Resume - 13 years experience in oil, gas and petrochemical industrial dealing with instal...

Misco Jobs

Resume #63931

CONTACT INFORMATION:
View contact information...

Experience Summery
13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabia & Qatar.

Certified as Vibration specialist Category II from Vibration Institute-USA
Certified as Welding Inspector CSWIP 3.1 from Welding Joining Society TWI- UK
Certified as lifting equipment inspector from Lifting Equipment Engineering Association LEEA-UK

Experience also includes execute alignment, re-balancing, vibration analysis, review the equipment performance, perform reliability, availability and MTTF analysis for the rotating equipment, preparing the operating and capital budget, preparing the purchasing requests with the technical specification of the equipment and spars parts. Implementing of preventive, predictive and corrective maintenance strategies, implementing the highest philosophy of CMMS to achieve lower costs and higher process reliability. Perform visual inspection and proof load testing of lifting equipment and heavy construction equipment, thorough knowledge on RCM, API, ISO, and BS standards.
Employers
Bureau Veritas From Jan. 2006 to Present
Rotating Equipment Engineer Location: Qatar
Germanischer Lloyd From Nov. 2005 to Dec. 2005
Mechanical Inspector (QC/QA) Location: Qatar
Bureau Veritas From July 2005 to Aug. 2005
Vibration Specialist Location: Qatar
Suez Oil Company From Aug. 1995 to July 2005
Rotating Equipment Engineer Location: Egypt
Arab Egyptian Contractor From Oct. 1994 to Aug.1995
Construction Engineer Location: Egypt

Part Time Job
Centruion Petroleum Co. From Feb. 2004 to July 2005
Mechanical Consultant Engineer. Location: Egypt
The work cycle is one week on and one week off as the opposite work cycle in Suez Oil Company
Alstom Power Italy From Feb. 2002 to May 2002
Mechanical engineer Location: Saudi Arabia
Holiday without payment from Suez Oil Company to work with Alstom
Education
Master Degree in mechanical engineering from Oct.1996 to Feb.2002
B.sc in mechanical engineering from Sep.1989 to May 1994 with general grade Good and Excellent grade for the graduated project
Additional Qualifications
Certificate in Vibration specialist Category II from American Vibration Institute, USA Certificate No. 0610-3985A Valid till 31-12-2011 on Nov. 2006
Certificate in Welding Inspection CSWIP 3.1 from Welding Joining Society TWI- UK on Jan., 2007
Certificate in Lifting Equipment Inspection part 1 from Lifting Equipment Engineering Association LEEA - UK on April 2006
Certificate in Lifting Gear General from LEEA–UK on April 2006
Certificate in Lifting Gear Power from LEEA – UK on April 2007
Certificate in Runways & Light crane structures from LEEA – UK on April 2007.
Very good Computer skills (Word, Excel, PowerPoint, Ms Project, Visual basic, Visio Tech. Internet)
Published papers
" Investigation of turbulent heat transfer and fluid flow in longitudinal rectangular-fin arrays of different geometries and shrouded fin array" published in Experimental Thermal and Fluid Journal on 8, October 2002, Volume 26 Pages 879-900, web site www.elsevier.com.
" Experimental study of heat transfer and fluid flow in longitudinal rectangular-fin array located in different orientations in fluid flow " published in Experimental Thermal and Fluid Journal on 1, December 2004, Volume 29 Pages 113-128, web site www.elsevier.com
Professional Experience
1- Bureau Veritas (Qatar) from Jan. 2006 to Present
Position: Rotating Equipment Engineer
Duties:
On behalf of Bureau Veritas Provide technical assistance for different clines at Qatar as RasGas,
QVC, United Ready Mix, Shell Qatar, QXY, Trags, Dopet, Cape East related to inspection, installation, Maintenance, troubleshooting, overhauling, alignment, re-balancing, vibration analysis, reviewing the equipment performance, performing the reliability, availability, MTBF analysis and Root-Cause analysis for chronic problems for the rotating and static equipment.
Technical support for RasGas shut down group during plant shut down.
Third party inspection, testing of various lifting equipment such as tower crane and overhead traveling crane, pneumatic hoists, electric hoists, runway beam, offshore & onshore containers, transportation baskets chain blocks, polyester webbing slings, wire rope slings, shackles.
Issuing certification & documentation in accordance with the relevant British & International standards
Third party inspection, testing of various heavy construction equipment such as crane, excavators, loader, water tanker, rollers, compactors, tipper trailer, dozer, drilling rig, forklift.
Reviewing the NDT reports of critical welds on various load-bearing points of lifting equipment and also lifting lugs of the containers.
Witnessing pressure testing on hydraulic and pneumatic systems equipment as per the customer's specifications and approved procedures.
2- Germanischer Lloyd (Qatar) from Nov. 2005 up to Dec. 2005
Position: Mechanical inspector (QC/QA)
Work with Technip (Italy) on behalf of Germanischer Lloyd as QC/QA engineer during construction phase at ORYX GTL project at Ras Laffan, Qatar
Duties:
Responsible for all multi-discipline inspection activities during construction phases for Rotating equipment (air coolers, pumps, cooling towers, generators, compressors), Lifting Equipments (Overhead Traveling Crane) and static equipment (vessels, heat exchangers, boilers, flare system)
Preparing the punch list for defect points.
Monitoring for final completion of the work.
3- Bureau Veritas (Qatar) from July 2005 up to Aug. 2005
Position: Vibration specialist
Work with Qatar vinyl company (QVC) at their project at Mesaieed industrial city, Qatar on behalf of Bureau Veritas to carry out vibration survey for their rotating equipment and investigate the chronic vibration problems.
Duties:
Carried out vibration analysis for all rotation equipment (gas turbines, gas & air compressors and pumps) using condition-monitoring system (Odyssey software and Data Pac 1500).
Investigated the chronic vibration problems & issued support reports & recommendations to overcome the problems.
4- Suez Oil Company "Suco" (Egypt) from Aug. 1995 to July 2005
Position: Rotating Equipment Engineer
Suco is major joint venture petroleum company between EGPC (Egypt) & Deminex (Germany). Suco has gas & oil separation plant, gas injection plant, PLG plant, Power generation plant and three platforms. Suco main office located at 21 Ahmed Orabi St., El- Mohandsen, Cairo, Egypt.
Duties:
Supervises on execution of day-to-day preventive and corrective maintenance activities related to gas processing plant, oil plant, power plant and desalination plant.
Carrying out inspection, maintenance, overhauling, operating and troubleshooting for rotating equipment as gas turbines (Ruston TB 5000 & Solar Centaur type H), centrifugal compressors (Dresser- Rand, Sulzer, Solar & Elliott), reciprocating compressors (Ajax DBC 800 & Ariel JGK/4), Screw compressors (Kaldair), centrifugal pumps (Dresser-Rand, David Brown, Worthington & Ingersoll-Rand), reciprocating pumps (Desapro Milton Roy & FMC), gas engine (Waukesha VHP L 7042 GSI) Diesel engine (Cummins & Volvo), Air fan coolers (OLMI & I.M.S.), glycol & water heaters (K.T.I.), pressure vessels (I.M.S), valves (Ball, Gate, Globe, and Check), LPG loading arm (FMC), desalination plant (wear westgars ), deluge systems (Wormald)
Carrying out vibration data collecting, vibration analysis, reporting, and failure analysis for rotation equipment using condition-monitoring system (IQ 2000, Odyssey software and Data Pac 1500).
Carrying out alignment job for all rotating equipment by using Face & Rim method, Reverse method and by using laser devices.
Carrying out re-balancing for rotating equipment in one plane (static un-balance) and two planes (dynamic unbalance).
Prepares and issues the maintenance policies and strategies including determination of equipment criticality and defining necessary rules and analysis required for best maintenance type for each system.
Implementing reliability centered maintenance (RCM) to achieve lower cost and higher process reliability
Carry out hydrostatic test for static equipment (hear exchangers, pipelines and vessels).
Issue the work permit for schedule and un-schedule jobs.
Preparing total shutdown plans and estimates the required resources (manpower, spares& tools).
Reviewing the equipment performance to ascertain status, performing reliability and availability analysis and recommending optimum method to deal with chronic problems.
Preparing the maintenance operating and capital budget.
Review packages for new projects and recommends on equipment selection and redundancy and participates in equipment review and proposed new solutions alerts on adolescence of equipment.
Provide technical support to operations crew
Ensures that adequate provision is made for the availability of spare parts and materials for all maintenance work including the periodic review of stores 'stock holdings' and the identification of ordering of direct materials.
Assists in developing maintenance programmers for major overhaul of rotating equipment and installations with the objectives of achieving high service factors at optimum cost.
Creates necessary support document to follow equipment history, MTBF analysis, Maintenance reporting for major equipment overhaul.
Analysis of equipment history data in terms of failure and spare parts consumption.
Implementing the company health, safety and environment management police (HSE) and loss control system activities.
5- Arab Egyptian Contractor (Egypt) from Oct. 1994 up to Aug. 1995
Position: Construction engineer
A.E.C. is Arabic company work for construction of water plant, firewater plant and sewage treatment plants located at "1" Hamadan st., Giza, Egypt.
Duties:
Implement engineering studies and supervision on construction of water plant, firewater plant and sewage treatment plants as Alexandria firewater plant, Marsa Matrooh sewage treatment plant.
Part Time Jobs
1- Alwastani petroleum company "Wasco". (Egypt) from Feb. 2004 up to July 2005
Position: Mechanical consultant Engineer.
Wasco is joint venture company between EGPC (Egypt) and Centruion Company (Canada). It has liquidation natural gas plant (LNG). The main office located at Zahraa El Maadi, Cairo, Egypt.
The work cycle is one week on and one week off as the opposite of my work cycle in Suco.
Duties:
Supervision on installation, commissioning and start up for three Arial reciprocating compressor with their drive gas engines type Waukesha model VHP L 7042 GSI
Implement on job training courses for maintenance staff for all mechanical equipment in the gas-gathering unit.
Reciprocating compressor performance evaluation to adapt the gas overhaul production with gas well production.
Create a computerized maintenance management system "CMMS" for the company equipment.
2- Alstom power Italy (Saudi Arabia) from Feb. 2002 up to May 2002
Job Title: Mechanical engineer
Holiday without payment from Suco to work with Alstom at their project (Shoaiba steam power generation plant, 5 X 393 MW) at Kingdom of Saudi Arabia
Alstom is multinational company work for construction and maintenance of power generation plants located at P.le Lodi, 3, 20137 Milano, Italy.
Duties:
Supervision on installation, commissioning and maintenance of centrifugal pumps, steam turbine, and water boiler.
Professional Membership
Membership in American Vibration Institute, USA
Membership in Lifting Equipment. Engineering Association LEEA- UK
Membership in American Chemical Institute, USA
Membership in Welding Joining Society TWI- UK
Membership in Egyptian Society of Petroleum Engineers.
Membership in Egyptian Society of Engineers.
Training Courses
Attended several courses covering the following subjects (certificates are available)
Technical Training Courses;
Machinery vibration analysis (Vibration Institute)
Wilding inspection CSWIP 3.1 (TWI -UK)
Operation, maintenance & troubleshooting of gas turbine (HIS)
Industrial compressors (MERIT)
Diesel engine overhauling (Society Cooperation of Oil).
On alignment (SKF).
HSE Training Courses;
L.P.G. Safety (ICEMEC).
Safety introduction / H2S Awareness (Q-Chem)
RasGas Safety introduction (Qatar international safety center)
RasGas-H2S /BA (Qatar international safety center)
RasGas-PTW – Signatory (Qatar international safety center)
Computer Training Courses;
Microsoft excels (SUCO in-house training center).
Microsoft Windows (SUCO in-house training center).
Microsoft access (SUCO in-house training center).
Microsoft visual basic 6.0 (SUCO in-house training center).
Management skills Training Courses;
Technical language and report writing (American University)
Personal communication. (MADAC)
Middle level of management development (MAHARAT).
High level of management development (MADAC).
English language (MPC)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 9905)

Go to Search Parameters...

Brief Description

Process Operations Superintendent

4 year Bachelor of engineering degree. 21 years total experience. Familiar with drilling/workover /fishing operations and tools. Past three years working as Company man/Drilling supervisor.

Experienced In Construction & Commissioning Of Oil & Gas/ Petrochemical/ Refinery/ Fertilizer And Power Projects Both In Offshore & Onshore.

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

Please find enclosed my resume to be considered in a position as an Electrical, instrument and control engineer (design, cost estimator, operation and / or maintenance) within your company.

I want drilling supervisor/Rig superintendent job

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

A highly adaptable and meticulous Rotating Equipment Engineer with hands on experience on Centrifugal and reciprocating compressors, Steam turbines, Gas turbine, Pumps, Agitators, Fans and Blowers, Mechanical seals, Gas seals and Vibration analysis.

7 years in refining admin. and 8 years of oil well service

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

Extensive experience in the operations of oil & gas, refinery and hydrocarbon process

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

Experienced, commercially and technically aware Project / Construction Manager - Director. EPC project experienced for works up to 500 mil USD. Specialised in projects involving FPSO, offshore terminals (shallow and deep water), pipelines, platform fabrication, hook up and installation.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Canadian citizen, Bilingual, with long experience in project scheduling, cost control. Strong knowledge of the scheduling techniques and related computerized programs such as Primavera Project Manager (P3, P3e and P3e/C), Ms Project and MS Office.

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

A highly effective Senior Manager, who meets challenges directly, creates positive change and motivates teams to exceed goals. Proven record of success setting strategic direction, creating and executing solid asset management plans, improving operations and increasing profitability.

Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

I have twenty five years with Mobil/Duke energy in field and plant. I have three years with Northern Natural Gas as an operator

Sr. Piping Designer - CadWorx/AutoPlant

About 11 Years Experiece working in the Oil and Gas Sector as Document Controller/Turnover Document Controller/Turnover Engineer. I have worked for some of the reputed multinational Constrcution Companies like Chiyoda, Foster Wheeler and Toyo.

QHSE Manager having 13 years on IMS Implementation and certifications , have been worked in a multinationals companies like Weatherford and DSD

Over 25 years experience supervising the drillin of deep high pressure wells, both vertical & horizontial

Reliable and safety conscious, 41 Yrs old with 21 years plant operating experience in Oil and Gas Production, Gas Plant And petro-chemical industries within international environment

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

Occupational Health Specialist / Emergency Medical Doctor / Physician

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

city and guilds ,years ,1,2,3 . advance craft , higher national

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Analyzer and Instrument Technician, with significant experience through training and certification

I am a 22 years experienced african in the petroleum industry. I have a very good skill in general management and very good in credit and collections

SAP Program/Project Manager with multimillion dollar projects in Asia Pacific & Europe

Senior Real Estate Paralegal

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am an aspiring and dynamic Process Plant Operations Personnel with supervisory skills and overall experience of about eighteen years in petrochemical industries, possessing a Diploma in Chemical Technology. Background includes supervision/ operation of continuous and batch process plants.

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out