Resume - Entry level petroleum engineer with strong background in reservoir modeling/simu...

Misco Jobs

Resume #6381

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A challenging career oriented position in petroleum engineering

SUMMARY
Strong background in reservoir modeling/simulation, well logging/correlation, production engineering and petrophysics. Excellent knowledge and experience with various computer applications and packages. Excellent problem solving and analytical skills.

EDUCATION
Master of Science, Petroleum Engineering, May 2004
University of Texas at Austin, USA GPA 3.5/4
Masters Thesis
Simulating Enhanced Oil Recovery (EOR) by High Pressure Air Injection (HPAI) / Insitu Combustion in West Texas Naturally Fractured Light Oil Reservoir

Bachelor of Engineering, Chemical Engineering, August 1999
South Gujarat University, India GPA 3.8/4
Undergraduate Projects
Design and feasibility evaluation of a plant to manufacture MTBE at HPCL, Bombay Refinery
Incineration: Refinery Waste Management Systems at HPCL, Bombay Refinery

WORK EXPERIENCE
August 2002 – May 2004
Research Assistant, University of Texas at Austin, DOE-BEG-Pump Project
- Developed various water flood/in-situ combustion simulation models based on lab and field data
- Simulated various injection/production well strategies to obtain optimal production response
- Performed sensitivity analyses for various reservoir parameters affecting the production response
- History matched laboratory combustion tube data using combustion simulation model

August 2001 – May 2002
Teaching Assistant, Department of Petroleum and Geosystems Engineering, UT Austin
- Designed experimental setups for measurement of fluid properties
- Setup, testing and inventory of laboratory equipment
- Assisted students with homework on Transport Phenomena and Petrophysics

June 1998 – August 1998
Project Intern, Hindustan Petroleum Co. Ltd., Bombay Refinery
- Designed a Dual Pass Shell & Tube Heat Exchanger for heating Water using hot Oil
- Conducted material and energy balance calculations for the design of Catalytic Cracker unit
- Participated in pilot scale studies for Hydrodesulfurization of crude oil
- Studied and performed fuel sample analysis on Gas and Liquid Chromatographs

June 1997 – August 1997
Engineering Intern, Colourtex Dyes and Chemicals, Surat
- Designed Effluent Treatment Techniques for removal of oil from wastewaters
- Designed a reactor pressure vessel for manufacturing Reactive/Dispersive dyes
- Worked on installation and testing of a Multistage Centrifugal Pump

TECHNICAL SKILLS
Petroleum Industry Applications: Eclipse, STARS, IMEX, Jason Geosystems, PowerLog, FracProPT
Programming Languages: C/C++, MatLab
MS Office Suite: Word, Excel, PowerPoint, Publisher, FrontPage, PhotoDraw
Adobe Suite: Acrobat, Photoshop, Pagemaker
Operating Systems: Windows, UNIX, Mac

HONORS AND ACHIEVEMENTS
Poster Presentation Award for 'Waste Stabilization Ponds', IIChE, Punjab, 2000
Poster Presentation Award for 'Distillation Column Design', IIT, Bombay, 1999
Best Paper Award for 'Natural Gas' at National Technical Meet, South Gujarat University, 1998
President, Art of Living Club (Self Help/Community Service)
Best SPE T-shirt Design Prize, Two years in a row

RELATED COURSES
Advanced Reservoir Engineering, Advanced Well Logging & Correlation, Hydraulic Fracture Design and Evaluation, Production Technology and Design, Transport Phenomena, Advanced Drilling Engineering, Reservoir Geology And Advanced Recovery, Advanced Petrophysics, Energy Finance, Macroeconomics of Petroleum

REFERENCES
Available on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8001 to 8050 of 10816)

Go to Search Parameters...

Brief Description

Date of Birth : 29th February 1980 Branch : Electrical Engineering Institute : Jaipur Engineering College & Research Centre, Jaipur Languages Known : English, Hindi

See below.

Entry level petroleum engineer with strong background in reservoir modeling/simulation, well logging/correlation, production engineering and petrophysics. Excellent knowledge and experience with various computer applications and packages. Excellent problem solving and analytical skills.

To Become employed as a Instrument Designer

Three years of project controls experience in estimating, costing and scheduling/planning.

Over 8 years experience in the field of Lifting Equipment Inspection, QA/QC activities, Welding inspection, Product Inspection and Material Inspection.

I see basic understanding of geology, pore pressure prediction, procurement and bid process, drilling and rig equipment, well control, safety and risk analysis, well construction. I can work in teams or independently.

Resevoir Engineer

TO SECURE A POSITION IN WHICH MY EXPERIENCE AND SKILLS AS A REFINERY/CHEMICAL PLANT PROCESS TECHNICIAN WILL BE OF VALUE TO YOUR ORGANIZATION.

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Graduate Mechanical Engineer with a passion to work in an oil and gas platform.

Ambitious, enthusiastic and career-conscious, I am keen to acquire new skills and form part of a successful team. I would like to travel and apply the skills learnt during my Geophysical Sciences degree. Seeking to embark on a long and successful career in geophysics.

Engineering graduate with electrical branch

To pursue an excelling career in an organization that provides challenging and responsible opportunities where my analytical and functional skills and abilities will be an asset.

I am a Petroleum Engineer with a degree from the University of Oklahoma. I have two and a half years of experience working on offshore rigs in the Gulf of Mexico in drilling operations. I am interested in opportunities in the fields of drilling, reservoir, well or operations engineering.

Condition monitoring Engineer

Mechanical Engineer

Graduated in B.E. (Chemical Engineering) from Gandhi Institute of Engineering and Technology (GIET), Gunupur, under Berhampur University With 69.32% marks

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

An energetic, enterprising and hardworking strategist

MBA (Finance) Bronze Medalist with strong financial & credit analysis and risk assessment skils.

sales, marketing, business development general management

Engineering and Management

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

Excellent analysis and problem solving skills and able to multi task in industrial sites, factories and refineries. Have knowledge of electrical utilities and power. Expert ability to resolve conflicts during all stages of a project.

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

27 years experience primarily in oil & gas EPC/EPCM Project controls, Contracts, project management and engineering.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

I am a qualified analytical chemist, possessing extensive experience in international aspects of operations (U.S. EPA regulations, ISO 9001/14001/17025 standards, Project Safety Management PSM/OHSAS) with a wide range of technical proficiency in Health Safety Environment, waste management and docume

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Mercahant marine

Senior Manager looking for a new challenge with expectations of executive advancement upon successful proof of capabilities

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

I&C Technician with geothermal experience

Petroleum Engineer with 3 years of experience in the Oil Industry, Production Supervisor (1 y), 230 wells SRP, PCP, ESP. Logging Engineer (2 y). Responsible, team player, work under pressure, team leader, analytic. Computational skills.Ready to be relocated. Toefl IBT 100/120

QC Engineer/Inspector (Piping/Welding) with CSWIP 3.1

A well organized, dedicated professional, developing, presenting, and implementing value added recommendations for the improvement to the companies overall goals and employee¡¦s performance.

First Prev 151 152 153 154 155 156 157 158 159 160 [ 161 ] 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out