Resume - 15 years of experience in plants operation as panel operator, plant operator, te...

Misco Jobs

Resume #65283

CONTACT INFORMATION:
View contact information...

Operadora Cerro Negro, ExxonMobil Subsidiary, 1999-2007. Crude Oil Upgrader Facility.
Process Unit Team Leader for Turnaround and Projects:
I assigned to Turnaround and Projects Teams to revise documentation, verify field modifications, follow up to construction and participate during commissioning and start up. I prepared start up and process procedures to the new and modified equipment and piping systems, status reports and supported planners to include shutdown/start up activities and required isolation blinds into the master plan. I participated in the Extended Work Permit implementation process. During Execution of the projects and turnarounds, I was responsible to coordinate the issue of work permits, reviewed job safety analysis, inspected and signed equipment closure forms and mechanical acceptance on process system for a safely and reliable start up.
Process Team Leader for Treatment and Utility Units. I was responsible to supervise Production Technicians and Panel Board Technician Team in order to warranty production goals at Naphtha hydrotreating, Sour Water Stripper, Sulfur Recovery, Amine Treatment and Sulfur Solids Handling Units. I prepared process guidelines for the process shift, including planned maintenance activities and emergency response drills. In this position I reported to Process Superintendent and participated in accident investigations, prepared shift reports, coordinated any corrective maintenance required at any of the mentioned units, coordinated the implementation of Emergency Contingency Plans and guarantied the availability of supplies and chemicals required to ensure process continuity.

Shipment Coordinator:
I was responsible for management all those activities associated with the strategy to storage, delivery and/or transport Synthetic and Diluted Crude Oil, Diluent, Coque and Sulfur at the Jose Upgrader and Pipeline System. I was accountable to deliver a daily distribution (Feed and Products) plan to determine the rates to the units. As Shipment Coordinator I developed the Shipment Guidelines, Shipment Report, Shipment Intention Letter and Shipment Notification letters. Also I executed daily production and Inventories report follow up, delivered monthly shipment report, Diluted Crude Oil received and delivered to unit, diluent, LCGO, AGO and naphtha productions. I kept continuous communication with the ExxonMobil Commercial group and Planners/Scheduling Engineers in charge of planning feed & products inventory and loads management, in order to define and prepare the operational strategy in the process units. I was also responsible that products storage strategy were aligned to accomplish quality specifications and commercial shipping schedule. Coordinated oil transfers activities between Petro-Terminal Jose, OCN Downstream and OCN Upstream. I ensured the follow up and the application of all OCN and Venezuela safety and environmental regulations during the shipping process.

Panel Operator:
I was in charge for operating, watching and controlling the process and the environmental emanations of the naphtha hydrotreating, hydrogen, sour water sulfur recovery and sulfur solids units, interacting with control systems I/A FOXBORO, the Distributed Control System (DCS) and applications for analysis and detection on time of flaws as PI System implemented at Jose Upgrader. This responsibility included analysis and precise adjustments to control process indicators and tendencies in order to support the operational continuity on the plant, optimize the process, get quality products and ensure high equipment reliability. I participated in the preparation and execution of process manuals based on ExxonMobil Standards. In addition, I was responsible to report any alarm fail or emergency system activation. I participated in shift handover meetings ensuring process continuity and highlighting any adjustment condition required or implemented. I coordinated the equipment preparation for any maintenance activity planned for the current or following shift.

Shift Operator Technician for Treatment and Utility Units:
During construction of the facility, I was responsible for commissioning activities and participated in the preparation of Start Up and Operation Procedures for Naphtha Hydrotreating, Hydrogen, Sour Water, Sulfur Recovery and Solid Sulfur Units. After start up I was accountable for checking and controlling safety and equipments operations conditions by the fulfillment of operational standards, to ensure the process continuity with minimum impact in costs and environment. Also I was responsible to operate furnaces, pumps, compressors, and other Plant equipment to ensure the operations effectiveness, also identified and implemented corrective actions by the continuous inspections of the equipment, to ensure reliable and safe operational conditions. Functioned as Equipment Care Technician, and routinely used Maintenance skills in performing simple maintenance activities. Prepared the equipments that should be taken to Maintenance for their repair, in compliance with safety, standards, to meet timely with unit preventive and corrective Maintenance planning. Ensured the personnel and facilities safety and security, and keeps them clean and in good order, to avoid accidents, conducting in depth monitoring and preventative maintenance. Executed operation procedures, in compliance with operational standards to ensure continuity in the process based on operational objectives. Recorded all relevant operational events and provided detailed, clear and accurate information during shift handover, to keep updates of Unit conditions and reduce equipments adjustment time. Direct the implementation of Units Training Programs and required expertise levels, and increases personnel training and added value to the operation. Take samples of products for laboratory analysis. Controlled and monitored jobs carried out by Maintenance area teams.

Other Responsibilities:
Participated in the preparation of Risk Assessments and "Management of Change" associated to procedures and activities developed at the Treatment and Utility Units.
SHERPA Leader for process department, responsible to provide guidance and orientation to accomplish high safety behavior at the facility.

Venezuela Oil Company Petroleos de Venezuela, PDVSA 1993-1999. Crude Oil Refinery.
Shift Operator Technician in Catalytic Unit:
Accountable for checking and controlling safety and equipments operations conditions by the fulfillment of operational standards, to ensure the process continuity with minimum impact in costs and environment. Also I was responsible to operate furnaces, pumps, compressors, and other Plant equipment to ensure the operations effectiveness, also identified and implemented corrective actions by the continuous inspections of the equipment, to ensure reliable and safe operational conditions. Functioned as Equipment Care Technician, and routinely used Maintenance skills in performing simple maintenance activities. Prepared the equipments that should be taken to Maintenance for their repair, in compliance with safety, standards, to meet timely with unit preventive and corrective Maintenance planning. Ensured the personnel and facilities safety and security, and keeps them clean and in good order, to avoid accidents, conducting in depth monitoring and preventative maintenance. Executed operation procedures, in compliance with operational standards to ensure continuity in the process based on operational objectives. Recorded all relevant operational events and provided detailed, clear and accurate information during shift handover, to keep updates of Unit conditions and reduce equipments adjustment time. Direct the implementation of Units Training Programs and required expertise levels, and increases personnel training and added value to the operation. Take samples of products for laboratory analysis. Controlled and monitored jobs carried out by Maintenance area teams.

Computer Skills
Competent in PI System - Plant Information System, RTIS - Real Time Information System, DCS -Distributed Control System, IA Foxboro System, MS Office and Lotus Notes.

Language skill
Advanced level in write, read and speak spanish
Intermediate level in write, read and speak English

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 10917)

Go to Search Parameters...

Brief Description

Education : Diploma in Mechanical Engineering.I am having 19 years experience (11 years in Gulf + 8 years in India) in the field of piping works in Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.

Career petroleum E&P, Refining, Laboratory, Technical, Management, Administrative, Patents, Contracts, Sour Gas, Start-ups, Debottlenecking

5yr experience in Piping Design (PDS), Layout Planning, Project Planning & Management, Erection supervision & support.

I have experience in drilling, formation evaluation and geosteering

Have passion and experience working in oil and gas industry mainly in mantainence services.

I am a person of cheerful disposition,taking instructed tasks reasonable easy all the times but affable with a will to succeed in

Intersted in refinery, explorationtion & process operations

API-510 inspector and level II NDE RT,UT,MT,PT,VT. College educated with turnaround inspection experience in refineries. Chemical plant, pipeline construction, power plants, and aerospace experience.

Industrial instrumentation and control

efficient deck maintenance,steering a ship,maintaining watch duties,good communication skills and qualification 10+2(physics,chemistry,maths,computer science)

B.COM , ASNT LEVEL II NDT INSPECTOR

Electrical Designer 12-1/2 Years of Exper. Layouts Cable trays/trench, Grounding, Power, Lightings, Tele Communication, Fire & Gas detectors, Multi Cable Transit (MCT) & related supports details. Single Line & Interconnection wiring block diagrams. Power / Instruments, Fire & Gas Cable Schedule etc.

My curriculum vitae includes detailed personal information as well as skills and qualifications, trainings and seminars.

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

Power sector professional with over 20 years of experience in O&M of thermal power plants

B.E.Electronics and Instrumentation

Skilled geologist looking for an opertunity.

Self-confident, hardworking and familiriaty in team-work

A very skilled Geomodeler competent in the use of Schlumberger PETREL 2008 for Static Reservoir modeling and Hydrocarbon Volume Calculation with a solid background in Reservoir Engineering and the applications of PERFORM in Well Design and modeling, also with Quality HSE Training from Shell(SPDC)

Subsea Pipeline Design Engineer

Pipe Stress Engineer

2 years Experienced Offshore Field Engineer working in platform construction

B.E.Mechanical Engineering....skill known Auto cad Pro-E,Ansys,Plant Design System ,piping design,hass

DIPLOMA IN MECHANICAL ENGINEERING, AUTOCAD 2008, CADWOX PROFESSIONAL 2008,PVLITE 2005

ArcGIS, Oasis Montaj, Uxolab, AutoCAD, MathCAD

I have 3-D drafting skills in Auto Cad Inventor AutoCad 3-D wire Frame I also Have experince in creating electrical schematics for offshore equipment.

15 years of experience in plants operation as panel operator, plant operator, team leader, shipment coordinator and superintendent in venezuela in companies such as PDVSA and ExxonMobil in units such as naphtha hydroteater, hydrogen, amine, sour water, sulfur recovery and tanks movements

PROJECT/DESIGN ENGINEER FOR FIRE PROTECTION SYSTEM

Proven oil and gas manager

Production operator,wireline operator and mechanic.

Experienced Exploration Geologist with over fours years’ field experience.

Electrical techinician work on FPSO/Rig and power plant

Mechanical Engineer, with 11yrs exp, Specialized as Coating/painting engineer implementation of different types of coating techniques, practices, Corrosion control Operations, scheduling and monitoring. Been a Coating Inspector & QC Inspector & NACE Corrosion Inspector - Level 1

Construction of Transformer building Construction of Utility Building Construction of electroplating building. Construction of RCC Over Head water Tank Construction of Offices Buildings

B-tech Hons Mechanical

My Name is Asif Naeem &My Edgucation in Diploma of Mechanical Engeering&My exprience in Mechanical Techniction&Fabrication

landman

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

I am Electronics & Communication grad from India with more than 3 years of experience in Electrical & Instrumentation.I have through knowledge of SAP PM module.

Experienced Landman seeking a challenging work environment

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

Snubbing / Workover Supervisor, Field Technician.

Senior Design Engineer - Electrical

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Working Offshore as an engineer and mechanic for 15 years

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out