Resume - Registered Electronics and Communications Engineer of the Philippines with 7-yea...

Misco Jobs

Resume #65372

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Registered Electronics and Communications Engineer of the Philippines with almost 7-years experience in Petrochemical and Oleochemical industries in the field of instrumentation and control systems maintenance engineering and commissioning.

Previously worked as Instrumentation and DCS Engineer in the Philippines for 5 years and 1 year management experience as Executive Director of an non-for-profit environmental policy advocacy organization. Presently working as Instrument Technician in Arabian Petrochemical Company polyethylene plant in Al-Jubail City, KSA for almost 2 years.

Key Competencies;

1. Configuration of Yokogawa CS 3000 DCS from field instrumentation, IOM selection, Field Control Station setup, networking, Human Interface Station setup, Function Block detailing and graphic designing.
2. Configuration of Triconex PLC for ESD/F&G from field instrumentation, rack loading and interconnection, IOM selection, networking and engineering station setup. Basic programming skills.
3. Troubleshooting and repair, process and equipment-based, especially major equipment instrumentation and controls such as in extruders, boilers, compressors, air dryers, and other dedicated systems for Machine Monitoring System (Bently Nevada), Product Conveying System (Siemens S7 400) and Loss Weight System by Acrison Multi-feeder Controller MD-2000.
4. Experience with TDC 3000, Modicon PLC, HMI-SCADA under Simatic S7 400 in Windows Control Centre V.6.
5. Excellent exposure in Permit to Work System and a certified permit receiver for Control System jobs.
6. Understands the application of Reliability Centered Maintenance, Process Safety Management, Safety Health and Environmental Management System along with auditing procedures applicable in most industries such as DNV and self-audit schemes.
7. Excellent technical writing skills in preparing technical manuals/reports, standard operating procedures, project proposals and feasibility studies.
8. Understands the underlying principles of selection and design of field instruments such as valves, flow, pressure, temperature, and level transmitters with bias on economics and maintainability.
9. Understands the design life cycle of Safety Instrumented Systems and Basic Process Control Systems. And knowledgeable with the standards/recommended practices involved in design specifications thereof.

------------
WORK EXPERIENCE:
------------
March 2006 to Arabian Petrochemical Company (PETROKEMYA)
present Polyethylene Plant

Employer Al-Hugayet Contracting Establishment, Kingdom of Saudi Arabia

Position Instrument Technician

(Arabian Petrochemical Company referred to as "PETROKEMYA" is wholly owned by Saudi Basic Industries Corporation "SABIC". Its Polyethylene Plant was commissioned in year 2004 which produces 800 Metric Tons per Year of LLDPE and HDPE with around 18,000 control loops.)

Skills gained in this experience:
Advance maintenance skills in instrumentation and control system, heightened level of awareness to safety, health and environmental issues in a Petrochemical Industry. Understand the boundaries of Total Quality Management and Safety Health and Environmental Management System in achieving company goals with respect to activities/ functions of instrumentation and control system team.

Duties and Responsibilities:
1. Maintain all DCS Human Interface Stations, Engineering Work Stations and Field Control Stations.
2. Prepare Preventive Maintenance schedules and plan/review necessary requirements.
3. Ensure that all safety, quality and environmentally critical instruments maintenance procedures are strictly followed.
4. Train incoming instrument technicians to be familiar with effective plant maintenance skills required and orient trainees with the hazards on the job.
5. Carryout all major breakdown jobs which requires critical decisions.

Special Projects Handled:

SABIC Total Reliability Program STRP4 Instrument Classification

The project was to modify existing SAP instrument data entries and include a classification according to type and service.
1. Classify all field/control room instruments an log entries in the database for SAP uploading..
2. Review all engineering documents and compare records from actual field conditions.

Alarm Segregation of all DCS Tags

A DCS modification project made to rectify alarm recurrence in the Human Interface Station and to enhance operator performance.
1. Classify all DCS function blocks and annunciator tags per equipment in the Plant Hierarchy.
2. Modify operator guide messages and logic charts.
3. Add annunciators tags as per operations requirement.

February 2005 to Buhing Singgit Lanog Alang sa Kinaiyahan "Hopeful Voices for Nature"
February 2006 Poblacion, Tubod, Lanao del Norte, Philippines

Position Executive Director

(Buhing Singgit Lanog Alang sa Kinaiyahan, a youth group for environmental protection which was established in 1990 by the Redemptorist Itinerant Mission Team.)

Skills gained in this experience:
Heightened level of environmental awareness, strategizing advocacy policies and approach, people handling, organizing, management skills and advance skill in technical writing of project proposals, administrative procedures, training manuals, and feasibility studies.

Duties and Responsibilities:
1. Overall Management, Administration and Supervision of BUSILAK
a. Manages and directs the overall operations of BUSILAK;
b. Sits as ex-officio member of the Board of Directors that sets guidelines and policies and general directions of BUSILAK;
2. Networking and Fund Sourcing a. Establishes continuing linkages with NGOs, peoples' organizations, government agencies, academe, prospective local and international donors, and other private institutions;
b. Drafts project proposals to potential funding partners;

June 2000 to Primo Oleochemicals Incorporated
December 2004 Osmeña, Jose Panganiban, Camarines Norte, Philippines

Position Instrumentation and DCS Engineer

(Primo Oleochemicals Inc. is the first commercial – scale Natural Detergent Alcohol Plant in the world developed by the Davy Process Technology of the United Kingdom. It produces15,650 MTPY of Fatty Acid, 6,560 MTPY of Refined Glycerine and 30,000 MTPY of Fatty Alcohol.)

Skills gained in this experience:
Maintenance skills in instrumentation and control systems, electrical systems (high voltage & low voltage), strategic planning of maintenance activities towards achieving systems reliability.

Duties and Responsibilities:

(Commissioning and Start-up)
1. Coordinates with the Electrical and Instrumentation Head on all works appertaining to maintenance and schedules during the recommissioning of the entire plant.
2. Plan and detail weekly workloads and ensure that all jobs were carried out as per schedule.
3. Undertake all maintenance activities with a team of electrical and instrument technicians.
4. Supervise contractor activities.

(Maintenance Engineering and Support)
1. Outlined all calibration and maintenance procedures of instruments.
2. Review all engineering documents and ensure that all records are intact and technically sound.
3. Plan, implement and manage maintenance activities and ensure its coherence to company policies.
4. Responsible for the control of spare parts inflows and outflows to optimize warehouse inventories.
5. Perform Root Cause of Failure Analysis.

------------
EDUCATION & CERTIFICATION:
------------
REGISTERED ELECTRONICS AND COMMUNICATIONS ENGINEER
Professional Regulation Commission, Republic of the Philippines
Date Registered: December 11, 2000
License No. 0022763

College Bachelor of Science in Electronics and Communications Engineering (BSECE)
Cebu Institute of Technology, N. Bacalso Street, Cebu City, Philippines
June 1997-March 2000

Vocational Diploma in Electronics Engineering Technology major in Industrial Electronics (Ladderized to BSECE)
Mindanao State University – Iligan Institute of Technology
Tibanga, Iligan City, Philippines
June 1994-April 1997

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3551 to 3600 of 9777)

Go to Search Parameters...

Brief Description

i have total 9 years experiance in oil and gas ,petrochenical industry.at present iam working in petroleum Development oman.oman.

Tubular running services technician

Engineering graduate with 25 years experience of working on Offshore Jack Up Rigs & Deep Drilling Land Rigs up to the position of Drilling Supervisor (Role included Efficient Operation & Implementation of HSE Policy).Working as IWCF/IADC Instructor , Drilling Consultant, Senior DrillingEngineer

Hard-working, Self Starter Finance Specialist

Diploma holder in mechanical engg,12 yrs of exp in Marine , oil and gas project execution.

I am totally involved in safety field from last 11 yrs, and having 15 yrs Indian Navy service, having Indurtial security diploma form mumbai and many advance courses duirng present service.

Field engineer specialized in MWD jobs and MWD / LWD Technician

Quality, Health and Safety, Environment Engineer

Petroleum exploration 15 yrs, environmental/geotech consulting 15 yrs

I am Oil field production operator

Good command of responsibility and leadership skills, Ability to work under pressure, Co-operative and self motivated, good computer skills, and excellent reporting skills, as well as presentation skills

Engineering graduate with MBA having about 2 decades of experience in developing and administering Contracts in Oil& Gas, Petrochemical and Engineering fields. Skills include Strategy development, Risk analysis, develop Contract documents, Evaluation/negotiation and award, Contract management.

LEADHAND, SHOP FOREMAN, HEAVY DUTY MECHANIC

WOULD YOU LIKE TO HIRE A UTILITIES UNIT EXPERT, HAVE MORE THAN TEN YEAR PROVEN EXPERIENCE, RECOGNIZED AS PRODUCTION UNIT STAR IN YEAR 2005 FOR UNBEATABLE PERFORMANCE. EXPERIENCED IN OPERATION OF MAJOR UTILITIES UNIT EQUIPMENTS DCS PANEL OPERATION, GAS TURBINES, SWITCH GEAR ROOMS, STEAM GENERATOR, AI

Marine Engineer with 7 years expereince

M.B.A. Marketing/ Engineering in mechanical

Higly qualified maritime crane operator seeking new challenges on (new) drilling units with state of the art cranes.

Process Design Engineer

3D plant design modeling Plant Design System (PDS), MICROSTATION ,AUTOCAD 14 to 2004, , CADWORX, Smart plant review ,for piping layout, structural steel and pipe supports, equipment modeling, isometrics and BOMs.

Registered Electronics and Communications Engineer of the Philippines with 7-years experience in Petrochemical and Oleochemical Industry

Over 16 years experience in 2D and 3D seismic acquisition and processing projects: Currently at Kelman Technologies International Tripoli Processing Centre, involved in both 2D and 3D testing. In addition, doing the user support at KTI Tripoli and in charge of the system admin Sun and Linux

Instrument ( Pre-Commissioning & Commissioning ), Maintenanance, Supervising, Technician

I am a qualified Instrumentation Diploma Engineer and having 10 years of well experience in instrumentation field of Maintenance, Commissioning, Installation and Shutdown activities in oil and gas well heads, petroleum refinery, petrochemical and power plant industries.

Experienced Mudlogging Geologist

A highly skilled Well Site Geologist over 15+ years experience for shell Oman include 11 years with Baker Hughes Inteq, worked mostly in (vertical, deviated and horizontal) deep high pressure and temperature gas wells (include the deepest gas well in North Oman 6235 m), some exploration and develo

Experience in Marine construction of port and breakwater.

22 years of diverse experience in the Oil and Gas Industry in support and professional positions

Knowledgeable in Procurement, Materials Management and Piping.

I want to improve my skill and knowledge, get good experiences about exploration and production,Drilling Prosses (Over Balance and Underbalance Drilling System), surface production facility and processing plant including Sulfure recovery unit (SRU),Back pressure Valve for safety Rig Drilling and wor

MBA Finance, Basicaly technically minded person having all rounder capbilities

11 YEAR ON SHORE AND OFF SHORE WORKING EXPERIEANCE IN SLICKLINE KNOWLEGE OF WIDE RANGE OF DOWNHOLE TOOLS AND EQUIPMENT SUCH AS BAKER OTIS PETROLINE WEATHERFORD ETC.

To secure a challenging position Operations Supervisor/Logistics executive, utilizing my proven abilities developed through my experience to promote the growth of the organization, Involved in supervisory and technical administration for the clients through a focused approach.

Corrosion Engineer with 5 years of experiance in DownStream Oil and Gas

Over 8 (Eight) years of experience in Construction Welding Inspection, painting Inspection,NDT, QualityControl/Qality Assurance, surveillance, execution, co-ordination,hydro testing and destructive testing in the field of refineries,petro chemicals, fabrication yards and offshore platforms.

6 years exp in piping design engg field

Plant operator/ production operator/ field operator/ commissioining operator

Accomplished professional career skills acquired in the Petroleum Industry, Financial Market, and a 20 year Business Entrepreneurship to transition perfectly into the challenging requirements of a Petroleum Landman.

Expertized in Project management, Implementaion of Policies and Proficient in MS Office, Completed MBA(Management Information System)

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

I am a conscientious, reliable and hard working person, capable of fulfilling responsibilities, following instructions accurately and working under pressure to tight deadlines. I get on well with other people and I am a supportive team player. I have 11 years extensive experience of work in accounti

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

Analysis Estimation-Officer 10 years as operations engineer in power plant

HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 [ 72 ] 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out