Resume - 20 Years of consolidated experience in classroom and on the Job Training and dis...

Misco Jobs

Resume #65353

CONTACT INFORMATION:
View contact information...

Educational Qualification:

Technical: Diploma in Electronics Engineering

: JTSLC in General Engineering

: Computer Programming in FORTRAN IV
: Programming in JAVA, HTML.

Certification: Possess A1 Assessor certification from Edexcel

: Train the Trainer Programme arranged and conducted by Polyglot Oman.

HSE and Technical Training:
1- HSE courses:
(a) HSE induction training (b) First Aid and basic Life support (c) Basic fire & Fire warden
(d) Job hazardous Analysis (e) PTW Signatory course PDO (f) PTW holder of QP, BLNG
(g) H2S awareness course
2- Technical Courses:
(a) Honeywell DCS-TDC 3000 operation (b) Foxboro DCS I/A series
(c) Foxboro SPEC 200 system (d) Relay based ESD system (e) F & G detection system
(f) Bently Nevada's 3500 Vibration monitoring system Operation & maintenance and System 1 Course.

Professional Experience:

Highlights of Training activities:

* Design/ Develop and deliver corporate Technical short courses for Established Technicians.
* Assessment of candidates at Level -2 and Level-3 using NVQ (OPITO) standards
* Develop and Deliver competence based training program - On job, off job and basic HSE
* Identify the competence gap and nominate/ implement training program
* Develop and Monitoring Trainee Performance reports (TPR)
* Assist to develop OJT program, task checklist and maintain progress records
* Mentoring of OJT candidate and assist to prepare evidence portfolios.
* DCS Operation, Foxboro I/A, Honeywell TPS/ TDC 3000
* PLC, Safe Guarding System – Mitsubishi, Allan Bradley, Honeywell FSC system
* Field Instrumentation

Highlights of EPC&C, maintenance activities:

* Site Survey & Man-hour Estimate
* Tendering, Planning & Scheduling,
* Field Design & Detailed Engineering
* Overseeing the Installation of Electronic/Pneumatic Field Instrumentation & Control systems such as DCS/ PLC systems of Refineries, Power Generation Plants and Petrochemical industries,
* Supervision of, Calibration, Testing & Commissioning of field Instruments, Control valves & Emergency Isolation Valves, DCS, PLC, ESD and Gas Monitoring system.
* Assistance for plant start-up & commissioning of various facilities.

List of Clients/ Consultants worked with:

Petroleum Development Oman, Qatar Petroleum, Brunei LNG, Nigata Japan, Foxboro Singapore, Toyo Kanetsu K.K.Japan, CCC, ADCO Abu Dhabi, ADNOC Abu Dhabi, GASCO Abu Dhabi, NOC Iraq, Comprimo, MESC Japan, JGC Japan, AMOCO, Technip France, Engineers India Limited and H& G India

Key Position Handled:
Off the Job Trainer-instrumentation
On the job Trainer –Instrumentation
Field Design Engineer (C& I)
Estimation and Costing Engineer (C& I)
Senior Supervisor (C&I)
Inst. Construction & commissioning Engineer
Inspection and Testing Engineer
Specific Personal Qualities:

I have wide international experience and have worked extensively in the oil and gas industry. I have worked in a number of supervisory positions and able to drive a team and work well as a team member.
As a Competence Assurance Assessor and Trainer, having genuine interest in Training and Development. Having a pleasant and personable nature, capable of working with different cultures and able to develop good working relationships with the trainees and their supervisors.
I have worked in numerous multicultural environments, my jobs have been centred on nationalizing the work force and I have had considerable experience and success in this area.

Skills:

* Development and Delivering Instrumentation Training materials to new hires / trainees and employees/ incumbent personnel.

* Advise management on training needs, training developments, and procedure improvements accordance with NVQ, competence assurance and assessment programme.

* Conduct regular classes on process control instrumentation,

* Conduct discipline specific, workplace based skill and knowledge assessments.

* Handling shutdown jobs, Revamp jobs and expansion jobs of Refineries/ Oil gathering stations.

* Conversant with Refineries/ oilfields Work permit, Safety and Operating systems. PTW and H2S & BA holder

* Conversant with Instrumentation Design Standards and Codes of API, ISA and Familiar in Shell standards and codes (DEP/ MESC) other international Engineering Standards.

Systems Worked On:

Distributed Control System (DCS) (Foxboro IA Series, Honeywell TDC 3000)
Foxboro Spec200 system, Endress & Hauser, Hasler system
PLC from Siemens, Allen Bradley & Relay Logic controls system.
Fire and Gas detection system from Rexnord Ronan, Oldham, Watter-Kiddie, General Monitors, ICS, Seiger and R&H
Gas chromatography -Fluid Control system.
Tank Gauging system from Enraf
Vibration, Speed and Temperature monitoring system from Bentley Nevada.
Anti surge control system from Compressor Control Corporation, Petrotech.
Rotork Pakscan Two wire Control for MOV control & monitoring.
Field Instruments from Micro motion, Taylor, Honeywell, Sapag, Keystone, Masonélan, Foxboro, Rosemount, Fisher, Bentley Nevada, Enraf, Rotork, Magnetrol, Wika.
Professional Experience

Working for Petroleum Development Oman as an Instrumentation Trainer, from 2005
Active participation of Technician Omanisation Program(TOP) and Omani Technician Training Program (OTTP). Responsible for developing, delivering and evaluating classroom training to the fresh graduates to on the job application. To ensure the trainee candidates achieve the required level of competence in knowledge and skill, their performance being assessed periodically in line with NVQ level 2&3 programme(assessing candidate performance and assessing candidate different sources of evidence respectively).

Design/ Develop and deliver corporate Technical short courses (fit for purpose) for Established Technicians such as: Basic DCS (Honeywell/ Foxboro), Anti surge control, Fundamentals of Vibration, PLC and Logic Trouble Shooting, IA Compressor Instrumentation, Intrinsic Safety,
Interpretation of Engineering documents and Drawings.

Career History:

Employed by Client Position Project/ Plant Duration
Q-TECH Qatar Petroleum Inst. Engineer Offshore Project Halul Year 2004
Indtech Spc. ALBA Inst. Engineer Phase II Year 2003-04
Samco I/A service Various Eng- Coordinator Various Year 2002, 1995-97
Petrocon, Brunei BLNG Inst. Trainer BLNG Year 2000-2001
T.K.K.Japan BLNG/ GASCO Inst. Engineer BLNG/GASCO Year 1997-1999
Dodsal Ltd. ADCO Abu-Dhabi Field Engineer Buhasa gas injection, Year1994-1995
Dodsal Ltd. PDO Oman Inst Supervisor GGP Extn-II Yibal Year1992
Dodsal Ltd. NOC Iraq Inst Supervisor SOF Development Year1990
Dodsal Ltd. IPCL Inst Supervisor MGCC Year1990
Dodsal Ltd. PIL Inst Supervisor PIL Year1989
Al-Hassan PDO Oman Inst. Supervisor Marmul gas collection &de-watering, Oil gathering Station Yibal, Gas lift-Suwaihat, Hasirah, ORC Expansion Year 1986-1988
ICB Ltd. India L&T Cement Plant, Reliance Polyester ind., HPCL, CRL Inst. Supervisor Cement plant, Polyester industries, Petroleum refinery, Year1983-86

Details of Previous Experience will be supplied upon request

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 9906)

Go to Search Parameters...

Brief Description

I am having 14 years of experience in Instrumentation design, construction and commissioning activities in the field of refineries, fertilizer units and Oil & Gas. From last three and half years I am working in Nigeria for major oil & gas giants like SHELL, TOTAL, AGIP and EXXON MOBIL for their upst

Having 15 years Experience in Instrumentation and Control in Oil & Gas, Refineries (FCCU, CDU units), NGL Plant, Gas plant,LNG plant and Petrochemical Plants, Pox Unit, Process gas compressors, Gas Turbine generator (GTG) Units. Work Exposure of Performing safety critical, Operatability critical pr

- Self reliant, reliable self starter, Wide knowledge of control and process instrumentation, Experience in risk and hazardous operations analysis, Good team worker

Seeking middle level management post having 17 years of experience in the field of utilites(HP Boiler(Gas/Oil fired),RO/DM PLANT,COOLING TOWERS,AIR COOLED CONDENSER AND MULTIPLE EVAPORATOR

16 years of experience as a highly organized Executive in Oil & Gas Based Infrastructure / Construction and Electricity Management Companies; effective at multitasking and working under pressure to accomplish overall objectives.

20 Years of consolidated experience in classroom and on the Job Training and discipline specific Competence Assurance Assessment in the Oil and Gas Industry. EPC&C and maintenance activities in Petrochemical, Refinery, LNG, LPG, Power generation plant, Cement plant, Desalination plant, Revamping and

Presently Marine & HSE Supt on board FPSO ABO for 2 years. Total 4 Years FPSO Experience . 15 years on Tankers

20 years working on oil refinery as a tank farm panel operator.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Over 30 years of experience in I&E Construction for oil & gas and petrochem. industries includes onshore and offshore. Of this, 25 yrs in Supervisory and project management.

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

I have experience in procurement management, asset management systems, advanced supplier relationships, major supply agreements, ISO quality, procedure development, business development, sales and marketing. My reputation is based on integrity, proven supply strategies, measurable deliverables and

Piping Designer. Petro-chem & Power background; design in 2D and 3D environments.

Overall Exp. 14+ years.

Positive, self-motivated and results-driven, a proactive and confident professional with extensive expertise gained in an environment where accuracy and attention to detail are vital. Capable of utilising resources, both human and material, to streamline workflow and achieve time-sensitive deadline

An experienced Training & Development Manager used to setting up training projects for classroom, workshop and competency based models within the O&G inductries.

Condition monitoring engineer, rotating machinery engineer, mechanical engineer, maintenanace engineer

Reservoir Engineer with proven record of accomplishments. Extensive experience in pressure analysis, property evaluation, reserves determination, operations, and computer modelling with a skill for enhancing company value. Proven ability to find additional reserves where others have already looked.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Geoscientist with over 20 years experience with major oil companies in Europe and South America in exploration, production and business development projects.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

. I have sixteen years refinery experience for four location – Texaco Port Arthur, Basis petroleum Krotz Springs - Louisiana, Basis petroleum Houston – Texas and Basis petroleum Texas City refinery. Basis petroleum has been acquired by Valero in 1997.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Supervise small and mid-sized projects involving maintenance/rehabilitation/repair of pipelines and piping systems, good experience at piping equipment selection and sizing, experience with pigging facilities design, experience at pipeline pigging, fluent in English, French and Arabic

•Worked as commissioning Engineer and Project Liaison Manager in four major Petrochemicals (Polymer) projects, worth $30 Million, $50 Million, $20 Millions and again $20 Millions.

I am an AWS-Certified Welding Inspector and a Philippine licensed Mechanical Engineer with 15 years experience in Welding/Piping/Structural/Tanks inspection.

INSTRUMENTATION ENGINEER

I&C ENGINEER. ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING

Technical / Lead Safety Engineer

NDT inspector LVL II

M.E in Instrumentation Engineering with 16 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

Senior Instrument engineer with more than 13 years experiences in Oil, Gas, petrochemical and off-shore fields

EPC Attorney with Land Development and Regulatory Experience

Free! Lead/Senior Piping Designer

Sr. PDS Piping Designers / Design Piping Engineer

Senior Offshore Structural Engineer

14 year experience in international/ multicultural mid- and large scale oil & gas projects in polar areas of Russian Federation in both Contractor’s and Client’s role. Working to Russian and Western standards. Planning, cost, controls and certification for construction and commissioning.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out