Resume - From my career, I have acquired considerable heavy equipment and stationary engi...

Misco Jobs

Resume #6411

CONTACT INFORMATION:
View contact information...

EXPERIENCE 2002 - Present Collicutt Energy Systems Red Deer, AB
Team Leader - Refabrication Projects
* Taking direction from the project manager, organize trades personnel to complete project scope on time and on budget.
* Supervise and provide hands-on assistance to complete engine and compressor overhauls, cooler section, process pipe and skid modifications and controls/shutdown changes and modifications as per customer request.
* Read technical manuals, prints and drawings to provide direction for trades people.
* Organize parts ordering and returns for jobs.
* Perform jobs in the shop and field and assist in unit start-ups as required.

Field Service Technician
* Operated a service truck to perform regular service and maintenance, emergency repairs and overhauls of all makes of natural gas engines, compressors and generators.
* Perform field start-up and commissioning of new and used units.
2001 - 2002 Calico Compression Systems Calgary, AB
Service Supervisor/ Millwright
* Perform commissioning, repairs, and maintenance as an authorized dealer for Atlas Copco electric and diesel compressors, Sullair drill, and Ingersol Rand industrial screw compressors.
* Authorized dealer for Hurricane compressors and booster to 5000 psi / 35 Mpa.
* Authorized dealer for Generon nitrogen generating equipment.
* Travel internationally to commission and repair air and nitrogen packages.
* Responsible for organizing work schedules, hiring and discipline of staff.
* Field and shop repair and overhaul of screw and reciprocating compressors, refrigerated and desiccant dryers.
* Manufacture of instrument air, service air and nitrogen skid packages.
2000 - 2001 Brooks Diesel Brooks, AB
Heavy Duty Mechanic
* Perform shop service as a dealer for Detroit Diesel Allison products.
* Provide shop service for four stage coil tubing compressors, including build up of a new units and repairs.
* General repairs on trucks, equipment and service rigs.

2000 M.L.R. Mechanical Ltd. Drumheller, AB
Heavy Duty Mechanic
* Provide field and shop service to the natural gas compression industry.
* Operated a service truck to provide regular maintenance, emergency repair and overhaul service on all makes of natural gas engines and compressors.

1999 Drum Diesel Drumheller, AB
Heavy Duty Mechanic
* Performed various general repairs and maintenance on all makes and models of trucks and trailers.
* Repaired and rebuilt various components on Cat and John Deere equipment for contractors.
* Performed the above in a flat rate environment.

1998 - 1999 K.S.M. Rig and Equipment Red Deer, AB
Heavy Duty Mechanic / Millwright
* Lead Hand in charge of building two swab rigs.
* In charge of wiring and cab assembly.
* Tear down, evaluation, rebuild, manufacture of rigs and their components including draw works, gear boxes, air & hydraulic systems, drive line angles and pumps / compressors.

1998 - 1996 Hi - Way 9 Express Ltd. Drumheller, AB
Heavy Duty Mechanic
* Repaired and maintained tractor and trailer fleet consisting mostly of Freightliner and International trucks with Cummins engines.
* Fabricated fifth wheel trailers and converters.
* Performed government safety inspections.

1996 Terroco Oilfield Services Ltd. Stettler, AB
Heavy Duty Mechanic
* In charge of maintenance and repairs of vacuum, tank, hot oil and bed trucks.
* Also in charge of maintenance and repairs for Impact Enviromental - a lease clean up company with Caterpillar equipment.
* Maintenance and repairs for Litvak-O¡¦Connor farm operations with John Deere equipment.

1996 S.R.M. Projects Ltd. Fairview, AB
Heavy Duty Mechanic
* Shop and field service mechanic for a pipeline construction company.
* Perform maintenance and repairs on Cats, side boom Cats, excavators, ditchers, heavy trucks & trailers and crew trucks.

1995 Charbec AG & Industrial Services Drumheller, AB
Heavy Duty Mechanic
* Repaired and maintained farm equipment including combines, swathers, tractors and grain trucks.

1994 - 1995 Richardson Bros. Construction Olds, AB
Heavy Duty Mechanic
* Repaired, maintained and overhauled in the shop and field Cat graders, dozers, loaders, buggies and packers.
* Performed structural fabrication and rebuild welding on tracks, packers, trucks trailers and off-road equipment.
* Repairs and maintenance to gravel crusher, screening plant, asphalt plant and paving equipment.

1993 - 1994 Hagel's Welding Calgary, AB
Heavy Duty Mechanic / Millwright
* Wired and assembled trucks for well cementing company.
* Installed power take-off units, drivelines, air and electric components.
* Performed light welding, cutting and grinding.
* Operated lathe to manufacture and size parts.

1988 -1993 Canadian Foremost Calgary, AB
Heavy Duty Mechanic / Millwright 1993
* Wired and tested engines, transmissions and chassis components.
* Assembled harnesses & cables and wired dashes and control panels.

Heavy Duty Mechanic / Millwright 1991 - 1992
* Provided assembly floor support in the cab bay and paint shop.
* Constructed five Vibrotech hydrostatic drive carriers for China National Petroleum Corp.

Heavy Duty Mechanic 1988 - 1990
* Responsibilities included servicing engines and transmissions, vehicle customizing, paint shop support, forklift and shop maintenance.
* Assembled in installed dashes and wiring harnesses.
* Manufacture of sub-assemblies using power and hand tools.

1992 -1993 Peacock Industrial Calgary, AB
Millwright
* Serviced and repaired compressor cylinders, gearboxes, valves and various pumps.
* Operated honing machines, presses, and all sizes of precise measuring tools.

1992 Steel International Calgary, AB
Millwright
* Constructed three acidifier rigs on Kenworth trucks for Nowsco.
* Mounted all pumps, tanks, motors, transfer cases and drivelines.

1990 - 1991 W.R. Scott Equipment Calgary, AB
Heavy Duty Mechanic
* Performed field and shop repairs and maintenance on electric and I.C. powered forklifts.
* Maintained rental fleet of Nissan and BT forklifts, Manitou rough terrain trucks and Ramrod skid steers.
* Repaired and rebuilt alternators, starters, engines, electric motors, propane components, hydraulic cylinders and entire trucks.
* Responsible for maintenance schedules, stock and general orders.

EDUCATION 1987- 1993 Southern Alberta Institute of Technology Calgary, AB
* Completed Heavy Duty Mechanics program as an Interprovincial Journeyman.
* Millwright program. I am currently submitting my qualifications to obtain Journeyman status.

ADDITIONAL COURSES 2000 Level One - Alberta Fire Fighters
2001 Endress + Hauser - Flow Meter principles and theory
2002 Hurricane Compressors - Theory and repair of reciprocating compressors
2003 Caterpillar Gas Engines 1
2004 Train the Trainer - Rigging and Hoisting

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6601 to 6650 of 10923)

Go to Search Parameters...

Brief Description

Mangement, and science

13 years experience in the field of QA/QC, inspection, NDT, welding, painting, ISO, mech. equipments etc.

Chemical Engineer, PGDBM, Advanced Process Control Engineer (RMPCT,SMOC/RQE), DCS(Yokogawa CS3000, Yokogawa Centum XL, Honeywell TDC3000), Process Simulation

I am M.Sc chemistry and haveing nearly five years working experience at labs of diffrent chemical industries. I want a Chemist job in UAE.

To take all the assignments as a challenge in order to uplift and maintain the goodwill. Dignity and growth of the concern that providing me knowledge, experience and growth of my career.

Extensively perform integrated study to generate reservoir characterization and geological modelling for field development plan within multidisciplinary team

Performed all troubleshooting, preventive and predictive maintenance on monitoring and control systems for petrochemical production operations. I can test, troubleshoot and correct production related processes through monitoring and control systems, safety standards in accordance ISO 14001.

As Reservoir/Petroleum Engineer, I have around 5 years of working experience with BP Pakistan E&P Inc. Earlier, I had done my Master's in Petroleum Engineering and bachelors in Mechanical engineering. Have excellent experience on the development of small oil and gas assets.

I am a well rounded geologist and am excited about applying my skills, as well as learn new ones, to the benefit of myself and my company. My MS is in structure and mineralogy from UNC Chapel Hill and my BS from SUNY Binghamton in geology with a concentration in geophysics as well as geomorphology.

Summary: Presently working for Transocean Sedco forex Offshore In as medic / safety. Open for worldwide placements and ready to travel extensively .

From my career, I have acquired considerable heavy equipment and stationary engine and compressor experience. This experience includes repairs and maintenance to complete overhauls and supervisory experience as a tem lead hand and shop supervisor.

-MS in Chemical Engineering -More than 3 years of experience in production and process upgradation with chemical process industry. -2 years of research experience in Natural gas processing -Proficient in CHEMCAD, ASPEN and HYSYS simulators.

4+ years experienced person, with specialization in the field of Geology, Geograpgic Info systems and Management.

Numerical/Experimental Study of Flow through Porous Media, Flow Visualization, Extensive C/C++, Matlab and Fortran programming experience, Production Engineering, Subsurface Modeling, Reservoir Engineering and Simulation, Production and Operations Engineering and Petroleum Economic Evaluation.

I POSSESS THOROUGH COMMISSIONING AND OPERATIONAL EXPERIENCE OF CRUDE DISTILLATION UNIT, VISBREAKER UNIT, LPG AND KERO MEROXES. I HAVE OPERATING EXPERIENCE NAPHTHA CATALYTIC REFORMER AND HYDROTREATERS. I HAVE EXPERIENCE OF DEVELOPING QEHS SYSTEM FOR THE ABOVE SAID PLANTS.

Objective: Career in Mechanical field, which affords an opportunity to utilize my qualification and join with a creative & innovative engineering team.

I have graduated with honours as a Bachelor of Chemical Engineering from The University of Melbourne. My desire is to put the diploma to use in the marketplace and to continuously learn new skills and improve existing ones.

Mechanical Engineer holding a Metallurgical and Materials Engineering Master of Science from the Colorado School of Mines, Golden, CO USA. Experiences in Automotive, Welding R&D, Welding Marketing. Eager to relocate and travel Internationally. Fluent in Italian, English, French and German

Nationality: Trinidadian (Venezuelan resident) Languages: Fluent English and Spanish Marital Status: Divorced Age: 35 Years born Sept, 06-1968.

Objective: To seek a position as Field Engineer in Petroleum/Oil/Gas company

Seeking for Mudlogging job

B.Tech in Electronics Engineering with over 8 years of professional experience in SCADA, PLC System and Control Panel Design in UAE, USA, and India.

Experience in welding inspection for the past 14 yrs, onshore and offshore experience. Involved in fabrication of Offshore steel structures, Chemical plants, Refinery, FPSO Turret Fabrication, both structural/piping. Interpreter films, CSWIP certificates, Diploma in EWF, IIWI.

A good detail of my career and prospects

ENGINEERING - PROJECT MANAGER Looking for challenging opportunities

I am an extremely committed and enthusiastic post-graduate with a wide range of skills. I am keen to learn new things, accept new challenges and firmly believe I would be a valuable addition to your team.

Oil/gas/water/wastewater electrical

High School Diploma A/B PLC 5, SLC 5/03 Wonderware HMI SCADA HVAC maintenance Generator maintenance Instrumentation technologies Electronics level 1 AC and DC drives Ross Hill SCR IPS SCR Instrumentation technologies Journeyman certificate (Alberta) With Red seal status

I am procurement engineer who have worked several years in oil and gas fields in middle east.

Dedicated and internationally experienced individual with a broad range of knowledge in engineering, finance, and consulting within the oil industry. Possesses a master's degree and five years of applied professional experience. Skilled in conducting economic portfolio reviews of various assets.

Please see attached resume for work history, experience, and education in your related fields.

14 years in the energy community. Expertise in project coordination, technical knowledge, and communication skills. Comfortable with all aspects of industry. Project promotion, development and production through sales and fiscal accountability.

I am a new graduate geologist. During my academic career, I have worked on several large independent and team projects including my master’s thesis. These have developed my independent working, teamwork, and time management skills.

I am an Electrical engineer working as Sr. Engineer Electrical in Cairn Energy India Ltd, a UK based Oil and Gas Industry in India. I am having nearly 7.5 years of Maintenance experience in large petrochemical and Oil and Gas Industry in India.

Fourteen- (14) years experience of detail structural engineering in various on shore field which include oil refineries, gas treating facilities on shore platforms, well-head and inter-connection bridges, industrial building.

To acquire a Full time/Internship position as Natural Gas/Chemical Engineer that utilizes my logical, interpersonal and technical expertise

I would like to seek the new environment of working experience with the new culture religion, creativity and innovative which can increase my self-esteem to be a project manager in future.

Electrical engineer with experiance in Testing, Quality, Maintanence

B.E Mechanical Engineering and also completed NDT Level II as ASNT Standards

Industrial Electrician/Instrumentation Technician with Linesman training

Flexible, adaptable, anticipate, working in teams, independent, perseverance, working in extreme circumstances and improvise, eye for detail, patient and supervising small groups.

15 years experience as a senior production technician in oil and gas industries onshore and offshore, B-tech mechanical diploma , certificated supervising HSE by WSO and 3 years supervising and site management blasting painting activities.

Twenty years project management experience in Capital (FEL&EPC), R&D, NPI and Process Transformation projects in the oil & gas, metal, plastics, automotive and consulting services industries. Human, leadership, operations and project management skills.

Five years of experience in abroad with M/s Nasser S Al Hajri Co. Ltd. in handling all kinds of office administration, operational, technical related clerical support task through coordination of diversified administrative and technical service in construction works in Qatar. Well versed in Computer

I am a graduate with Chemistry in 1st class having 24 years experience as a Chemist/ Senior Lab Technician in Petroleum Refinery (Takreer, ADNOC) (10 Years), Natural Gas Plants(5 years) (in Malaysia and DUGAS), Petrochemical Plants (5 Years)(MTBE & Pentaerythritol) and 3 years in Pesticide

Proficient in title research from sovereignty to present, Experience in GIS mapping and Deed Plotter, Expereinced in a Microsoft WIndows: Excel, Access, Word, Powerpoint.

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Operates surveying equipment and obtains data pertaining to lines, corners, elevation, grades, curves, alignments, and positions and maintains records of this information. Utilizes the Global Positioning System to collect utility assets. Gathers data on utility assets in preparation for design.

Highly motivated and disciplined. Able to multi-task and prioritize responsibilities in an efficient manner. Adapt well to environmental changes. Possess excellent communications skills. Proficient in all MS Windows and MS Office Products, as well as various land tracking software. Member of AAPL

Im certified Coating/painting Inspector.Having more than 6 years experienced as painting Inspector

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 [ 133 ] 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out