Resume - Computer :

Misco Jobs

Resume #64539

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
- Post Graduated Study in Electrical Power System.[Obtained From Higher Stududies Dept] JUNE 2005.
Bachelor of Science in ELECTRICAL ENGNEERING (B.S.EE) JUNE 2003.
Department: Electrical Power & Machine Dept. MANSOURA UNIVERSITY,EGYPT
Grade: First Class, with an Excellent Grade in Dynamics Stability of Multiphase Power System.
High School Diploma "Science & Mathematics", JUNE 1997.
Average Grade: A
English Language Training Course: Faculty of Commerce Mansoura University, OCTOBER 2003.
Computer Maintenance Training, SEPTEMBER 2003.

Practical Training Experience:

1. (15/07/2000) Training at High Voltage Lab. at Faculty of Engineering, Mansoura University.
2. Training in Talka Power Station Electric Company ( 08 / 2001 year )on ;
(15/07/2001) Gas & Vapor Electrical Generation Techniques at Talkha Power Station.
(15/09/2002) GIS (Gas Insulation System) at Talkha Power Station.

Generating Electricity from Gas Turbine Station and Steam Turbine station.
Distribution system for Electricity and Setup on main network.

-OBJECTIVE:
-To find for an established company that will further enhance my career as Electrical Engineer and provide secured source of income for my family. In return, I will give every effort in my capacity to help the company achieve their goals.
------------

WORK EXPERIENCE:
Experiences:
Work Experience In Egypt:

Company Name: Talkha Petrochemical Industries
Worked as: Assistant Electrical Engineer
Period: June 2003 to march 2005.

Conceptual and Detail Engineering for Major Electrical Equipments like Motors, Transformer, Switchgears up to (33kv) and other protection devices.
Experience in Design of UPS including Load Calculations, Sizing, Voltage Drop Calculations.
Design and Installation of Transformers and its Protection.
Installation and commissioning of both power and distribution transformer.
Design and Installation of LT & HT Feeders.
Design and Erection of Overhead Cranes.
Well worse with planning and Documentation works.
Well worse with the safety procedures of petrochemical project.
Design and Maintenance Support of Medium and High Voltage Distribution System
Experience in Boiler and its Auxiliary Equipments.
Experience in Specifying and Preparing Requisitions for Purchase of Electrical Equipments.
Preparing of Cable Schedule and Cable Tray Wiring and Termination drawing for LT, HT and FO Cables.
Experience in various Protection Devices like Overload Relay, Distance Relay, Short Circuit Protection, C.T, P.T and Earth Protections etc.
Experience in Design and Installation of Paging System and Fire Alarm System.
Experience in Lightning Protection System, Lighting and Fixtures.
Design & Installation of the Bus Coupler and Bus Duct. Involved Design, Estimation, Erection of various Control Panels.

Work Experience In Kuwait:

Company Name: ALMEER TECHNICAL SERVECE COMPANY [ATSCO].
Worked as: Electrical Engineer
Period: June 2005 up to date

Worked in [MOIP Phase-1]Project. In M.A.A (KNPC)
As electrical Engineer for RMP CCR for upgrading all UPS system Cross linking calculation for the respective UPS system &Removing DC system
Replacement of Paging system &intercommunication system
Experienced in electrical startup and commissioning, computerized maintenance management systems (CMMS),
Experienced at plant electrical power distribution systems; installation of instrumentation, DCS, PLC systems and variable speed drives; sizing of control valves and development of P&IDs; and instrument and electrical standards and calibration procedures.
Skilled at supervising and training electrical and instrument technicians. Familiar with the writing of technical standards, manuals, specifications, and contract documents. Computers skills.
Well worse with planning and Documentation works.
Well worse with the safety procedures of petrochemical project.
And, a quick learner of any new computer software package.

Languages:

„« Bilingual: Arabic as the native language plus English as a foreign language.

Management And Accounting Skills.

EDUCATION & CERTIFICATION:
- Post Graduated Study in Electrical Power System.[Obtained From Higher Stududies Dept] JUNE 2005.
Bachelor of Science in ELECTRICAL ENGNEERING (B.S.EE) JUNE 2003.
Department: Electrical Power & Machine Dept. MANSOURA UNIVERSITY,EGYPT
Grade: First Class, with an Excellent Grade in Dynamics Stability of Multiphase Power System.
High School Diploma "Science & Mathematics", JUNE 1997.
Average Grade: A
English Language Training Course: Faculty of Commerce Mansoura University, OCTOBER 2003.
Computer Maintenance Training, SEPTEMBER 2003.

Practical Training Experience:

1. (15/07/2000) Training at High Voltage Lab. at Faculty of Engineering, Mansoura University.
2. Training in Talka Power Station Electric Company ( 08 / 2001 year )on ;
(15/07/2001) Gas & Vapor Electrical Generation Techniques at Talkha Power Station.
(15/09/2002) GIS (Gas Insulation System) at Talkha Power Station.

Generating Electricity from Gas Turbine Station and Steam Turbine station.
Distribution system for Electricity and Setup on main network.

ADDITIONAL INFORMATION:
„« Playing chess and more than just amateur.
„« Watching movies and fond of mythology movies.
„« Reading, especially the short stories and the daily newspapers and magazines.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3001 to 3050 of 9905)

Go to Search Parameters...

Brief Description

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

15 years of utility/specialty chemical management experience.

. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.

Presents and reports the project status to the top management.

I am expert in Mechatronics field.

As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.

Refinery / Utility Plant Operator

07 years extensive experience holding a various positions in different phase of the projects in the field of Instrument Pre-commissioning, commissioning, start up,

NG reforming, Shift convertion, Syn gas production, Diffferent types of pumps and compressors, heat exchangers, catalytic reactor operation

I am a Mechanical Engineer and have more than 6 Years Experience in Piping Design and Stress Analysis Engineering. I have worked with CAESAR II software in developing Piping Stress Analysis and I also have substantial experience in the design of interactive CAD software; Moreover, my job involves sp

GIS/CAD specialist

As Cathodic Protection Engineer in Power Plant / Oil & Gas Industries with about 7 years experience; having knowledge on diverse Construction/Engineering Design /Commissioning/Maintenance activities with extensive experience on Cathodic Protection with NACE Level II certification.

I am searching for a job as a pipping stress and supporting engineer in KL, Malasia and I am expert in using CAESAR II and PDMS and ANSYS soft ware

Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.

A highly motivated, adaptable MSc graduate.

Plant operator

Surface well test engineer

I 'am a highly skilled Sr. Lead Operator, with a strong English language, highly motivated, always exceed my employers expectation, hold a 2 years Oil & Gas Handling diploma, various computer skills " SAP, Lotus, Excel, Access, Word, Process Net a semi HMI Building Progam.

Progressive EMS Paramedic Exp.

I have earned 20+ certifications and growing. Is attached to my resume.

Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience

Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins

More than 25 years experience in electrical field.

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

AWS, CSWIP 3.1 AND ASNT LEVEL II IN RT,UT,MPI & DPI

Pipe stress engineer with eight years experience.Software Caesar II.

8 + years Oil & Gas field experience in Instrumentation and Control engineering. Lastly Worked as Assistant Resident Engineer for Tyco Fire & Security, UAE

11years experience in the field Mechanical Maintenance of Machine shop and Foundry

Gas turbine, Boiler, Water treatment, Oil and gas operator

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

Condition monitoring Engineer with 7 years experience in oil and gas industry

I have been involved with many projects throughout these regions, from Heavy Construction, Platform Installation and Inspection IRM programs.Also I have more than 3 years experience in NDT/Welding Inspector in various project. I just recently pass my Subsea Insp. Controller CSWIP 3.4U(TWI-UK).

Piping, mechanical, stress analysis, nuclear

I have done Master from M.Sc. Chemistry. I worked in Shell Pakistan Ltd. as a Q.C.Analyst.

KNPC & KOC approved planning engineer for EPC projects,Involved in Planning and coordination for the KNPC GRTA- 2006 shutdownInvolved in Planning of Major Shutdown for KOC -GC 27

An experienced metocean engineer/hydrographic surveyor/GIS technician/coastal engineer seeking suitable positions in related fields

Welding and NDT Supervisor, Lifting Equipment Inspector

Subsea Pipeline & Riser Installation engineering with Offpipe or Orcina Software(Orca Lay, Orca Flex

Computer :

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Welding Superintendent: SSCL. DME (3years welding), WI (QA/QC) 1992, Safety Training qualified and 21 Years Experience (QA/QC Welding Engineer-01 Year; Welding Supervisor--12 Years; Welding Educator-04 Years; Welding Instructor-02 Years) in working with ASME, AWS, API standard in EPC Industries

WORKING AS ASSISTANT MANAGER - PRODUCTION / SHIFT INCHARGE IN A LEADING PETROCHEMICAL COMPANY AT IMPORT, STORAGE & HANDLING TERMINAL

DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

cartographer - gis

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

First Prev 51 52 53 54 55 56 57 58 59 60 [ 61 ] 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out