Resume - I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector ...

Misco Jobs

Resume #63683

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION_____________________________________________________________________________

Date of Birth ƒç January 15, 1974
Nationality ƒç Indian
Resident Status ƒç Employment Pass (Q1) Holder in Singapore

QUALIFICATIONS______________________________________________________________________________________

Academic ƒç University Degree
„Ñ Bachelor of Science (B.Sc.) with Chemistry, University of Burdwan - India

Technical

Coating & Painting ƒç NACE INTERNATIONAL, USA.
„Ñ CIP Level 3 (Peer Reviewed) - NACE Certified Coatings Inspector,
NACE International, Houston, Texas, U.S.

Passive Fire Protection ƒç „Ñ CHARTEK QA/QC Inspector and Applicator Training conducted and
Certified by International Paint.

EXPERTISED FIELDS_IN QC INSPECTION FOR OIL & GAS PROJECTS____________________________________

Protective Coatings & Painting ƒç Surface Preparation (Blast Cleaning, Water Jetting, Power Tool Cleaning, Hand Tool
Cleaning) & Protective Coatings of Various types.

Passive Fire Protection ƒç „Ñ QC Inspection for Cementatious Fireproofing Materials as well as CHARTEK,
Thermo-lag, Firetex, Pit-chart Fireproofing Systems.

Thermal Spray Aluminium ƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Galvanizing ƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Chemical Cleaning & Passivationƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Insulation ƒç Heat Conservation Type & Cold for Oil & Gas Projects.

Quality ƒç „Ñ Documentation, Quality Management System & ISO 9000

Health, Safety & Environment

EMPLOYMENT HISTORY_______________________________________________________________________________

May 2005 to present ƒç SMOE Pte Ltd, A SembCorp Utilities Company, Singapore, SEA.
„« QA/QC Senior Inspector - Lead Corrosion Protection

December 2004 to May 2005 ƒç Hyundai Engineering Construction Co., Ltd., in Tripoli, Libya.
„« QA/QC Engineer - Corrosion Protection

October 2003 to November 2005 ƒç Consortium of Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France
„« QA/QC Engineer - Lead Corrosion Protection

December 1997 to October 2003 ƒç Punj Lloyd Limited, New Delhi, India & Abu Dhabi, U. A. E.
„« QA/QC Engineer - Coating & Insulation

January 1992 to December 1997 ƒç M/s. B. B. Engineering, Durgapur, West Bengal, India
„« Senior Executive - Workshop

WORK EXPERIENCE SUMMARY_______________________________________________________________________

INTERNATIONAL EXPOSURES:

On-going International Projects with my present organisation in Singapore:

„« Bohai FPSO Project, China. Owner / Client - Conoco Phillips.
Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of
Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of
Equipments, electrical & instrumentation works.

Successfully Completed International Projects with my present organisation in Singapore:

„« Third Transmission Pipeline Project, Bongkot, Thailand. Owner - PTT. Client / Consultant - Bechtel International. Consortium - SMOE Pte., Ltd., - Singapore & Saipem s.a. - France. Works: Construction of Living Quarters & Process Modules for Offshore Platform System - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

„« Erha FPSO Project - Nigeria Deep Sea Water Project. Owner - Exxon Mobil (ESSO Exploration & Production Nigeria Ltd.). Prime Contractor - Saipem s.a., Paris, France. Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

Previous International Projects with my previous organizations:

„« Western Libya Gas Project, Onshore Mediterranean Sea, Tripoli, Libya. Owner - AgipGas BV Eni. Consortium - Snamprogetti SpA, Italy & Hyundai Engineering Construction Co., Ltd., Seoul, South Korea. Works: Construction of Onshore Gas Process Terminal - consists of Construction, Hydro test and Commissioning of Process Piping, Storage Tanks, LNG Tanks along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

„« Shell LNG Receiving Port & Terminal Project, Hazira, Surat, India. Owner - Shell International. Consortium - Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France. Works: Construction of LNG receiving Port & Terminal including Cryogenic Tanks & Piping, Structural Steel, Civil, Instrumentation & Electrical Works, Equipments erection & Installation.

„« MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Panipat Refinery. Prime Contractor - Daelim Industrial Company Ltd., Seoul, Korea. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, and Equipments.

WORK EXPERIENCE SUMMARY________________________________________________________________________

INTERNATIONAL EXPOSURES:

Previous International Projects with my previous organizations:

„« FUJAIRAH WATER & POWER PROJECT (Pipelines), Abu Dhabi (UAE). Client - UAE Offsets Group. Prime Contractor - Technip, GmbH, Germany. Consultant - Fichtner. TPIA - Bureau Varitas, Abu Dhabi Chapter. Works: Construction of 9 nos. Water Storage Tanks.

„« SULPHUR RECOVERY UNIT (SRU) & VIS BREAKER UNIT (VBU). Client - Chennai Petrochemical Corporation Limited (CPCL), India. Consultant - EIL. Prime Contractor - Petrofac International, USA. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks Including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

„« SULPHUR RECOVERY UNIT (SRU), OFF SITES & UTILITIES PROJECT. Client - IOCL Guwahati Refinery, India. Consultant - EIL. Prime Contractor -Siritec Nigi sPa, Itally. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

„« DABHOL LNG POWER PROJECT. Client - ENRON. Consultant - Bechtel. Prime Contacctor - Lintech / Skanska International. Works: Construction of 03 nos. 160,000 Cu.m. capacity LNG Cryogenic Storage Tanks and Regassification Unit, part of 2184 MW capacity distinguished power project.

„« MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Mathura Refinery. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, Civil Works, Instrumentation and Equipments erection.

„« LPG CRYOGENIC PAKAGE. Client - Reliance Petroleum Ltd., Jamnagar Refinery. Consultant - Noevel LGA / DNV. Works: Construction of 01 no. LPG Cryogenic Storage Tank and related piping works.

„« Marine Tank Farm Project. Client - Reliance Petroleum Ltd. Jamnagar Refinery. Consultant - Bax Counsel. Project management - Bechtel India Limited, S.A. Works: 23 nos. of Crude Oil Storage Tanks and related piping works.

WORK EXPERIENCE SUMMARY

- 13 years of total experience in protective coatings
- New construction onshore & offshore, Oil & Gas, Refineries, Steel & Power Plants projects
- Maintenance contracts onshore and offshore locations
- Shutdown contracts onshore and offshore locations
- Special skills in
- Coating, Painting & Linings
- Passive Fire Protection
- Thermal Sprayed Aluminium

Project Management

- Title, function, responsibilities and authorities
- Key contacts for co-ordination
- Scope of work, project contractual requirements such as milestones and completion schedule
- Design engineering, fabrication and construction sequence
- Review specification (including all amendments and pertinent appendices), applicable codes and standards
- Conflicting requirements, project field change requests, technical deviations and engineering change notices
- Pre-job conference records or minutes of meetings
- Attend ad-hoc clarification meetings with client
- Review tender documents for paint supply subcontract
- Attend tender clarification meetings with paint vendors
- Review paint vendor priced & un-priced (technical) documents
- Perform audit at paint vendor facility to assess capabilities
- Submit assessment report & recommendations on potential paint vendors
- Attend technical & commercial negotiation meetings with paint vendors
- Attend paint vendor finalization meeting
- Review paint vendor documents
- Project history or track record
- Project specific site technical representatives resume
- Key personnel - title, function, responsibilities and authorities
- Daily report or log
- Specific field tests & reports
- Laboratory test reports
- Review tender documents for blasting & painting subcontract
- Attend tender clarification meetings with subcontractors
- Review subcontractor priced & un-priced (technical) documents
- Perform audit at subcontractor facility to assess execution capabilities
- Submit assessment report & recommendations on potential subcontractor
- Attend technical & commercial negotiation meetings with subcontractor
- Attend subcontractor finalization meeting
- Review subcontractor documents
- Project history or track record
- Project organization chart
- Resume of key personnel
- Key personnel - title, function, responsibilities and authorities
- Manpower histogram
- List of plant, machinery, equipment, tools, inspection instruments & site office facility
- Procedures
- Inspection test plan
- Daily progress report
- Daily inspection report
- Review company procedures and inspection test plan
- Ensure effective utilization of subcontractor resources
- Monitor subcontractor performance
- Monitor project schedule planned VS actual
- Identify areas in critical path, cause and effect
- Establish, implement & monitor recovery plan
- Attend quality surveillance with client
- Conduct co-ordination meeting
- Conduct weekly meeting with subcontractor
- Review & verify subcontractor monthly valuation
- Advise contracts department on variation orders & claim
- Constant co-ordination with project management team
- Cause and effect of corrosion
- Protection, maintenance and prevention of corrosion
- Design and material selection
- Anti-corrosion protective coatings
- Surface preparation methods
- Mechanical surface preparation during pre-fabrication and onsite portable centrifugal blasting
- Open air blast cleaning
- Vacuum blast cleaning
- Hydroblast cleaning
- Wet blast cleaning
- Hand and power tool cleaning
- General uses of coatings / linings / wrappings
- Painting
- Galvanizing
- Thermal Sprayed Aluminium
- Passive Fire Protection
- High performance internal linings
- Tape wrapping
- Cement linings
- Self leveling compounds
- Anti-skid deck coatings
- Type of coatings commonly used and the major components of coatings
- General physical and chemical properties of the generic types of coatings and application process of coatings / linings
- Calibration of inspection and test instruments
- Using coatings inspection and test instruments
- Defects affecting performance of the applied coatings
- Causes for most common coating defects
- Inspection of defects on coated surface
- Acceptable and unacceptable defects
- Identification of defects and implementation of repair procedure
- Premature failure analysis of coatings
- Protective coating inspection standards for field and shop applications
- Internal spin blasting and spray painting methods
- Plural spray method
- Hot spray method
- Documentation

Enforcement and verification of work performed in accordance with specification, manufacturer recommendations and applicator coating procedure.

- Witness applicator qualification or trade test and paint system qualification
- Measure ambient conditions, surface temperature and air quality requirements
- Inspect location and suitability of access for areas of work
- Inspect type of blasting equipment and tools to be used
- Inspect type and size of blasting media
- Inspect metal surface imperfections / defects
- Test indication of oil or water in compressed air
- Test conductimetric analysis of water-soluble ionic contamination of blasting media
- Inspect pre-cleaning or solvent cleaning of surface
- Measure compressed air pressure
- Inspect degree of cleanliness required
- Measure surface profile of blast cleaned surface
- Assess surface cleanliness of blast cleaned surface
- Assess surface cleanliness soluble salt contamination on blast cleaned surface
- Inspect coating material storage conditions
- Inspect type of coating material to be used
- Monitor thinning, mixing, induction time and pot life
- Inspect type of coating application equipment and tools
- Monitor application method, type and pattern
- Measure wet film thickness by notch gages
- Non-destructive measurement of dry film thickness of non-magnetic coatings applied to ferrous surface
- Non-destructive measurement of dry film thickness of non-conductive coatings applied to non-ferrous surface
- Destructive measurement of dry film thickness of coatings
- Monitor re-coating and final curing schedules
- Test MEK resistance of Inorganic Zinc Rich Primers by solvent rub
- Test film hardness
- Measure the adhesion of coatings applied
- Test pull-off strength of coatings applied
- Test discontinuity (holidays or pinholes) of nonconductive coatings and linings

Health, Safety & Environment

- Understand local and international legal and HSE regulations
- Project specific HSE requirements
- Witness tool box briefing, safety surveillance & safety audit

Administration

- Delegation and distribution of responsibilities
- Employee recruitment
- Employee training needs & wellness programs
- Employee appraisal
- Constant interaction, counseling & team building session

OBJECTIVE

Obtain a position that will allow the utilization of my skills and knowledge tempered by over thirteen years of professional experience in Protective Coatings and Corrosion Prevention and ultimately, to become a long term, highly valued employee of a successful organization.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 10018)

Go to Search Parameters...

Brief Description

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

Innovative and motivated Electrical and Electronics Engineer with 15 years lead experience in Commissioning, Operations of Combined Cycle Gas Power Plants and Thermal Power Plants and Maintenance of Combined Cycle Gas Power Plants and Thermal Power Plants Control & Instrumentation and Electrical S

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

M.sc in Applied Geology with M. Tech In Petroleum Exploration and working with one of the most successful exploration company in India.

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Contract Oil & Gas Technical Writer Twenty years of progressive responsibilities in oil and gas industry.

Mapping, exploration, aerial primary data acquisition.

Police Officer ,Hostage negotiator, Field training officer, Investigation officer,MS Office,Communication skills

Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.

Can Handle any related Jobs such as Work Controller, Procurement Officer and Administration Assistant or Staff. More details mentioned on my Resume Body.

Management of geological work at rig, Detailed sample analysis including accurate porosity and permeability estimation; Petro physical QC; Geological Operational QC; Liaising with client Geologist, reporting and striplog submission, representing oil company at the Wellsite; Work in the W

9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.

I am hardworking, trustworthy and responsible. I can work under pressure with minimum supervision. I like to take challenges which has a growing and rewarding concepts; love to share and learn new ideas in my working environment.

I am an MBA student at College of Business School at Auburn University. I hold chemical engineering degree from India¡¦s Top Engineering School. I have strong reasoning and analytical skills. I have 3 years experience in Corporate Marketing with British Petroleum.

B.Sc (physics-instrumentation), ACAD and Microstation expert, Designing 12 years experience

I have endeavor to have broad base safety experience.

Responsible for managing the Project Electronic Document Management System (EDMS) which processes and stores all technical documentation including selected contractual and other correspondence.

Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

Experienced Consultant Wellsite Geologist with 10 years of International Experience

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

I have over 13 years in oil field and work in logistics for most of that 13 years.

project leader or senior engineer in oil , gas and petrochemical industries for projects and commissioning with middle ease, european and indian exposure for more than 13 years in production, operation, precommissioning and commissioning with smooth run and trouble shooting and DCS controls.

Graduate, PGDCA., Shorthand, typing, 16 yeas experience, 6 six in Middle East, Excellent Finance. administration, conract background

xsteel detailer/checker

I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.

I possess a BS in petroleum engineering, and ten years of work experience with Core Laboratories as Special Core Analyst (SCAL), duties including: performing laboratory analyses of petrophysical and fluid flow properties, coordinating projects, data evaluating, and report generation.

MAINTENNCE SUPERVISOR /ENGINEER/ CORDINATOR/ MANAGER

M.E. (Welding Engineering),

Production optimisation,workover, well test,drilling

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

BE (Electrical) from VJTI – Bombay with rich experience in Contracts & Procurement, MM logistics, EPC Project Management, Sales tender, Profit & Cost centre Operations in career spanning 25 years in India and Overseas for Oil and Gas Process, Petro Chemical, Metal, Power, Civil MEI Infrastructure BU

Contribution Twenty Two Years comprehensive professional experience encompassing the succeeding different area of responsibility.

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out