management (MM) module of SAP in Planning of jobs,daily recording of Data & report generation.
* Well versed in using Windows-XP, office-XP.

SEMINAR ATTENDED

* Tribology (presented by NPC persons)
* Plant maintenance module of SAP- R/3
* Specialized technical training on Pump & Compressors in BPCL, Naini Allahabad.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7701 to 7750 of 10816)

Go to Search Parameters...

Brief Description

Please find enclosed a current copy of my cv. I am extremely well qualified in Oil/Gas HSE and am well suited for this environment.

Mechanical Maintenance professional with exceptional interpersonal and communication skills and an extensive background in following broad based competencies: Static/Rotary Equipments Inspection/Repair, Gas Turbine O/H,ATR Material & Manpower Planning, SAP 4.6C PM & MM Module

male, 28 age years old. I have worked for Schlumbeger as Coiled tubing Field Engineer from 2000-2003. Now I work in Malaysia as a Coiled tubing consultant for Schlumberger.

Award-winning, highly accomplished and motivated professional with over all four years of proven track record of rapport-building, resourceful problem-solving, communication skills, also with substantial experience in Techno-managerial capacity.

4 year experienced Structural/ Operations/ Drilling Engineer. Working for a well known oil giant in Houston TX. Speak Fluent Arabic and English. Looking for a job in the Middle East.

Developed test procedures and tested Power Plant Training Simulation/waste water treatment/Marine process simulation software. Developed flow and high-performance computing. Software packages like simulation, performance and optimization Package for Power Plant.

I am a process engineer with over 4 years of experience to offer you. My recent experience was an operation engineer in a petroleum company,

10+ years experience in industrial and petrochemical, installations both onshore and offshore. Commissioning, construction, maintenance and inspection. Refineries, Gas Terminals, Offshore Platforms, F.P.S.O’s, F.P.U’s Pharmaceutical, Petrochemical, Power Stations, Gas Compressors and Generators.

Chemist with oil/petroleum experience.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

COMPUTER KNOWLEDGE: Done specialized CAD R 14, 2000, 3D modeling Auto Cad 2002 and 3D modeling Micro station 95, micro station J Courses with special reference to Drawings / Designs MS OFFICE msword,excel,power point

instrument & Control engineer exp. in marketing of Temperature measuring inst. since 2000

Objective: To utilize my computing and interpersonal skills in the Computer information industry.

Geological Technician Denver, CO

I am BE Chemical Engg from India, passed in 2000,was a gold medallist. I have experience from production to process engg and from administrative to marketing. I have worked in almost all areas of my stream to get the awareness of each part.

I hold a master of science degree in geophysics with geology background. I only practiced eight(8)months as seismic data acquisition geophysicist since after my graduation. At present I am a practising drilling fluids engineer.

I am a graduating chemical engineering student from the University of Waterloo. I have completed 6 work terms, 5 that were in the oil industry. I have had an excellent experience in each of these positions and have gained a wide range of skills that can be applied in the oil/petrochemical industry.

-welders/welding procedures qualification -piping erection -static equipment installation -material control

- Four years of experience as Petroleum Technologist in Schlumberger Oilfield Services. - I am familiar with the Technical aspects and Physics of hi tech logging tools. - I have undergone specialized training on Open hole tools and hold an excellent safety record

In spite of having a degree in Mechanical Engineering I’m willing to work on an entry-level categories in drilling industry. Looking at my skills and abilities, I assure my employer that they will be satisfied on every result of all my efforts.

To provide information in respect of the background.

Reservoir Engineer, with 10 years experience both in oil and gas fields. Reservoir simulation studies. Assets acquisitions. Waterflooding

Inspection Specialist with more than 10 years in the Oil, Gas, Petro-Chemical and Power Industries, who utilizes strong organizational skills to identify and resolve technical issue and leadership abilities to maximize team talent and effectiveness.

Objective: To obtain a position where my experience, analytical skills and understanding of computers, networking, security and software can be used to solve engineering challenges

Job in QC analyst

Process/Instrument Technician with 10 years experience in Fault finding, construction, commissioning of various types of pneumatic and electronic instrumentation used within the oil and Gas Industry.

To seek further challenges as an engineer or related position where a diverse background and proven technical expertise used and advanced.

A highly dedicated Turbine Supervisor whom is very thorough and reliable. Over 10 years experience with rotating equipment including gas turbines and compressors, steam turbines, and high pressure pumps. Currently the Turbine Installation Supervisor at the New Gas Fired Esperance Power Station.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

ASNT Level III, AWS SCWI, API 510, 570

Over thirty years of combined engineering and construction management experience involving supervision, design, contracting and construction, pre-award and post-award contract administration, change order and claim management, CPM Pert scheduling, cost, estimating, procurement and logistics of large

Multilingual GIS (Geogpaphic Informational Systems) professional, cartographer

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Welding Engineering

Experience Cementing supervisor with most training abroad

Graduate in Chemical Engineering, carrying 5 years of total experience in the industry in Administration & Support of Intergraph’s Plant Design System (PDS) & Smart Plant software. Currently assigned as a member of T R Engineering LLC. (A Tecnicas Reunidas Group Company), Muscat, OMAN

M.Tech Transportation Engineer with 2+ years of experience

I would like to work as Process/Project Engineer/ Instrument and Control system Engineer in the oil & gas, Water, Paper, Mining, Food, Sugar, power plant, railway department or any other industry where I can utilize my extensive skills and experiences in a range of industries.

Safety Professional, 30 years experience construction, minin, environmental and hazmat

5 years Experience in Software Testing and Automation, Performance and Stability

Planning Engineer - 15 years experience Maintenance and Engineering, Projects experience, Shutdowns experience. Primavera, MS Project, Artemis, IMIS, SAP.

Construction Manager in Harbour and river construction, Offshore construction, Marine works, Land fall pipe installation, Dredging, Post trenching, Pipe laying, Tie in, Diving

Petroleum Engineering

I have attented Nigerian breweries one year technical training and i obtain necessary engineering skills in my studies as well in my higher school of learning

Bachelor Degree: Chemical Process Engineering

I am an Indian Mechanical Graduate Engineer with more than six years Multi-dimensional Experience in oil & gas related projects in India & abroad.

4 year Bachelor of Engineering Graduate Instrumentation Enginee,Automation Software Development for Three level Control System and Modeling the process for the purpose of control system design.

Worked across the procurement department on all categories including the management and administration of the entire procurement operation (sourcing, purchasing, 3rd party inspection, expediting, logistic, customs clearance, and warehousing) on a cradle-to-grave basis for EPC pipeline projects

- Skilled Control Panel Operator and Area Operator

Seasoned professional with 25 years’ experience in Maintenance, Erection & Preventive. Adept at implementing maintenance plans, handling repair work, Proficient in installing machines & equipments and endowed with strong analytical and problem solving abilities for max.machine uptime.

First Prev 151 152 153 154 [ 155 ] 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out